[PATCH v3 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link to smaller functions

From: Niklas Cassel
Date: Tue Oct 31 2017 - 18:40:53 EST


This is done to better match other drivers such as dra7xx and imx6,
but also to prepare for endpoint mode support.

Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
---
V3:
* No change.

drivers/pci/dwc/pcie-artpec6.c | 53 +++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 18075e0fab80..3b635e745d25 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -80,18 +80,23 @@ static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
}

-static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
+static int artpec6_pcie_establish_link(struct dw_pcie *pci)
{
- struct dw_pcie *pci = artpec6_pcie->pci;
- struct pcie_port *pp = &pci->pp;
+ struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
u32 val;
- unsigned int retries;

- /* Hold DW core in reset */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val |= PCIECFG_CORE_RESET_REQ;
+ val |= PCIECFG_LTSSM_ENABLE;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);

+ return 0;
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;
+ unsigned int retries;
+
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */
PCIECFG_MODE_TX_DRV_EN |
@@ -131,30 +136,25 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
val = readl(artpec6_pcie->phy_base + PHY_STATUS);
retries--;
} while (retries && !(val & PHY_COSPLLLOCK));
+}
+
+static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;

- /* Take DW core out of reset */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val &= ~PCIECFG_CORE_RESET_REQ;
+ val |= PCIECFG_CORE_RESET_REQ;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
- usleep_range(100, 200);
+}

- /* setup root complex */
- dw_pcie_setup_rc(pp);
+static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;

- /* assert LTSSM enable */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val |= PCIECFG_LTSSM_ENABLE;
+ val &= ~PCIECFG_CORE_RESET_REQ;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
-
- /* check if the link is up or not */
- if (!dw_pcie_wait_for_link(pci))
- return 0;
-
- dev_dbg(pci->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
-
- return -ETIMEDOUT;
+ usleep_range(100, 200);
}

static void artpec6_pcie_enable_interrupts(struct artpec6_pcie *artpec6_pcie)
@@ -171,7 +171,12 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);

- artpec6_pcie_establish_link(artpec6_pcie);
+ artpec6_pcie_assert_core_reset(artpec6_pcie);
+ artpec6_pcie_init_phy(artpec6_pcie);
+ artpec6_pcie_deassert_core_reset(artpec6_pcie);
+ dw_pcie_setup_rc(pp);
+ artpec6_pcie_establish_link(pci);
+ dw_pcie_wait_for_link(pci);
artpec6_pcie_enable_interrupts(artpec6_pcie);

return 0;
--
2.14.2