[PATCH v3 resend 1/1] Input: add support for HiDeep touchscreen
From: Anthony Kim
Date: Tue Nov 07 2017 - 20:38:36 EST
The HiDeep touchscreen device is a capacitive multi-touch controller
mainly for multi-touch supported devices use. It use I2C interface for
communication to IC and provide axis X, Y, Z locations for ten finger
touch through input event interface to userspace.
It support the Crimson and the Lime two type IC. They are different
the number of channel supported and FW size. But the working protocol
is same.
Signed-off-by: Anthony Kim <anthony.kim@xxxxxxxxxx>
---
.../bindings/input/touchscreen/hideep.txt | 42 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
Acked-by: Rob Herring <robh+dt@xxxxxxxxxx>
drivers/input/touchscreen/Kconfig | 11 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/hideep.c | 1120 ++++++++++++++++++++
5 files changed, 1175 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hideep.txt
create mode 100644 drivers/input/touchscreen/hideep.c
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
new file mode 100644
index 0000000..121d9b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -0,0 +1,42 @@
+* HiDeep Finger and Stylus touchscreen controller
+
+Required properties:
+- compatible : must be "hideep,hideep-ts"
+- reg : I2C slave address, (e.g. 0x6C).
+- interrupt-parent : Interrupt controller to which the chip is connected.
+- interrupts : Interrupt to which the chip is connected.
+
+Optional properties:
+- vdd-supply : It is the controller supply for controlling
+ main voltage(3.3V) through the regulator.
+- vid-supply : It is the controller supply for controlling
+ IO voltage(1.8V) through the regulator.
+- reset-gpios : Define for reset gpio pin.
+ It is to use for reset IC.
+- touchscreen-size-x : X axis size of touchscreen
+- touchscreen-size-y : Y axis size of touchscreen
+- linux,keycodes : Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 3 entries.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+i2c@00000000 {
+
+ /* ... */
+
+ touchscreen@6c {
+ compatible = "hideep,hideep-ts";
+ reg = <0x6c>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&ldo15_reg>";
+ vid-supply = <&ldo18_reg>;
+ reset-gpios = <&gpx1 5 0>;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1afd298..138895e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -137,6 +137,7 @@ gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
hardkernel Hardkernel Co., Ltd
+hideep HiDeep Inc.
himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 26a66bc..dbe33fc3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -354,6 +354,17 @@ config TOUCHSCREEN_GOODIX
To compile this driver as a module, choose M here: the
module will be called goodix.
+config TOUCHSCREEN_HIDEEP
+ tristate "HiDeep Touch IC"
+ depends on I2C
+ help
+ Say Y here if you have a touchscreen using HiDeep.
+
+ If unsure, say N.
+
+ To compile this driver as a moudle, choose M here : the
+ module will be called hideep_ts.
+
config TOUCHSCREEN_ILI210X
tristate "Ilitek ILI210X based touchscreen"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index a129df6..414cb3f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
+obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
diff --git a/drivers/input/touchscreen/hideep.c b/drivers/input/touchscreen/hideep.c
new file mode 100644
index 0000000..a72b56f
--- /dev/null
+++ b/drivers/input/touchscreen/hideep.c
@@ -0,0 +1,1120 @@
+/*
+ * Copyright (C) 2012-2017 Hideep, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foudation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/regulator/consumer.h>
