Re: [alsa-devel] [PATCH 1/1] ALSA: usb: initial USB Audio Device Class 3.0 support
From: Pierre-Louis Bossart
Date: Wed Nov 08 2017 - 14:39:04 EST
Nice work, thanks! I double-checked all the descriptors and values and
didn't find anything problematic, the main comment I have is that the
clock source/selection could probably be refactored since the
differences are really minor with UAC2, and there is work to do to
select the right Audio Interface Association.
On 11/6/17 8:01 PM, Ruslan Bilovol wrote:
Recently released USB Audio Class 3.0 specification
introduces many significant changes comparing to
previous versions, like
- new Power Domains, support for LPM/L1
- new Cluster descriptor
- changed layout of all class-specific descriptors
- new High Capability descriptors
- New class-specific String descriptors
- new and removed units
- additional sources for interrupts
- removed Type II Audio Data Formats
- ... and many other things (check spec)
It also provides backward compatibility through
multiple configurations, as well as requires
mandatory support for BADD (Basic Audio Device
Definition) on each ADC3.0 compliant device
This patch adds initial support of UAC3 specification
that is enough for Generic I/O Profile (BAOF, BAIF)
device support from BADD document.
Do you mean to say that the selection of the BADD profile or full-blown
descriptor capabilities will be handled in a follow-up patch?
It's my understanding from Section 3.3 that a UAC3 device is required to
expose
- a backwards-compatible configuration (UAC1 or UAC2),
- a UAC3 BADD profile
- one or more AIA compliant with UAC3 (which may have additional
features not present in the baseline description).
And I am not sure how a driver would make the selection...
In theory though, a UAC3 device should work out of the box even if the
host only supports UAC1 or UAC2.
+/*
+ * v1.0, v2.0 and v3.0 of this standard have many things in common. For the rest
+ * of the definitions, please refer to audio.h and audio-v2.h
+ */
+
+/* All High Capability descriptors have these 2 fields at the beginning */
+struct uac3_hc_descriptor_header {
+ __le16 wLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 wDescriptorID;
+} __attribute__ ((packed));
+
+/* 4.3.1 CLUSTER DESCRIPTOR HEADER */
+struct uac3_cluster_header_descriptor {
+ __le16 wLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 wDescriptorID;
+ __u8 bNrChannels;
+} __attribute__ ((packed));
+
+/* 4.3.2.1 SEGMENTS */
+struct uac3_cluster_segment_descriptor {
+ __le16 wLength;
+ __u8 bSegmentType;
+ /* __u8[0]; segment-specific data */
+} __attribute__ ((packed));
+
+/* 4.3.2.1.1 END SEGMENT */
+struct uac3_cluster_end_segment_descriptor {
+ __le16 wLength;
+ __u8 bSegmentType; /* Constant END_SEGMENT */
+} __attribute__ ((packed));
+
you didn't include the definitions in 4.3.2.1.2
Cluster Descriptor Segment
Vendor Defined Segment
+/* 4.3.2.1.3.1 INFORMATION SEGMENT */
+struct uac3_cluster_information_segment_descriptor {
+ __le16 wLength;
+ __u8 bSegmentType;
this field is a CHANNEL_INFORMATION constant.
+ __u8 bChPurpose;
+ __u8 bChRelationship;
+ __u8 bChGroupID;
+} __attribute__ ((packed));
+
+/* 4.5.2 CLASS-SPECIFIC AC INTERFACE DESCRIPTOR */
+struct uac3_ac_header_descriptor {
+ __u8 bLength; /* 10 */
+ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */
+ __u8 bDescriptorSubtype; /* HEADER descriptor subtype */
+ __u8 bCategory;
+
+ /* includes Clock Source, Unit, Terminal, and Power Domain desc. */
+ __le16 wTotalLength;
+
+ __le32 bmControls;
+} __attribute__ ((packed));
+
Missing extended terminal descriptor header from 4.5.2.3.2?
Missing multi-function processing unit descriptor header from 4.5.2.10.3 ?
