[PATCH] usb: dwc2: host: fix isoc urb actual length

[William Wu]

The actual_length in dwc2_hcd_urb structure is used
to indicate the total data length transferred so far,
but in dwc2_update_isoc_urb_state(), it just updates
the actual_length of isoc frame, and don't update the
urb actual_length at the same time, this will cause
device drivers working error which depend on the urb
actual_length.

we can easily find this issue if use an USB cameraï
the userspace use libusb to get USB data from kernel
via devio driver.In usb devio driver, processcompl()
function will process urb complete and copy data to
userspace depending on urb actual_length.

Let's update the urb actual_length if the isoc frame
is valid.

Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
---
 drivers/usb/dwc2/hcd_intr.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 28a8210..01b1e13 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -580,6 +580,7 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state(
 		frame_desc->status = 0;
 		frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
 					chan, chnum, qtd, halt_status, NULL);
+		urb->actual_length += frame_desc->actual_length;
 		break;
 	case DWC2_HC_XFER_FRAME_OVERRUN:
 		urb->error_count++;
@@ -599,6 +600,7 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state(
 		frame_desc->status = -EPROTO;
 		frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
 					chan, chnum, qtd, halt_status, NULL);
+		urb->actual_length += frame_desc->actual_length;
 
 		/* Skip whole frame */
 		if (chan->qh->do_split &&
-- 
2.0.0