+#include <asm/unaligned.h>
+
+#define HIDEEP_TS_NAME "HiDeep Touchscreen"
+#define HIDEEP_I2C_NAME "hideep_ts"
+
+#define HIDEEP_MT_MAX 10
+#define HIDEEP_KEY_MAX 3
+
+/* count(2) + touch data(100) + key data(6) */
+#define HIDEEP_MAX_EVENT 108UL
+
+#define HIDEEP_TOUCH_EVENT_INDEX 2
+#define HIDEEP_KEY_EVENT_INDEX 102
+
+/* Touch & key event */
+#define HIDEEP_EVENT_ADDR 0x240
+
+/* command list */
+#define HIDEEP_RESET_CMD 0x9800
+
+/* event bit */
+#define HIDEEP_MT_RELEASED BIT(4)
+#define HIDEEP_KEY_PRESSED BIT(7)
+#define HIDEEP_KEY_FIRST_PRESSED BIT(8)
+#define HIDEEP_KEY_PRESSED_MASK (HIDEEP_KEY_PRESSED | \
+ HIDEEP_KEY_FIRST_PRESSED)
+
+#define HIDEEP_KEY_IDX_MASK 0x0f
+
+/* For NVM */
+#define HIDEEP_YRAM_BASE 0x40000000
+#define HIDEEP_PERIPHERAL_BASE 0x50000000
+#define HIDEEP_ESI_BASE (HIDEEP_PERIPHERAL_BASE + 0x00000000)
+#define HIDEEP_FLASH_BASE (HIDEEP_PERIPHERAL_BASE + 0x01000000)
+#define HIDEEP_SYSCON_BASE (HIDEEP_PERIPHERAL_BASE + 0x02000000)
+
+#define HIDEEP_SYSCON_MOD_CON (HIDEEP_SYSCON_BASE + 0x0000)
+#define HIDEEP_SYSCON_SPC_CON (HIDEEP_SYSCON_BASE + 0x0004)
+#define HIDEEP_SYSCON_CLK_CON (HIDEEP_SYSCON_BASE + 0x0008)
+#define HIDEEP_SYSCON_CLK_ENA (HIDEEP_SYSCON_BASE + 0x000C)
+#define HIDEEP_SYSCON_RST_CON (HIDEEP_SYSCON_BASE + 0x0010)
+#define HIDEEP_SYSCON_WDT_CON (HIDEEP_SYSCON_BASE + 0x0014)
+#define HIDEEP_SYSCON_WDT_CNT (HIDEEP_SYSCON_BASE + 0x0018)
+#define HIDEEP_SYSCON_PWR_CON (HIDEEP_SYSCON_BASE + 0x0020)
+#define HIDEEP_SYSCON_PGM_ID (HIDEEP_SYSCON_BASE + 0x00F4)
+
+#define HIDEEP_FLASH_CON (HIDEEP_FLASH_BASE + 0x0000)
+#define HIDEEP_FLASH_STA (HIDEEP_FLASH_BASE + 0x0004)
+#define HIDEEP_FLASH_CFG (HIDEEP_FLASH_BASE + 0x0008)
+#define HIDEEP_FLASH_TIM (HIDEEP_FLASH_BASE + 0x000C)
+#define HIDEEP_FLASH_CACHE_CFG (HIDEEP_FLASH_BASE + 0x0010)
+#define HIDEEP_FLASH_PIO_SIG (HIDEEP_FLASH_BASE + 0x400000)
+
+#define HIDEEP_ESI_TX_INVALID (HIDEEP_ESI_BASE + 0x0008)
+
+#define HIDEEP_PERASE 0x00040000
+#define HIDEEP_WRONLY 0x00100000
+
+#define HIDEEP_NVM_MASK_OFS 0x0000000C
+#define HIDEEP_NVM_DEFAULT_PAGE 0
+#define HIDEEP_NVM_SFR_WPAGE 1
+#define HIDEEP_NVM_SFR_RPAGE 2
+
+#define HIDEEP_PIO_SIG 0x00400000
+#define HIDEEP_PROT_MODE 0x03400000
+
+#define HIDEEP_NVM_PAGE_SIZE 128UL
+
+#define HIDEEP_DWZ_INFO 0x000002C0
+
+struct hideep_event {
+ __le16 x;
+ __le16 y;
+ __le16 z;
+ u8 w;
+ u8 flag;
+ u8 type;
+ u8 index;
+};
+
+struct dwz_info {
+ __be32 code_start;
+ u8 code_crc[12];
+
+ __be32 c_code_start;
+ __be16 gen_ver;
+ __be16 c_code_len;
+
+ __be32 vr_start;
+ __be16 rsv0;
+ __be16 vr_len;
+
+ __be32 ft_start;
+ __be16 vr_version;
+ __be16 ft_len;
+
+ __be16 core_ver;
+ __be16 boot_ver;
+
+ __be16 release_ver;
+ __be16 custom_ver;
+
+ u8 panel_type;
+ u8 factory_id;
+ u8 model_name[6];
+
+ __be16 extra_option;
+ __be16 product_code;
+
+ __be16 vendor_id;
+ __be16 product_id;
+};
+
+struct pgm_packet {
+ struct {
+ u8 unused[3];
+ u8 len;
+ __be32 addr;
+ } header;
+ __be32 payload[HIDEEP_NVM_PAGE_SIZE / sizeof(__be32)];
+};
+
+#define HIDEEP_XFER_BUF_SIZE sizeof(struct pgm_packet)
+
+struct hideep_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct regmap *reg;
+
+ struct touchscreen_properties prop;
+
+ struct gpio_desc *reset_gpio;
+
+ struct regulator *vcc_vdd;
+ struct regulator *vcc_vid;
+
+ struct mutex dev_mutex;
+
+ u32 tch_count;
+ u32 lpm_count;
+
+ /*
+ * Data buffer to read packet from the device (contacts and key
+ * states). We align it on double-word boundary to keep word-sized
+ * fields in contact data and double-word-sized fields in program
+ * packet aligned.