+
+/* bmAttribute fields */
+#define UAC3_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC3_CLOCK_SOURCE_TYPE_INT 0x1
+#define UAC3_CLOCK_SOURCE_ASYNC (0 << 2)
+#define UAC3_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 1)
+
+/* 4.5.2.13 CLOCK SELECTOR DESCRIPTOR */
+struct uac3_clock_selector_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bNrInPins;
+ __u8 baCSourceID[];
+ /* bmControls and wCSelectorDescrStr omitted */
why is this omitted here and not below in the clock multiplier descriptor?
+} __attribute__((packed) > +
+/* 4.5.2.14 CLOCK MULTIPLIER DESCRIPTOR */
+struct uac3_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __le32 bmControls;
+ __le16 wCMultiplierDescrStr;
+} __attribute__((packed));
[snip]
+
+/* 4.5.2.15 POWER DOMAIN DESCRIPTOR */
+struct uac3_power_domain_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bPowerDomainID;
+ __le16 waRecoveryTime1;
+ __le16 waRecoveryTime2;
+ __u8 bNrEntities;
+ __u8 baEntityID[];
+ /* wPDomainDescrStr omitted */
why?
+} __attribute__((packed));
+
+/* As above, but more useful for defining your own descriptors */
+#define DECLARE_UAC3_POWER_DOMAIN_DESCRIPTOR(n) \
+struct uac3_power_domain_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bPowerDomainID; \
+ __le16 waRecoveryTime1; \
+ __le16 waRecoveryTime2; \
+ __u8 bNrEntities; \
+ __u8 baEntityID[n]; \
+ __le16 wPDomainDescrStr; \
+} __attribute__ ((packed))
+
any specific reason why the descriptors are not added in linear order,
following the spec definition? all the descriptors below could be added
earlier.
+/* 4.5.2.1 INPUT TERMINAL DESCRIPTOR */
+struct uac3_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __le16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bCSourceID;
+ __le32 bmControls;
+ __le16 wClusterDescrID;
+ __le16 wExTerminalDescrID;
+ __le16 wConnectorsDescrID;
+ __le16 wTerminalDescrStr;
+} __attribute__((packed));
+
+
+/* 4.7.2 CLASS-SPECIFIC AS INTERFACE DESCRIPTOR */
+struct uac3_as_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalLink;
+ __le32 bmControls;
+ __le16 wClusterDescrID;
+ __le64 bmFormats;
+ __u8 bSubslotSize;
+ __u8 bBitResolution;
+ __le16 bmAuxProtocols;
+ __u8 bControlSize;
+} __attribute__((packed));
+
+#define UAC3_FORMAT_TYPE_I_RAW_DATA (1 << 6)
This seems to come from Table A1 in the formats document, is it inserted
here because of the relationship with the bmFormats? If yes, we should
probably add the full list from Table A1 (as done below for the other codes)
+
+/* 4.8.1.2 CLASS-SPECIFIC AS ISOCHRONOUS AUDIO DATA ENDPOINT DESCRIPTOR */
+struct uac3_iso_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le32 bmControls;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+
+#define UAC3_CONTROL_PITCH (3 << 0)
+#define UAC3_CONTROL_DATA_OVERRUN (3 << 2)
+#define UAC3_CONTROL_DATA_UNDERRUN (3 << 4)
these are really masks, no?
+
+/* 6.1 INTERRUPT DATA MESSAGE */
+#define UAC3_INTERRUPT_DATA_MSG_VENDOR (1 << 0)
+#define UAC3_INTERRUPT_DATA_MSG_EP (1 << 1)
this is the same as in UAC2
+
+struct uac3_interrupt_data_msg {
+ __u8 bInfo;
+ __u8 bSourceType;
+ __le16 wValue;
+ __le16 wIndex;
+} __attribute__((packed));
This seems identical to UAC2, the difference being the bSourceType with
additional values (was bAttribute).
