[GIT PULL] License cleanup: add SPDX license identifiers to some kernel files

From: Greg KH
Date: Thu Nov 02 2017 - 11:16:23 EST


[resend without the full diffstat as lkml and some email systems didn't
like to see emails with 12k lines...]

Hi,

As discussed at the Maintainers Summit last week, here is a pull request
that adds some SPDX license identifiers to three different classes of
files:
- files with no license identifiers at all, but not uapi files
- uapi files with no license identifiers at all
- uapi files with existing license identifiers

This "only" touched 1/6 of the files in the tree. The remaining files
will be dealt with on a subsystem-by-subsystem basis over the next few
kernel releases.

The full methodology of how these files were determined, and how the
work was done is down below in the signed tag, and in the first commit
of the series.

These patches have a "new" timestamp, a few hours old, only because we
have revised and rewritten the changelog text many times based on lots
of people's inputs (lawyers included.) The patches themselves are not
"new" at all and were auto-generated as described below and are based on
4.14-rc6.

Note, we had to use /* */ as the comment marker for the .h files, as
there are just too many .h files being included into .S files to be able
to try to identify which is which, so we could not use //, unlike the .c
files.

These have been through 0-day testing with no reported problems, as well
as my build system and Thomas's build system.

thanks,

greg k-h

The following changes since commit bb176f67090ca54869fc1262c913aa69d2ede070:

Linux 4.14-rc6 (2017-10-23 06:49:47 -0400)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git/ tags/spdx_identifiers-4.14-rc8

for you to fetch changes up to e2be04c7f9958dde770eeb8b30e829ca969b37bb:

License cleanup: add SPDX license identifier to uapi header files with a license (2017-11-02 11:20:11 +0100)

----------------------------------------------------------------
License cleanup: add SPDX license identifiers to some files

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Philippe Ombredanne <pombredanne@xxxxxxxx>
Reviewed-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

----------------------------------------------------------------
Greg Kroah-Hartman (3):
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX license identifier to uapi header files with a license

Kbuild | 1 +
Kconfig | 1 +
Makefile | 1 +

[12585 files having 1 line added snipped to make vger happy. If anyone
wants the full the full diffstat, I can send it off-list.]

virt/kvm/coalesced_mmio.c | 1 +
virt/kvm/coalesced_mmio.h | 1 +
virt/kvm/vfio.h | 1 +
12591 files changed, 12591 insertions(+)