Re: [PATCH v10 4/5] watchdog: Add RAVE SP watchdog driver

From: Guenter Roeck
Date: Tue Oct 31 2017 - 13:21:44 EST

Next message: Guenter Roeck: "Re: [PATCH v10 5/5] dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver"
Previous message: Martin K. Petersen: "Re: [PATCH v2] target/iscsi: Convert timers to use timer_setup()"
In reply to: Andrey Smirnov: "[PATCH v10 4/5] watchdog: Add RAVE SP watchdog driver"
Next in thread: Andrey Smirnov: "[PATCH v10 5/5] dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Oct 31, 2017 at 09:36:55AM -0700, Andrey Smirnov wrote:
> This driver provides access to RAVE SP watchdog functionality.
>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-watchdog@xxxxxxxxxxxxxxx
> Cc: cphealy@xxxxxxxxx
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Pavel Machek <pavel@xxxxxx>
> Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Johan Hovold <johan@xxxxxxxxxx>
> Cc: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

> ---
> drivers/watchdog/Kconfig | 7 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/rave-sp-wdt.c | 349 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 357 insertions(+)
> create mode 100644 drivers/watchdog/rave-sp-wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index c722cbfdc7e6..533a72248cd1 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -223,6 +223,13 @@ config ZIIRAVE_WATCHDOG
> To compile this driver as a module, choose M here: the
> module will be called ziirave_wdt.
>
> +config RAVE_SP_WATCHDOG
> + tristate "RAVE SP Watchdog timer"
> + depends on RAVE_SP_CORE
> + select WATCHDOG_CORE
> + help
> + Support for the watchdog on RAVE SP device.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 56adf9fa67d0..5c9556c09f6e 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -223,3 +223,4 @@ obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
> obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> +obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
> diff --git a/drivers/watchdog/rave-sp-wdt.c b/drivers/watchdog/rave-sp-wdt.c
> new file mode 100644
> index 000000000000..8a2943f7c123
> --- /dev/null
> +++ b/drivers/watchdog/rave-sp-wdt.c
> @@ -0,0 +1,349 @@
> +/*
> + * rave-sp-wdt.c - Watchdog driver present in RAVE SP
> + *
> + * Copyright (C) 2017 Zodiac Inflight Innovation
> + *
> + * Driver for parent device can be found in drivers/mfd/rave-sp.c
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/rave-sp.h>
> +#include <linux/reboot.h>
> +#include <linux/slab.h>
> +#include <linux/watchdog.h>
> +
> +enum {
> + RAVE_SP_RESET_BYTE = 1,
> + RAVE_SP_RESET_REASON_NORMAL = 0,
> + RAVE_SP_RESET_DELAY_MS = 500,
> +};
> +
> +/**
> + * struct rave_sp_wdt_variant - RAVE SP watchdog variant
> + *
> + * @max_timeout: Largest possible watchdog timeout setting
> + * @min_timeout: Smallest possible watchdog timeout setting
> + *
> + * @configure: Function to send configuration command
> + * @restart: Function to send "restart" command
> + */
> +struct rave_sp_wdt_variant {
> + unsigned int max_timeout;
> + unsigned int min_timeout;
> +
> + int (*configure)(struct watchdog_device *, bool);
> + int (*restart)(struct watchdog_device *);
> +};
> +
> +/**
> + * struct rave_sp_wdt - RAVE SP watchdog
> + *
> + * @wdd: Underlying watchdog device
> + * @sp: Pointer to parent RAVE SP device
> + * @variant: Device specific variant information
> + * @reboot_notifier: Reboot notifier implementing machine reset
> + */
> +struct rave_sp_wdt {
> + struct watchdog_device wdd;
> + struct rave_sp *sp;
> + const struct rave_sp_wdt_variant *variant;
> + struct notifier_block reboot_notifier;
> +};
> +
> +static struct rave_sp_wdt *to_rave_sp_wdt(struct watchdog_device *wdd)
> +{
> + return container_of(wdd, struct rave_sp_wdt, wdd);
> +}
> +
> +static int rave_sp_wdt_exec(struct watchdog_device *wdd, void *data,
> + size_t data_size)
> +{
> + return rave_sp_exec(to_rave_sp_wdt(wdd)->sp,
> + data, data_size, NULL, 0);
> +}
> +
> +static int rave_sp_wdt_legacy_configure(struct watchdog_device *wdd, bool on)
> +{
> + u8 cmd[] = {
> + [0] = RAVE_SP_CMD_SW_WDT,
> + [1] = 0,
> + [2] = 0,
> + [3] = on,
> + [4] = on ? wdd->timeout : 0,
> + };
> +
> + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
> +}
> +
> +static int rave_sp_wdt_rdu_configure(struct watchdog_device *wdd, bool on)
> +{
> + u8 cmd[] = {
> + [0] = RAVE_SP_CMD_SW_WDT,
> + [1] = 0,
> + [2] = on,
> + [3] = (u8)wdd->timeout,
> + [4] = (u8)(wdd->timeout >> 8),
> + };
> +
> + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
> +}
> +
> +/**
> + * rave_sp_wdt_configure - Configure watchdog device
> + *
> + * @wdd: Device to configure
> + * @on: Desired state of the watchdog timer (ON/OFF)
> + *
> + * This function configures two aspects of the watchdog timer:
> + *
> + * - Wheither it is ON or OFF
> + * - Its timeout duration
> + *
> + * with first aspect specified via function argument and second via
> + * the value of 'wdd->timeout'.