+ */
+ u8 xfer_buf[HIDEEP_XFER_BUF_SIZE] __aligned(4);
+
+ int key_num;
+ u32 key_codes[HIDEEP_KEY_MAX];
+
+ struct dwz_info dwz_info;
+
+ unsigned int fw_size;
+ u32 nvm_mask;
+};
+
+static int hideep_pgm_w_mem(struct hideep_ts *ts, u32 addr,
+ const __be32 *data, size_t count)
+{
+ struct pgm_packet *packet = (void *)ts->xfer_buf;
+ size_t len = count * sizeof(*data);
+ struct i2c_msg msg = {
+ .addr = ts->client->addr,
+ .len = len + sizeof(packet->header.len) +
+ sizeof(packet->header.addr),
+ .buf = &packet->header.len,
+ };
+ int ret;
+
+ if (len > HIDEEP_NVM_PAGE_SIZE)
+ return -EINVAL;
+
+ packet->header.len = 0x80 | (count - 1);
+ packet->header.addr = cpu_to_be32(addr);
+ memcpy(packet->payload, data, len);
+
+ ret = i2c_transfer(ts->client->adapter, &msg, 1);
+ if (ret != 1)
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static int hideep_pgm_r_mem(struct hideep_ts *ts, u32 addr,
+ __be32 *data, size_t count)
+{
+ struct pgm_packet *packet = (void *)ts->xfer_buf;
+ size_t len = count * sizeof(*data);
+ struct i2c_msg msg[] = {
+ {
+ .addr = ts->client->addr,
+ .len = sizeof(packet->header.len) +
+ sizeof(packet->header.addr),
+ .buf = &packet->header.len,
+ },
+ {
+ .addr = ts->client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = (u8 *)data,
+ },
+ };
+ int ret;
+
+ if (len > HIDEEP_NVM_PAGE_SIZE)
+ return -EINVAL;
+
+ packet->header.len = count - 1;
+ packet->header.addr = cpu_to_be32(addr);
+
+ ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret != ARRAY_SIZE(msg))
+ return ret < 0 ? ret : -EIO;
+
+ return 0;
+}
+
+static int hideep_pgm_r_reg(struct hideep_ts *ts, u32 addr, u32 *val)
+{
+ __be32 data;
+ int error;
+
+ error = hideep_pgm_r_mem(ts, addr, &data, 1);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "read of register %#08x failed: %d\n",
+ addr, error);
+ return error;
+ }
+
+ *val = be32_to_cpu(data);
+ return 0;
+}
+
+static int hideep_pgm_w_reg(struct hideep_ts *ts, u32 addr, u32 val)
+{
+ __be32 data = cpu_to_be32(val);
+ int error;
+
+ error = hideep_pgm_w_mem(ts, addr, &data, 1);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "write to register %#08x (%#08x) failed: %d\n",
+ addr, val, error);
+ return error;
+ }
+
+ return 0;
+}
+
+#define SW_RESET_IN_PGM(clk) \
+{ \
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CNT, (clk)); \
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x03); \
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x01); \
+}
+
+#define SET_FLASH_PIO(ce) \
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CON, \
+ 0x01 | ((ce) << 1))
+
+#define SET_PIO_SIG(x, y) \
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_PIO_SIG + (x), (y))
+
+#define SET_FLASH_HWCONTROL() \
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CON, 0x00)
+
+#define NVM_W_SFR(x, y) \
+{ \
+ SET_FLASH_PIO(1); \
+ SET_PIO_SIG(x, y); \
+ SET_FLASH_PIO(0); \
+}
+
+static void hideep_pgm_set(struct hideep_ts *ts)
+{
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_WDT_CON, 0x00);
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_SPC_CON, 0x00);
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_CLK_ENA, 0xFF);
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_CLK_CON, 0x01);
+ hideep_pgm_w_reg(ts, HIDEEP_SYSCON_PWR_CON, 0x01);
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_TIM, 0x03);
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CACHE_CFG, 0x00);
+}
+
+static int hideep_pgm_get_pattern(struct hideep_ts *ts, u32 *pattern)
+{
+ u16 p1 = 0xAF39;
+ u16 p2 = 0xDF9D;
+ int error;
+
