hi Marc
normally, Alex take the last 3 ("ARM: dts")
commits in his branch, and will send in his pull request
Alex you confirm?
BR
Ludo
On 11/07/2017 12:23 PM, Marc Zyngier wrote:
Hi Ludovic,
On 06/11/17 17:03, Ludovic Barre wrote:
From: Ludovic Barre <ludovic.barre@xxxxxx>
This series adds:
-Management of multi-bank of external interrupts
stm32h7 has up to 96 inputs (3 banks of 32 inputs).
-Fix initial value after cold/hot boot (wakeup issue).
Changes v3:
-remove chip.name and handler, already done by
irq_alloc_domain_generic_chips
-add Rob ack in dt-bindings commit
Changes v2:
-Remove irq_mask and adds const on struct stm32_exti_bank
-Add wrapper functions pending and ack
-Replace BITS_PER_LONG by IRQS_PER_BANK
-Fill commit message on
"ARM: dts: stm32: add support of exti on stm32h743"
-Add system config bank for stm32h7
Ludovic Barre (9):
ÂÂ irqchip: stm32: select GENERIC_IRQ_CHIP
ÂÂ irqchip: stm32: add multi-bank management
ÂÂ dt-bindings: interrupt-controllers: add compatible string for stm32h7
ÂÂ irqchip: stm32: add stm32h7 support
ÂÂ irqchip: stm32: fix initial values
ÂÂ irqchip: stm32: move the wakeup on interrupt mask
ÂÂ ARM: dts: stm32: add exti support for stm32h743
ÂÂ ARM: dts: stm32: add system config bank node for stm32h743
ÂÂ ARM: dts: stm32: add support of exti on stm32h743 pinctrl
 .../interrupt-controller/st,stm32-exti.txt | 4 +-
 arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 +++
 arch/arm/boot/dts/stm32h743.dtsi | 13 ++
 drivers/irqchip/Kconfig | 1 +
 drivers/irqchip/irq-stm32-exti.c | 206 ++++++++++++++++-----
 5 files changed, 198 insertions(+), 50 deletions(-)
I'm happy to take the first 6 patches through the irqchip tree. How
about the last 3? I'd rather see them routed via armsoc if there is any
risk of merge conflicts.
How do you want to proceed?
Thanks,
ÂÂÂÂM.