> + */
> +static int rave_sp_wdt_configure(struct watchdog_device *wdd, bool on)
> +{
> + return to_rave_sp_wdt(wdd)->variant->configure(wdd, on);
> +}
> +
> +static int rave_sp_wdt_legacy_restart(struct watchdog_device *wdd)
> +{
> + u8 cmd[] = {
> + [0] = RAVE_SP_CMD_RESET,
> + [1] = 0,
> + [2] = RAVE_SP_RESET_BYTE
> + };
> +
> + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
> +}
> +
> +static int rave_sp_wdt_rdu_restart(struct watchdog_device *wdd)
> +{
> + u8 cmd[] = {
> + [0] = RAVE_SP_CMD_RESET,
> + [1] = 0,
> + [2] = RAVE_SP_RESET_BYTE,
> + [3] = RAVE_SP_RESET_REASON_NORMAL
> + };
> +
> + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
> +}
> +
> +static int rave_sp_wdt_reboot_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + /*
> + * Restart handler is called in atomic context which means we
> + * can't communicate to SP via UART. Luckily for use SP will
> + * wait 500ms before actually resetting us, so we ask it to do
> + * so here and let the rest of the system go on wrapping
> + * things up.
> + */
> + if (action == SYS_DOWN || action == SYS_HALT) {
> + struct rave_sp_wdt *sp_wd =
> + container_of(nb, struct rave_sp_wdt, reboot_notifier);
> +
> + const int ret = sp_wd->variant->restart(&sp_wd->wdd);
> +
> + if (ret < 0)
> + dev_err(sp_wd->wdd.parent,
> + "Failed to issue restart command (%d)", ret);
> + return NOTIFY_OK;
> + }
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int rave_sp_wdt_restart(struct watchdog_device *wdd,
> + unsigned long action, void *data)
> +{
> + /*
> + * The actual work was done by reboot notifier above. SP
> + * firmware waits 500 ms before issuing reset, so let's hang
> + * here for twice that delay and hopefuly we'd never reach
> + * the return statement.
> + */
> + mdelay(2 * RAVE_SP_RESET_DELAY_MS);
> +
> + return -EIO;
> +}
> +
> +static int rave_sp_wdt_start(struct watchdog_device *wdd)
> +{
> + int ret;
> +
> + ret = rave_sp_wdt_configure(wdd, true);
> + if (!ret)
> + set_bit(WDOG_HW_RUNNING, &wdd->status);
> +
> + return ret;
> +}
> +
> +static int rave_sp_wdt_stop(struct watchdog_device *wdd)
> +{
> + return rave_sp_wdt_configure(wdd, false);
> +}
> +
> +static int rave_sp_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + wdd->timeout = timeout;
> +
> + return rave_sp_wdt_configure(wdd, watchdog_active(wdd));
> +}
> +
> +static int rave_sp_wdt_ping(struct watchdog_device *wdd)
> +{
> + u8 cmd[] = {
> + [0] = RAVE_SP_CMD_PET_WDT,
> + [1] = 0,
> + };
> +
> + return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
> +}
> +
> +static const struct watchdog_info rave_sp_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "RAVE SP Watchdog",
> +};
> +
> +static const struct watchdog_ops rave_sp_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = rave_sp_wdt_start,
> + .stop = rave_sp_wdt_stop,
> + .ping = rave_sp_wdt_ping,
> + .set_timeout = rave_sp_wdt_set_timeout,
> + .restart = rave_sp_wdt_restart,
> +};
> +
> +static const struct of_device_id rave_sp_wdt_of_match[] = {
> + { .compatible = "zii,rave-sp-watchdog" },
> + {}
> +};
> +
> +static const struct rave_sp_wdt_variant rave_sp_wdt_legacy = {
> + .max_timeout = 255,
> + .min_timeout = 1,
> + .configure = rave_sp_wdt_legacy_configure,
> + .restart = rave_sp_wdt_legacy_restart,
> +};
> +
> +static const struct rave_sp_wdt_variant rave_sp_wdt_rdu = {
> + .max_timeout = 180,
> + .min_timeout = 60,