+ error = regmap_bulk_write(ts->reg, p1, &p2, 1);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "%s: regmap_bulk_write() failed with %d\n",
+ __func__, error);
+ return error;
+ }
+
+ usleep_range(1000, 1100);
+
+ /* flush invalid Tx load register */
+ error = hideep_pgm_w_reg(ts, HIDEEP_ESI_TX_INVALID, 0x01);
+ if (error)
+ return error;
+
+ error = hideep_pgm_r_reg(ts, HIDEEP_SYSCON_PGM_ID, pattern);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int hideep_enter_pgm(struct hideep_ts *ts)
+{
+ int retry_count = 10;
+ u32 pattern;
+ int error;
+
+ while (retry_count--) {
+ error = hideep_pgm_get_pattern(ts, &pattern);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "hideep_pgm_get_pattern failed: %d\n", error);
+ } else if (pattern != 0x39AF9DDF) {
+ dev_err(&ts->client->dev, "%s: bad pattern: %#08x\n",
+ __func__, pattern);
+ } else {
+ dev_dbg(&ts->client->dev, "found magic code");
+
+ hideep_pgm_set(ts);
+ usleep_range(1000, 1100);
+
+ return 0;
+ }
+ }
+
+ dev_err(&ts->client->dev, "failed to enter pgm mode\n");
+ SW_RESET_IN_PGM(1000);
+ return -EIO;
+}
+
+static void hideep_nvm_unlock(struct hideep_ts *ts)
+{
+ u32 unmask_code;
+
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_SFR_RPAGE);
+ hideep_pgm_r_reg(ts, 0x0000000C, &unmask_code);
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_DEFAULT_PAGE);
+
+ /* make it unprotected code */
+ unmask_code &= ~HIDEEP_PROT_MODE;
+
+ /* compare unmask code */
+ if (unmask_code != ts->nvm_mask)
+ dev_warn(&ts->client->dev,
+ "read mask code different %#08x vs %#08x",
+ unmask_code, ts->nvm_mask);
+
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_SFR_WPAGE);
+ SET_FLASH_PIO(0);
+
+ NVM_W_SFR(HIDEEP_NVM_MASK_OFS, ts->nvm_mask);
+ SET_FLASH_HWCONTROL();
+ hideep_pgm_w_reg(ts, HIDEEP_FLASH_CFG, HIDEEP_NVM_DEFAULT_PAGE);
+}
+
+static int hideep_check_status(struct hideep_ts *ts)
+{
+ int time_out = 100;
+ int status;
+ int error;
+
+ while (time_out--) {
+ error = hideep_pgm_r_reg(ts, HIDEEP_FLASH_STA, &status);
+ if (!error && status)
+ return 0;
+
+ usleep_range(1000, 1100);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int hideep_program_page(struct hideep_ts *ts, u32 addr,
+ const __be32 *ucode, size_t xfer_count)
+{
+ u32 val;
+ int error;
+
+ error = hideep_check_status(ts);
+ if (error)
+ return -EBUSY;
+
+ addr &= ~(HIDEEP_NVM_PAGE_SIZE - 1);
+
+ SET_FLASH_PIO(0);
+ SET_FLASH_PIO(1);
+
+ /* erase page */
+ SET_PIO_SIG(HIDEEP_PERASE | addr, 0xFFFFFFFF);
+
+ SET_FLASH_PIO(0);
+
+ error = hideep_check_status(ts);
+ if (error)
+ return -EBUSY;
+
+ /* write page */
+ SET_FLASH_PIO(1);
+
+ val = be32_to_cpu(ucode[0]);
+ SET_PIO_SIG(HIDEEP_WRONLY | addr, val);
+
+ hideep_pgm_w_mem(ts, HIDEEP_FLASH_PIO_SIG | HIDEEP_WRONLY,
+ ucode, xfer_count);
+
+ val = be32_to_cpu(ucode[xfer_count - 1]);
+ SET_PIO_SIG(124, val);
+
+ SET_FLASH_PIO(0);
+
+ usleep_range(1000, 1100);
+
+ error = hideep_check_status(ts);
+ if (error)
+ return -EBUSY;
+
+ SET_FLASH_HWCONTROL();
+
+ return 0;
+}
+
+static int hideep_program_nvm(struct hideep_ts *ts,
+ const __be32 *ucode, size_t ucode_len)
+{
+ struct pgm_packet *packet_r = (void *)ts->xfer_buf;
+ __be32 *current_ucode = packet_r->payload;
+ size_t xfer_len;
+ size_t xfer_count;
+ u32 addr = 0;
+ int error;
+
+ hideep_nvm_unlock(ts);
+
+ while (ucode_len > 0) {
+ xfer_len = min(ucode_len, HIDEEP_NVM_PAGE_SIZE);
+ xfer_count = xfer_len / sizeof(*ucode);
+
+ error = hideep_pgm_r_mem(ts, 0x00000000 + addr,
+ current_ucode, xfer_count);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "%s: failed to read page at offset %#08x: %d\n",
+ __func__, addr, error);
