[PATCH v2 0/3] Add driver for Broadcom Cygnus USB phy controller

[Raveendra Padasalagi]

Add driver for Broadcom's USB phy controller's used in Cygnus family
of SoC and it's based on 4.14-rc3 tag.

The patch set can be fetched from iproc-cyg-usb-v2 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v1:
  - Added "dt-bindings: phy:" subject prefix in dt bindings patch
  - Renamed phy node name from "phy" to "usb-phy"
  - Added BIT() macro definitions for some of the register bit access
  - Added .owner in phy_ops structure.
  - Added cygnus_phy_shutdown_all() to keep probe() clean.
  - Used devm_extcon_register_notifier() instead of extcon_register_notifier()

Raveendra Padasalagi (3):
  dt-bindings: phy: Add Cygnus usb phy binding
  drivers: phy: broadcom: Add driver for Cygnus USB phy controller
  ARM: dts: Add dt node for Broadcom Cygnus USB phy

 .../bindings/phy/brcm,cygnus-usb-phy.txt           | 106 ++++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |  35 ++
 drivers/phy/broadcom/Kconfig                       |  14 +
 drivers/phy/broadcom/Makefile                      |   1 +
 drivers/phy/broadcom/phy-bcm-cygnus-usb.c          | 690 +++++++++++++++++++++
 5 files changed, 846 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
 create mode 100644 drivers/phy/broadcom/phy-bcm-cygnus-usb.c

-- 
1.9.1