> + .configure = rave_sp_wdt_rdu_configure,
> + .restart = rave_sp_wdt_rdu_restart,
> +};
> +
> +static const struct of_device_id rave_sp_wdt_variants[] = {
> + { .compatible = COMPATIBLE_RAVE_SP_NIU, .data = &rave_sp_wdt_legacy },
> + { .compatible = COMPATIBLE_RAVE_SP_MEZZ, .data = &rave_sp_wdt_legacy },
> + { .compatible = COMPATIBLE_RAVE_SP_ESB, .data = &rave_sp_wdt_legacy },
> + { .compatible = COMPATIBLE_RAVE_SP_RDU1, .data = &rave_sp_wdt_rdu },
> + { .compatible = COMPATIBLE_RAVE_SP_RDU2, .data = &rave_sp_wdt_rdu },
> + { /* sentinel */ }
> +};
> +
> +static int rave_sp_wdt_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct of_device_id *id;
> + struct watchdog_device *wdd;
> + struct rave_sp_wdt *sp_wd;
> + struct nvmem_cell *cell;
> + __le16 timeout = 0;
> + int ret;
> +
> + id = of_match_device(rave_sp_wdt_variants, dev->parent);
> + if (!id) {
> + dev_err(dev, "Unknown parent device variant. Bailing out\n");
> + return -ENODEV;
> + }
> +
> + sp_wd = devm_kzalloc(dev, sizeof(*sp_wd), GFP_KERNEL);
> + if (!sp_wd)
> + return -ENOMEM;
> +
> + sp_wd->variant = id->data;
> + sp_wd->sp = dev_get_drvdata(dev->parent);
> +
> + wdd = &sp_wd->wdd;
> + wdd->parent = dev;
> + wdd->info = &rave_sp_wdt_info;
> + wdd->ops = &rave_sp_wdt_ops;
> + wdd->min_timeout = sp_wd->variant->min_timeout;
> + wdd->max_timeout = sp_wd->variant->max_timeout;
> + wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
> + wdd->timeout = 60;
> +
> + cell = nvmem_cell_get(dev, "wdt-timeout");
> + if (!IS_ERR(cell)) {
> + size_t len;
> + void *value = nvmem_cell_read(cell, &len);
> +
> + if (!IS_ERR(value)) {
> + memcpy(&timeout, value, min(len, sizeof(timeout)));
> + kfree(value);
> + }
> + nvmem_cell_put(cell);
> + }
> + watchdog_init_timeout(wdd, le16_to_cpu(timeout), dev);
> + watchdog_set_restart_priority(wdd, 255);
> +
> + sp_wd->reboot_notifier.notifier_call = rave_sp_wdt_reboot_notifier;
> + ret = devm_register_reboot_notifier(dev, &sp_wd->reboot_notifier);
> + if (ret) {
> + dev_err(dev, "Failed to register reboot notifier\n");
> + return ret;
> + }
> +
> + /*
> + * We don't know if watchdog is running now. To be sure, let's
> + * start it and depend on watchdog core to ping it
> + */
> + wdd->max_hw_heartbeat_ms = wdd->max_timeout * 1000;
> + ret = rave_sp_wdt_start(wdd);
> + if (ret) {
> + dev_err(dev, "Watchdog didn't start\n");
> + return ret;
> + }
> +
> + return devm_watchdog_register_device(dev, wdd);
> +}
> +
> +static struct platform_driver rave_sp_wdt_driver = {
> + .probe = rave_sp_wdt_probe,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = rave_sp_wdt_of_match,
> + },
> +};
> +
> +module_platform_driver(rave_sp_wdt_driver);
> +
> +MODULE_DEVICE_TABLE(of, rave_sp_wdt_of_match);
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@xxxxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@xxxxxxxxx>");
> +MODULE_DESCRIPTION("RAVE SP Watchdog driver");
> +MODULE_ALIAS("platform:rave-sp-watchdog");
> --
> 2.13.6
>

Next message: Guenter Roeck: "Re: [PATCH v10 5/5] dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver"
Previous message: Martin K. Petersen: "Re: [PATCH v2] target/iscsi: Convert timers to use timer_setup()"
In reply to: Andrey Smirnov: "[PATCH v10 4/5] watchdog: Add RAVE SP watchdog driver"
Next in thread: Andrey Smirnov: "[PATCH v10 5/5] dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]