Re: [PATCH v2] i2c: xgene-slimpro: Support v2
From: Hoan Tran
Date: Tue Oct 31 2017 - 16:28:00 EST
Hi Andy,
On Tue, Oct 31, 2017 at 2:14 AM, Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
> On Mon, 2017-10-30 at 15:24 -0700, Hoan Tran wrote:
>> This patch supports xgene-slimpro-i2c v2 which uses the non-cachable
>> memory
>> as the PCC shared memory.
>>
>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> (I'm totally fine with ACPI bits here, for the rest I hope it had been
> tested and works as expected)
Yes, it had been tested.
Thanks
Hoan
>
>> Signed-off-by: Hoan Tran <hotran@xxxxxxx>
>> ---
>> v2:
>> - Remove un-necessary ifdef CONFIG_ACPI
>> - Use acpi_match_table pointer from pdev
>> - Use MEMREMAP_WT for non-cachable memory
>>
>> drivers/i2c/busses/i2c-xgene-slimpro.c | 30
>> ++++++++++++++++++++++++++----
>> 1 file changed, 26 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c
>> b/drivers/i2c/busses/i2c-xgene-slimpro.c
>> index 7e89ba6..a7ac746 100644
>> --- a/drivers/i2c/busses/i2c-xgene-slimpro.c
>> +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
>> @@ -129,6 +129,11 @@ struct slimpro_i2c_dev {
>> #define to_slimpro_i2c_dev(cl) \
>> container_of(cl, struct slimpro_i2c_dev, mbox_client)
>>
>> +enum slimpro_i2c_version {
>> + XGENE_SLIMPRO_I2C_V1 = 0,
>> + XGENE_SLIMPRO_I2C_V2 = 1,
>> +};
>> +
>> /*
>> * This function tests and clears a bitmask then returns its old
>> value
>> */
>> @@ -476,6 +481,15 @@ static int xgene_slimpro_i2c_probe(struct
>> platform_device *pdev)
>> }
>> } else {
>> struct acpi_pcct_hw_reduced *cppc_ss;
>> + const struct acpi_device_id *acpi_id;
>> + int version = XGENE_SLIMPRO_I2C_V1;
>> +
>> + acpi_id = acpi_match_device(pdev->dev.driver-
>> >acpi_match_table,
>> + &pdev->dev);
>> + if (!acpi_id)
>> + return -EINVAL;
>> +
>> + version = (int)acpi_id->driver_data;
>>
>> if (device_property_read_u32(&pdev->dev, "pcc-
>> channel",
>> &ctx->mbox_idx))
>> @@ -514,9 +528,16 @@ static int xgene_slimpro_i2c_probe(struct
>> platform_device *pdev)
>> */
>> ctx->comm_base_addr = cppc_ss->base_address;
>> if (ctx->comm_base_addr) {
>> - ctx->pcc_comm_addr = memremap(ctx-
>> >comm_base_addr,
>> - cppc_ss-
>> >length,
>> - MEMREMAP_WB);
>> + if (version == XGENE_SLIMPRO_I2C_V2)
>> + ctx->pcc_comm_addr = memremap(
>> + ctx-
>> >comm_base_addr,
>> + cppc_ss-
>> >length,
>> + MEMREMAP_WT);
>> + else
>> + ctx->pcc_comm_addr = memremap(
>> + ctx-
>> >comm_base_addr,
>> + cppc_ss-
>> >length,
>> + MEMREMAP_WB);
>> } else {
>> dev_err(&pdev->dev, "Failed to get PCC comm
>> region\n");
>> rc = -ENOENT;
>> @@ -581,7 +602,8 @@ MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
>>
>> #ifdef CONFIG_ACPI
>> static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
>> - {"APMC0D40", 0},
>> + {"APMC0D40", XGENE_SLIMPRO_I2C_V1},
>> + {"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
>> {}
>> };
>> MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
>
> --
> Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Intel Finland Oy