+ return error;
+ }
+
+ /* See if the page needs updating */
+ if (memcmp(ucode, current_ucode, xfer_len)) {
+ error = hideep_program_page(ts, addr,
+ ucode, xfer_count);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "%s: iwrite failure @%#08x: %d\n",
+ __func__, addr, error);
+ return error;
+ }
+
+ usleep_range(1000, 1100);
+ }
+
+ ucode += xfer_count;
+ addr += xfer_len;
+ ucode_len -= xfer_len;
+ }
+
+ return 0;
+}
+
+static int hideep_verify_nvm(struct hideep_ts *ts,
+ const __be32 *ucode, size_t ucode_len)
+{
+ struct pgm_packet *packet_r = (void *)ts->xfer_buf;
+ __be32 *current_ucode = packet_r->payload;
+ size_t xfer_len;
+ size_t xfer_count;
+ u32 addr = 0;
+ int i;
+ int error;
+
+ while (ucode_len > 0) {
+ xfer_len = min(ucode_len, HIDEEP_NVM_PAGE_SIZE);
+ xfer_count = xfer_len / sizeof(*ucode);
+
+ error = hideep_pgm_r_mem(ts, 0x00000000 + addr,
+ current_ucode, xfer_count);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "%s: failed to read page at offset %#08x: %d\n",
+ __func__, addr, error);
+ return error;
+ }
+
+ if (memcmp(ucode, current_ucode, xfer_len)) {
+ const u8 *ucode_bytes = (const u8 *)ucode;
+ const u8 *current_bytes = (const u8 *)current_ucode;
+
+ for (i = 0; i < xfer_len; i++)
+ if (ucode_bytes[i] != current_bytes[i])
+ dev_err(&ts->client->dev,
+ "%s: mismatch @%#08x: (%#02x vs %#02x)\n",
+ __func__, addr + i,
+ ucode_bytes[i],
+ current_bytes[i]);
+
+ return -EIO;
+ }
+
+ ucode += xfer_count;
+ addr += xfer_len;
+ ucode_len -= xfer_len;
+ }
+
+ return 0;
+}
+
+static int hideep_load_dwz(struct hideep_ts *ts)
+{
+ u16 product_code;
+ int error;
+
+ error = hideep_enter_pgm(ts);
+ if (error)
+ return error;
+
+ msleep(50);
+
+ error = hideep_pgm_r_mem(ts, HIDEEP_DWZ_INFO,
+ (void *)&ts->dwz_info,
+ sizeof(ts->dwz_info) / sizeof(__be32));
+
+ SW_RESET_IN_PGM(10);
+ msleep(50);
+
+ if (error) {
+ dev_err(&ts->client->dev,
+ "failed to fetch DWZ data: %d\n", error);
+ return error;
+ }
+
+ product_code = be16_to_cpu(ts->dwz_info.product_code);
+
+ switch (product_code & 0xF0) {
+ case 0x40:
+ dev_dbg(&ts->client->dev, "used crimson IC");
+ ts->fw_size = 1024 * 48;
+ ts->nvm_mask = 0x00310000;
+ break;
+ case 0x60:
+ dev_dbg(&ts->client->dev, "used lime IC");
+ ts->fw_size = 1024 * 64;
+ ts->nvm_mask = 0x0030027B;
+ break;
+ default:
+ dev_err(&ts->client->dev, "product code is wrong: %#04x",
+ product_code);
+ return -EINVAL;
+ }
+
+ dev_dbg(&ts->client->dev, "firmware release version: %#04x",
+ be16_to_cpu(ts->dwz_info.release_ver));
+
+ return 0;
+}
+
+static int hideep_flash_firmware(struct hideep_ts *ts,
+ const __be32 *ucode, size_t ucode_len)
+{
+ int retry_cnt = 3;
+ int error;
+
+ while (retry_cnt--) {
+ error = hideep_program_nvm(ts, ucode, ucode_len);
+ if (!error) {
+ error = hideep_verify_nvm(ts, ucode, ucode_len);
+ if (!error)
+ return 0;
+ }
+ }
+
+ return error;
+}
+
+static int hideep_update_firmware(struct hideep_ts *ts,
+ const __be32 *ucode, size_t ucode_len)
+{
+ int error, error2;
+
+ dev_dbg(&ts->client->dev, "starting firmware update");
+
+ /* enter program mode */
+ error = hideep_enter_pgm(ts);
+ if (error)
+ return error;
+
+ error = hideep_flash_firmware(ts, ucode, ucode_len);
+ if (error)
+ dev_err(&ts->client->dev,
+ "firmware update failed: %d\n", error);
+ else
+ dev_dbg(&ts->client->dev, "firmware updated successfully\n");
+
+ SW_RESET_IN_PGM(1000);
+
+ error2 = hideep_load_dwz(ts);
+ if (error2)
+ dev_err(&ts->client->dev,
+ "failed to load dwz after firmware update: %d\n",
+ error2);
+
+ return error ?: error2;
+}
+
+static int hideep_power_on(struct hideep_ts *ts)
