Re: [PATCH] clk: meson: gxbb: fix wrong clock for SARADC/SANA

[Yixun Lan]

Hi Martin

On 11/07/17 06:03, Martin Blumenstingl wrote:
> Hi Yixun,
> 
> On Mon, Nov 6, 2017 at 10:31 AM, Yixun Lan <yixun.lan@xxxxxxxxxxx> wrote:
>> Hi Neil:
>>
>>
>> On 11/06/17 16:57, Neil Armstrong wrote:
>>> On 06/11/2017 08:52, Yixun Lan wrote:
>>>> According to the datasheet, in Meson-GXBB/GXL series,
>>>> The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22],
>>>> while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10].
>>>>
>>>> Test passed at gxl_skt dev board.
>>>>
>>>> Tested-by: Xingyu Chen <xingyu.chen@xxxxxxxxxxx>
>>>> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
>>>>
>>>> ---
>>>> I think this error was introduced by a copy & paste from meson8 code?
>>>> and we didn't notice them due to the SANA clock is also enabled by
>>>> DTS (so SAR_ADC works fine)?
>>>> ---
>>>>  drivers/clk/meson/gxbb.c | 4 ++--
>>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
>>>> index b2d1e8ed7152..92168348ffa6 100644
>>>> --- a/drivers/clk/meson/gxbb.c
>>>> +++ b/drivers/clk/meson/gxbb.c
>>>> @@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6);
>>>>  static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7);
>>>>  static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8);
>>>>  static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9);
>>>> -static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10);
>>>> +static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10);
>>>>  static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11);
>>>>  static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12);
>>>>  static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13);
>>>> @@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
>>>>  static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11);
>>>>  static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12);
>>>>  static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15);
>>>> -static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22);
>>>> +static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22);
>>>>  static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25);
>>>>  static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
>>>>  static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29);
>>>>
>>>
>>> Hi Yixun,
>>>
>>> Can you precise how it affects the saradc driver ? from the DT and clk PoV ?
>>>
>> the saradc module doesn't require sana clock (it's irrelvevant), we will
>> send a patchset v3 to address this.
> is the SANA clock irrelevant for the SAR ADC on all SoCs (even
> Meson8/Meson8b/Meson8m2) or just on the GX SoCs?
> also, do you know what "SANA" stands for?
> 
> 
> Regards
> Martin
> 
> .
> 
the sana clock irrelevant for all SoCs (including meson8/8b/8m2)
SANA  stands for Stream Analyzer