+
+/* A.2 AUDIO AUDIO FUNCTION SUBCLASS CODES */
+#define UAC3_FUNCTION_SUBCLASS_UNDEFINED 0x00
+#define UAC3_FUNCTION_SUBCLASS_FULL_ADC_3_0 0x01
+#define UAC3_FUNCTION_SUBCLASS_GENERIC_IO 0x20
+#define UAC3_FUNCTION_SUBCLASS_HEADPHONE 0x21
+#define UAC3_FUNCTION_SUBCLASS_SPEAKER 0x22
+#define UAC3_FUNCTION_SUBCLASS_MICROPHONE 0x23
+#define UAC3_FUNCTION_SUBCLASS_HEADSET 0x24
+#define UAC3_FUNCTION_SUBCLASS_HEADSET_ADAPTER 0x25
+#define UAC3_FUNCTION_SUBCLASS_SPEAKERPHONE 0x26
mention that these are linked to BADD profiles.
+
+/* A.7 AUDIO FUNCTION CATEGORY CODES */
+#define UAC3_FUNCTION_SUBCLASS_UNDEFINED 0x00
+#define UAC3_FUNCTION_DESKTOP_SPEAKER 0x01
+#define UAC3_FUNCTION_HOME_THEATER 0x02
+#define UAC3_FUNCTION_MICROPHONE 0x03
+#define UAC3_FUNCTION_HEADSET 0x04
+#define UAC3_FUNCTION_TELEPHONE 0x05
+#define UAC3_FUNCTION_CONVERTER 0x06
+#define UAC3_FUNCTION_SOUND_RECORDER 0x07
+#define UAC3_FUNCTION_IO_BOX 0x08
+#define UAC3_FUNCTION_MUSICAL_INSTRUMENT 0x09
+#define UAC3_FUNCTION_PRO_AUDIO 0x0a
+#define UAC3_FUNCTION_AUDIO_VIDEO 0x0b
+#define UAC3_FUNCTION_CONTROL_PANEL 0x0c
+#define UAC3_FUNCTION_HEADPHONE 0x0d
+#define UAC3_FUNCTION_GENERIC_SPEAKER 0x0e
+#define UAC3_FUNCTION_HEADSET_ADAPTER 0x0f
+#define UAC3_FUNCTION_SPEAKERPHONE 0x10
+#define UAC3_FUNCTION_OTHER 0xff
+
+/* A.8 AUDIO CLASS-SPECIFIC DESCRIPTOR TYPES */
+#define UAC3_CS_UNDEFINED 0x20
+#define UAC3_CS_DEVICE 0x21
+#define UAC3_CS_CONFIGURATION 0x22
+#define UAC3_CS_STRING 0x23
+#define UAC3_CS_INTERFACE 0x24
+#define UAC3_CS_ENDPOINT 0x25
+#define UAC3_CS_CLUSTER 0x26
+
+/* A.10 CLUSTER DESCRIPTOR SEGMENT TYPES */
+#define UAC3_SEGMENT_UNDEFINED 0x00
+#define UAC3_CLUSTER_DESCRIPTION 0x01
+#define UAC3_CLUSTER_VENDOR_DEFINED 0x1F
+#define UAC3_CHANNEL_INFORMATION 0x20
+#define UAC3_CHANNEL_AMBISONIC 0x21
+#define UAC3_CHANNEL_DESCRIPTION 0x22
+#define UAC3_CHANNEL_VENDOR_DEFINED 0xFE
+#define UAC3_END_SEGMENT 0xFF
+
+/* A.11 CHANNEL PURPOSE DEFINITIONS */
+#define UAC3_PURPOSE_UNDEFINED 0x00
+#define UAC3_PURPOSE_GENERIC_AUDIO 0x01
+#define UAC3_PURPOSE_VOICE 0x02
+#define UAC3_PURPOSE_SPEECH 0x03
+#define UAC3_PURPOSE_AMBIENT 0x04
+#define UAC3_PURPOSE_REFERENCE 0x05
+#define UAC3_PURPOSE_ULTRASONIC 0x06
+#define UAC3_PURPOSE_VIBROKINETIC 0x07
+#define UAC3_PURPOSE_NON_AUDIO 0xFF
+
+/* A.12 CHANNEL RELATIONSHIP DEFINITIONS */
+/* FIXME: spec is missing these constants. Few found in BasicAudioDevice3.pdf */
yes, this is a known bug in the released UAC3 document, the values were
removed by accident. If this helps, here's what I have from the last
release candidate, this will hopefully be corrected soon.