+{
+ int error = 0;
+
+ error = regulator_enable(ts->vcc_vdd);
+ if (error)
+ dev_err(&ts->client->dev,
+ "failed to enable 'vdd' regulator: %d", error);
+
+ usleep_range(999, 1000);
+
+ error = regulator_enable(ts->vcc_vid);
+ if (error)
+ dev_err(&ts->client->dev,
+ "failed to enable 'vcc_vid' regulator: %d",
+ error);
+
+ msleep(30);
+
+ if (ts->reset_gpio) {
+ gpiod_set_value_cansleep(ts->reset_gpio, 0);
+ } else {
+ error = regmap_write(ts->reg, HIDEEP_RESET_CMD, 0x01);
+ if (error)
+ dev_err(&ts->client->dev,
+ "failed to send 'reset' command: %d\n", error);
+ }
+
+ msleep(50);
+
+ return error;
+}
+
+static void hideep_power_off(void *data)
+{
+ struct hideep_ts *ts = data;
+
+ if (ts->reset_gpio)
+ gpiod_set_value(ts->reset_gpio, 1);
+
+ regulator_disable(ts->vcc_vid);
+ regulator_disable(ts->vcc_vdd);
+}
+
+#define __GET_MT_TOOL_TYPE(type) ((type) == 0x01 ? MT_TOOL_FINGER : MT_TOOL_PEN)
+
+static void hideep_report_slot(struct input_dev *input,
+ const struct hideep_event *event)
+{
+ input_mt_slot(input, event->index & 0x0f);
+ input_mt_report_slot_state(input,
+ __GET_MT_TOOL_TYPE(event->type),
+ !(event->flag & HIDEEP_MT_RELEASED));
+ if (!(event->flag & HIDEEP_MT_RELEASED)) {
+ input_report_abs(input, ABS_MT_POSITION_X,
+ le16_to_cpup(&event->x));
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ le16_to_cpup(&event->y));
+ input_report_abs(input, ABS_MT_PRESSURE,
+ le16_to_cpup(&event->z));
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, event->w);
+ }
+}
+
+static void hideep_parse_and_report(struct hideep_ts *ts)
+{
+ const struct hideep_event *events =
+ (void *)&ts->xfer_buf[HIDEEP_TOUCH_EVENT_INDEX];
+ const u8 *keys = &ts->xfer_buf[HIDEEP_KEY_EVENT_INDEX];
+ int touch_count = ts->xfer_buf[0];
+ int key_count = ts->xfer_buf[1] & 0x0f;
+ int lpm_count = ts->xfer_buf[1] & 0xf0;
+ int i;
+
+ /* get touch event count */
+ dev_dbg(&ts->client->dev, "mt = %d, key = %d, lpm = %02x",
+ touch_count, key_count, lpm_count);
+
+ touch_count = min(touch_count, HIDEEP_MT_MAX);
+ for (i = 0; i < touch_count; i++)
+ hideep_report_slot(ts->input_dev, events + i);
+
+ key_count = min(key_count, HIDEEP_KEY_MAX);
+ for (i = 0; i < key_count; i++) {
+ u8 key_data = keys[i * 2];
+
+ input_report_key(ts->input_dev,
+ ts->key_codes[key_data & HIDEEP_KEY_IDX_MASK],
+ key_data & HIDEEP_KEY_PRESSED_MASK);
+ }
+
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+}
+
+static irqreturn_t hideep_irq(int irq, void *handle)
+{
+ struct hideep_ts *ts = handle;
+ int error;
+
+ BUILD_BUG_ON(HIDEEP_MAX_EVENT > HIDEEP_XFER_BUF_SIZE);
+
+ error = regmap_bulk_read(ts->reg, HIDEEP_EVENT_ADDR,
+ ts->xfer_buf, HIDEEP_MAX_EVENT / 2);
+ if (error) {
+ dev_err(&ts->client->dev, "failed to read events: %d\n", error);
+ goto out;
+ }
+
+ hideep_parse_and_report(ts);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int hideep_get_axis_info(struct hideep_ts *ts)
+{
+ __le16 val[2];
+ int error;
+
+ error = regmap_bulk_read(ts->reg, 0x28, val, ARRAY_SIZE(val));
+ if (error)
+ return error;
+
+ ts->prop.max_x = le16_to_cpup(val);
+ ts->prop.max_y = le16_to_cpup(val + 1);
+
+ dev_dbg(&ts->client->dev, "X: %d, Y: %d",
+ ts->prop.max_x, ts->prop.max_y);
+
+ return 0;
+}
+
+static int hideep_init_input(struct hideep_ts *ts)
+{
+ struct device *dev = &ts->client->dev;
+ int i;
+ int error;
+
+ ts->input_dev = devm_input_allocate_device(dev);
+ if (!ts->input_dev) {
+ dev_err(dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ ts->input_dev->name = HIDEEP_TS_NAME;
+ ts->input_dev->id.bustype = BUS_I2C;
+ input_set_drvdata(ts->input_dev, ts);
