[PATCH v3] tty: serial: meson: allow baud-rates lower than 9600

[V10lator]

Devices like DCF77 receivers need the baud-rate to be as low as 50.

I have tested this on a Meson GXL device with uart_A.

Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxxx>
Cc: Carlo Caione <carlo@xxxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Cc: linux-amlogic@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Thomas Rohloff <v10lator@xxxxxxxx>
---
drivers/tty/serial/meson_uart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/meson_uart.c 
b/drivers/tty/serial/meson_uart.c
index 07c0f98be3ac..e281ce5d101d 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -362,7 +362,7 @@ static void meson_uart_set_termios(struct uart_port 
*port,

	writel(val, port->membase + AML_UART_CONTROL);

-	baud = uart_get_baud_rate(port, termios, old, 9600, 4000000);
+	baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
	meson_uart_change_speed(port, baud);

	port->read_status_mask = AML_UART_TX_FIFO_WERR;
--
2.13.6