RELATIONSHIP_UNDEFINED UND 0x00
MONO M 0x01
LEFT L 0x02
RIGHT R 0x03
ARRAY AR 0x04
PATTERN_X PX 0x20
PATTERN_Y PY 0x21
PATTERN_A PA 0x22
PATTERN_B PB 0x23
PATTERN_M PM 0x24
PATTERN_S PS 0x25
Front Left FL 0x80
Front Right FR 0x81
Front Center FC 0x82
Front Left of Center FLC 0x83
Front Right of Center FRC 0x84
Front Wide Left FWL 0x85
Front Wide Right FWR 0x86
Side Left SL 0x87
Side Right SR 0x88
Surround Array Left SAL 0x89
Surround Array Right SAR 0x8A
Back Left BL 0x8B
Back Right BR 0x8C
Back Center BC 0x8D
Back Left of Center BLC 0x8E
Back Right of Center BRC 0x8F
Back Wide Left BWL 0x90
Back Wide Right BWR 0x91
Top Center TC 0x92
Top Front Left TFL 0x93
Top Front Right TFR 0x94
Top Front Center TFC 0x95
Top Front Left of Center TFLC 0x96
Top Front Right of Center TFRC 0x97
Top Front Wide Left TFWL 0x98
Top Front Wide Right TFWR 0x99
Top Side Left TSL 0x9A
Top Side Right TSR 0x9B
Top Surround Array Left TSAL 0x9C
Top Surround Array Right TSAR 0x9D
Top Back Left TBL 0x9E
Top Back Right TBR 0x9F
Top Back Center TBC 0xA0
Top Back Left Of Center TBLC 0xA1
Top Back Right Of Center TBRC 0xA2
Top Back Wide Left TBWL 0xA3
Top Back Wide Right TBWR 0xA4
Bottom Center BC 0xA5
Bottom Front Left BFL 0xA6
Bottom Front Right BFR 0xA7
Bottom Front Center BFC 0xA8
Bottom Front Left Of Center BFLC 0xA9
Bottom Front Right Of Center BFRC 0xAA
Bottom Front Wide Left BFWL 0xAB
Bottom Front Wide Right BFWR 0xAC
Bottom Side Left BSL 0xAD
Bottom Side Right BSR 0xAE
Bottom Surround Array Left BSAL 0xAF
Bottom Surround Array Right BSAR 0xB0
Bottom Back Left BBL 0xB1
Bottom Back Right BBR 0xB2
Bottom Back Center BBC 0xB3
Bottom Back Left Of Center BBLC 0xB4
Bottom Back Right Of Center BBRC 0xB5
Bottom Back Wide Left BBWL 0xB6
Bottom Back Wide Right BBWR 0xB7
Low Frequency Effects LFE 0xB8
Low Frequency Effects Left LFEL 0xB9
Low Frequency Effects Right LFER 0xBA
Headphone Left HPL 0xBB
Headphone Right HPR 0xBC
+#define UAC3_CH_RELATIONSHIP_UNDEFINED 0x00
+#define UAC3_CH_MONO 0x01
+#define UAC3_CH_LEFT 0x02
+#define UAC3_CH_RIGHT 0x03
+#define UAC3_CH_FRONT_LEFT 0x80
+#define UAC3_CH_FRONT_RIGHT 0x81
+#define UAC3_CH_FRONT_CENTER 0x82
+#define UAC3_CH_SURROUND_ARRAY_LEFT 0x89
+#define UAC3_CH_SURROUND_ARRAY_RIGHT 0x8A
+#define UAC3_CH_LOW_FREQUENCY_EFFECTS 0xB8
+
+/* A.15 AUDIO CLASS-SPECIFIC AC INTERFACE DESCRIPTOR SUBTYPES */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC3_EXTENDED_TERMINAL 0x04
+#define UAC3_MIXER_UNIT 0x05