+
+ input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(ts->input_dev, ABS_MT_PRESSURE, 0, 65535, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_MAX, 0, 0);
+ touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
+
+ if (ts->prop.max_x == 0 || ts->prop.max_y == 0) {
+ error = hideep_get_axis_info(ts);
+ if (error)
+ return error;
+ }
+
+ error = input_mt_init_slots(ts->input_dev, HIDEEP_MT_MAX,
+ INPUT_MT_DIRECT);
+ if (error)
+ return error;
+
+ ts->key_num = device_property_read_u32_array(dev, "linux,keycodes",
+ NULL, 0);
+ if (ts->key_num > HIDEEP_KEY_MAX) {
+ dev_err(dev, "too many keys defined: %d\n",
+ ts->key_num);
+ return -EINVAL;
+ }
+
+ if (ts->key_num <= 0) {
+ dev_dbg(dev,
+ "missing or malformed 'linux,keycodes' property\n");
+ } else {
+ error = device_property_read_u32_array(dev, "linux,keycodes",
+ ts->key_codes,
+ ts->key_num);
+ if (error) {
+ dev_dbg(dev, "failed to read keymap: %d", error);
+ return error;
+ }
+
+ if (ts->key_num) {
+ ts->input_dev->keycode = ts->key_codes;
+ ts->input_dev->keycodesize = sizeof(ts->key_codes[0]);
+ ts->input_dev->keycodemax = ts->key_num;
+
+ for (i = 0; i < ts->key_num; i++)
+ input_set_capability(ts->input_dev, EV_KEY,
+ ts->key_codes[i]);
+ }
+ }
+
+ error = input_register_device(ts->input_dev);
+ if (error) {
+ dev_err(dev, "failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static ssize_t hideep_update_fw(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hideep_ts *ts = i2c_get_clientdata(client);
+ const struct firmware *fw_entry;
+ char *fw_name;
+ int mode;
+ int error;
+
+ error = kstrtoint(buf, 0, &mode);
+ if (error)
+ return error;
+
+ fw_name = kasprintf(GFP_KERNEL, "hideep_ts_%04x.bin",
+ be16_to_cpu(ts->dwz_info.product_id));
+ if (!fw_name)
+ return -ENOMEM;
+
+ error = request_firmware(&fw_entry, fw_name, dev);
+ if (error) {
+ dev_err(dev, "failed to request firmware %s: %d",
+ fw_name, error);
+ goto out_free_fw_name;
+ }
+
+ if (fw_entry->size % sizeof(__be32)) {
+ dev_err(dev, "invalid firmware size %zu\n", fw_entry->size);
+ error = -EINVAL;
+ goto out_release_fw;
+ }
+
+ if (fw_entry->size > ts->fw_size) {
+ dev_err(dev, "fw size (%zu) is too big (memory size %d)\n",
+ fw_entry->size, ts->fw_size);
+ error = -EFBIG;
+ goto out_release_fw;
+ }
+
+ mutex_lock(&ts->dev_mutex);
+ disable_irq(client->irq);
+
+ error = hideep_update_firmware(ts, (const __be32 *)fw_entry->data,
+ fw_entry->size);
+
+ enable_irq(client->irq);
+ mutex_unlock(&ts->dev_mutex);
+
+out_release_fw:
+ release_firmware(fw_entry);
+out_free_fw_name:
+ kfree(fw_name);
+
+ return error ?: count;
+}
+
+static ssize_t hideep_fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hideep_ts *ts = i2c_get_clientdata(client);
+ ssize_t len;
+
+ mutex_lock(&ts->dev_mutex);
+ len = scnprintf(buf, PAGE_SIZE, "%04x\n",
+ be16_to_cpu(ts->dwz_info.release_ver));
+ mutex_unlock(&ts->dev_mutex);
+
+ return len;
+}
+
+static ssize_t hideep_product_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hideep_ts *ts = i2c_get_clientdata(client);
+ ssize_t len;
+
+ mutex_lock(&ts->dev_mutex);
+ len = scnprintf(buf, PAGE_SIZE, "%04x\n",
+ be16_to_cpu(ts->dwz_info.product_id));
+ mutex_unlock(&ts->dev_mutex);
+
+ return len;
+}
+
+static DEVICE_ATTR(version, 0664, hideep_fw_version_show, NULL);
+static DEVICE_ATTR(product_id, 0664, hideep_product_id_show, NULL);
+static DEVICE_ATTR(update_fw, 0664, NULL, hideep_update_fw);
+
+static struct attribute *hideep_ts_sysfs_entries[] = {
+ &dev_attr_version.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_update_fw.attr,
+ NULL,
+};
+
+static const struct attribute_group hideep_ts_attr_group = {
+ .attrs = hideep_ts_sysfs_entries,
+};
+
+static int __maybe_unused hideep_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hideep_ts *ts = i2c_get_clientdata(client);
+
+ disable_irq(client->irq);
+ hideep_power_off(ts);
+
+ return 0;
+}
+
+static int __maybe_unused hideep_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct hideep_ts *ts = i2c_get_clientdata(client);
+ int error;
+
+ error = hideep_power_on(ts);
+ if (error) {
+ dev_err(&client->dev, "power on failed");
+ return error;
+ }
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(hideep_pm_ops, hideep_suspend, hideep_resume);
+
+static const struct regmap_config hideep_regmap_config = {
+ .reg_bits = 16,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .max_register = 0xffff,
+};
+
+static int hideep_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct hideep_ts *ts;
+ int error;
+
+ /* check i2c bus */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "check i2c device error");
+ return -ENODEV;
+ }
+
+ if (client->irq <= 0) {
+ dev_err(&client->dev, "missing irq: %d\n", client->irq);
+ return -EINVAL;
+ }
+
+ ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ mutex_init(&ts->dev_mutex);
+
+ ts->reg = devm_regmap_init_i2c(client, &hideep_regmap_config);
+ if (IS_ERR(ts->reg)) {
+ error = PTR_ERR(ts->reg);
+ dev_err(&client->dev,
+ "failed to initialize regmap: %d\n", error);
+ return error;
+ }
+
+ ts->vcc_vdd = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(ts->vcc_vdd))
+ return PTR_ERR(ts->vcc_vdd);
+
+ ts->vcc_vid = devm_regulator_get(&client->dev, "vid");
+ if (IS_ERR(ts->vcc_vid))
+ return PTR_ERR(ts->vcc_vid);
+
+ ts->reset_gpio = devm_gpiod_get_optional(&client->dev,
+ "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ts->reset_gpio))
+ return PTR_ERR(ts->reset_gpio);
+
+ error = hideep_power_on(ts);
+ if (error) {
+ dev_err(&client->dev, "power on failed: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev, hideep_power_off, ts);
+ if (error)
+ return error;
+
+ error = hideep_load_dwz(ts);
+ if (error) {
+ dev_err(&client->dev, "failed to load dwz: %d", error);
+ return error;
+ }
+
+ error = hideep_init_input(ts);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, hideep_irq, IRQF_ONESHOT,
+ client->name, ts);
+ if (error) {
+ dev_err(&client->dev, "failed to request irq %d: %d\n",
+ client->irq, error);
+ return error;
+ }
+
+ error = devm_device_add_group(&client->dev, &hideep_ts_attr_group);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to add sysfs attributes: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id hideep_i2c_id[] = {
+ { HIDEEP_I2C_NAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, hideep_i2c_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id hideep_acpi_id[] = {
+ { "HIDP0001", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, hideep_acpi_id);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id hideep_match_table[] = {
+ { .compatible = "hideep,hideep-ts" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, hideep_match_table);
+#endif
+
+static struct i2c_driver hideep_driver = {
+ .driver = {
+ .name = HIDEEP_I2C_NAME,
+ .of_match_table = of_match_ptr(hideep_match_table),
+ .acpi_match_table = ACPI_PTR(hideep_acpi_id),
+ .pm = &hideep_pm_ops,
+ },
+ .id_table = hideep_i2c_id,
+ .probe = hideep_probe,
+};
+
+module_i2c_driver(hideep_driver);
+
+MODULE_DESCRIPTION("Driver for HiDeep Touchscreen Controller");
+MODULE_AUTHOR("anthony.kim@xxxxxxxxxx");
+MODULE_LICENSE("GPL v2");
--
2.7.4