+#define UAC3_SELECTOR_UNIT 0x06
+#define UAC3_FEATURE_UNIT 0x07
+#define UAC3_EFFECT_UNIT 0x08
+#define UAC3_PROCESSING_UNIT 0x09
+#define UAC3_EXTENSION_UNIT 0x0a
+#define UAC3_CLOCK_SOURCE 0x0b
+#define UAC3_CLOCK_SELECTOR 0x0c
+#define UAC3_CLOCK_MULTIPLIER 0x0d
+#define UAC3_SAMPLE_RATE_CONVERTER 0x0e
+#define UAC3_CONNECTORS 0x0f
+#define UAC3_POWER_DOMAIN 0x10
+
+/* A.22 AUDIO CLASS-SPECIFIC REQUEST CODES */
+#define UAC3_CS_REQ_CUR 0x01
+#define UAC3_CS_REQ_RANGE 0x02
+#define UAC3_CS_REQ_MEM 0x03
these first 3 are already in UAC2
+#define UAC3_CS_REQ_INTEN 0x04
+#define UAC3_CS_REQ_STRING 0x05
+#define UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR 0x06
the last 3 are really UAC3-specific
+
+/* A.23.1 AUDIOCONTROL INTERFACE CONTROL SELECTORS */
+#define UAC3_AC_CONTROL_UNDEFINED 0x00
+#define UAC3_AC_ACTIVE_INTERFACE_CONTROL 0x01
+#define UAC3_AC_POWER_DOMAIN_CONTROL 0x02
+
+#endif /* __LINUX_USB_AUDIO_V3_H */
diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h
index a4680a5..66ec2ae 100644
--- a/include/uapi/linux/usb/audio.h
+++ b/include/uapi/linux/usb/audio.h
@@ -26,6 +26,7 @@
/* bInterfaceProtocol values to denote the version of the standard used */
#define UAC_VERSION_1 0x00
#define UAC_VERSION_2 0x20
+#define UAC_VERSION_3 0x30
/* A.2 Audio Interface Subclass Codes */
#define USB_SUBCLASS_AUDIOCONTROL 0x01
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 3dc36d9..df3f0ab 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -7,6 +7,7 @@
* Alan Cox (alan@xxxxxxxxxxxxxxxxxxx)
* Thomas Sailer (sailer@xxxxxxxxxxxxxx)
*
+ * Audio Class 3.0 support by Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
does this mean new copyright?
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -44,6 +45,7 @@
#include <linux/mutex.h>
#include <linux/usb/audio.h>
#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
#include <linux/module.h>
#include <sound/control.h>
@@ -261,7 +263,8 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
break;
}
- case UAC_VERSION_2: {
+ case UAC_VERSION_2:
+ case UAC_VERSION_3: {
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
@@ -281,7 +284,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
}
if (!assoc) {
- dev_err(&dev->dev, "Audio class v2 interfaces need an interface association\n");
+ dev_err(&dev->dev, "Audio class v2/v3 interfaces need an interface association\n");
yes, but they can have more than one, so how do you handle the selection
(see 3.3)?
return -EINVAL;
}
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 111b0f0..5e2934f 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -21,7 +21,7 @@ struct audioformat {
unsigned char endpoint; /* endpoint */
unsigned char ep_attr; /* endpoint attributes */
unsigned char datainterval; /* log_2 of data packet interval */
- unsigned char protocol; /* UAC_VERSION_1/2 */
+ unsigned char protocol; /* UAC_VERSION_1/2/3 */
unsigned int maxpacksize; /* max. packet size */
unsigned int rates; /* rate bitmasks */
unsigned int rate_min, rate_max; /* min/max rates */
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 26dd5f2..04361d7 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -23,6 +23,7 @@
#include <linux/usb.h>
#include <linux/usb/audio.h>
#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
#include <sound/core.h>
#include <sound/info.h>
@@ -50,6 +51,22 @@
return NULL;
}
+static struct uac3_clock_source_descriptor *
+ snd_usb_find_clock_source_v3(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac3_clock_source_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC3_CLOCK_SOURCE))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
static struct uac_clock_selector_descriptor *
snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
int clock_id)
@@ -66,6 +83,22 @@
return NULL;
}
+static struct uac3_clock_selector_descriptor *
+ snd_usb_find_clock_selector_v3(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac3_clock_selector_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC3_CLOCK_SELECTOR))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
static struct uac_clock_multiplier_descriptor *
snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
int clock_id)
@@ -82,6 +115,22 @@
return NULL;
}
+static struct uac3_clock_multiplier_descriptor *
+ snd_usb_find_clock_multiplier_v3(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac3_clock_multiplier_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC3_CLOCK_MULTIPLIER))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
{
unsigned char buf;
@@ -135,19 +184,33 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
return ret;
}
-static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
+ int protocol,
+ int source_id)
{
int err;
unsigned char data;
struct usb_device *dev = chip->dev;
- struct uac_clock_source_descriptor *cs_desc =
- snd_usb_find_clock_source(chip->ctrl_intf, source_id);
-
- if (!cs_desc)
- return 0;
+ u32 bmControls;
+
+ if (protocol == UAC_VERSION_3) {
+ struct uac3_clock_source_descriptor *cs_desc =
+ snd_usb_find_clock_source_v3(chip->ctrl_intf, source_id);
+
+ if (!cs_desc)
+ return 0;
+ bmControls = le32_to_cpu(cs_desc->bmControls);
+ } else { /* UAC_VERSION_1/2 */
no, clock sources are only in UAC2.
+ struct uac_clock_source_descriptor *cs_desc =
+ snd_usb_find_clock_source(chip->ctrl_intf, source_id);
+
+ if (!cs_desc)
+ return 0;
+ bmControls = cs_desc->bmControls;
+ }
/* If a clock source can't tell us whether it's valid, we assume it is */
- if (!uac2_control_is_readable(cs_desc->bmControls,
+ if (!uac_v2v3_control_is_readable(bmControls,
UAC2_CS_CONTROL_CLOCK_VALID - 1))
return 1;
@@ -167,9 +230,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
return !!data;
}
-static int __uac_clock_find_source(struct snd_usb_audio *chip,
- int entity_id, unsigned long *visited,
- bool validate)
+static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
+ unsigned long *visited, bool validate)
{
struct uac_clock_source_descriptor *source;
struct uac_clock_selector_descriptor *selector;
@@ -188,7 +250,8 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
source = snd_usb_find_clock_source(chip->ctrl_intf, entity_id);
if (source) {
entity_id = source->bClockID;
- if (validate && !uac_clock_source_is_valid(chip, entity_id)) {
+ if (validate && !uac_clock_source_is_valid(chip, UAC_VERSION_2,
+ entity_id)) {
usb_audio_err(chip,
"clock source %d is not valid, cannot use\n",
entity_id);
@@ -257,6 +320,97 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
return -EINVAL;
}
+static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
+ unsigned long *visited, bool validate)
+{
+ struct uac3_clock_source_descriptor *source;
+ struct uac3_clock_selector_descriptor *selector;
+ struct uac3_clock_multiplier_descriptor *multiplier;
+
+ entity_id &= 0xff;
+
+ if (test_and_set_bit(entity_id, visited)) {
+ usb_audio_warn(chip,
+ "%s(): recursive clock topology detected, id %d.\n",
+ __func__, entity_id);
+ return -EINVAL;
+ }
+
+ /* first, see if the ID we're looking for is a clock source already */
+ source = snd_usb_find_clock_source_v3(chip->ctrl_intf, entity_id);
+ if (source) {
+ entity_id = source->bClockID;
+ if (validate && !uac_clock_source_is_valid(chip, UAC_VERSION_3,
+ entity_id)) {
+ usb_audio_err(chip,
+ "clock source %d is not valid, cannot use\n",
+ entity_id);
+ return -ENXIO;
+ }
+ return entity_id;
+ }
+
+ selector = snd_usb_find_clock_selector_v3(chip->ctrl_intf, entity_id);
+ if (selector) {
+ int ret, i, cur;
+
+ /* the entity ID we are looking for is a selector.
+ * find out what it currently selects */
+ ret = uac_clock_selector_get_val(chip, selector->bClockID);
+ if (ret < 0)
+ return ret;
+
+ /* Selector values are one-based */
+
+ if (ret > selector->bNrInPins || ret < 1) {
+ usb_audio_err(chip,
+ "%s(): selector reported illegal value, id %d, ret %d\n",
+ __func__, selector->bClockID, ret);
+
+ return -EINVAL;
+ }
+
+ cur = ret;
+ ret = __uac3_clock_find_source(chip, selector->baCSourceID[ret - 1],
+ visited, validate);
+ if (!validate || ret > 0 || !chip->autoclock)
+ return ret;
+
+ /* The current clock source is invalid, try others. */
+ for (i = 1; i <= selector->bNrInPins; i++) {
+ int err;
+
+ if (i == cur)
+ continue;
+
+ ret = __uac3_clock_find_source(chip, selector->baCSourceID[i - 1],
+ visited, true);
+ if (ret < 0)
+ continue;
+
+ err = uac_clock_selector_set_val(chip, entity_id, i);
+ if (err < 0)
+ continue;
+
+ usb_audio_info(chip,
+ "found and selected valid clock source %d\n",
+ ret);
+ return ret;
+ }
+
+ return -ENXIO;
+ }
+
+ /* FIXME: multipliers only act as pass-thru element for now */
+ multiplier = snd_usb_find_clock_multiplier_v3(chip->ctrl_intf,
+ entity_id);
+ if (multiplier)
+ return __uac3_clock_find_source(chip, multiplier->bCSourceID,
+ visited, validate);
+
+ return -EINVAL;
the difference between clock structures is not that big really between
UAC2 and UAC3 (wider bmcontrols, change to reference terminal and
wClockSourceStr_), could this code be refactored to handle both UAC2 and
UAC3?
+}
+
/*
* For all kinds of sample rate settings and other device queries,
* the clock source (end-leaf) must be used. However, clock selectors,
@@ -268,12 +422,22 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
*
* Returns the clock source UnitID (>=0) on success, or an error.
*/
-int snd_usb_clock_find_source(struct snd_usb_audio *chip, int entity_id,
- bool validate)
+int snd_usb_clock_find_source(struct snd_usb_audio *chip, int protocol,
+ int entity_id, bool validate)
{
DECLARE_BITMAP(visited, 256);
memset(visited, 0, sizeof(visited));
- return __uac_clock_find_source(chip, entity_id, visited, validate);
+
+ switch (protocol) {
+ case UAC_VERSION_2:
+ return __uac_clock_find_source(chip, entity_id, visited,
+ validate);
+ case UAC_VERSION_3:
+ return __uac3_clock_find_source(chip, entity_id, visited,
+ validate);
this looks again very similar, could this be optimized?
#include <sound/core.h>
#include <sound/pcm.h>
@@ -39,11 +40,11 @@
* @dev: usb device
* @fp: audioformat record
* @format: the format tag (wFormatTag)
- * @fmt: the format type descriptor
+ * @fmt: the format type descriptor (v1/v2) or AudioStreaming descriptor (v3)
*/
static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
struct audioformat *fp,
- unsigned int format, void *_fmt)
+ u64 format, void *_fmt)
{
int sample_width, sample_bytes;
u64 pcm_formats = 0;
@@ -69,6 +70,17 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
format <<= 1;
break;
}
+ case UAC_VERSION_3: {
+ struct uac3_as_header_descriptor *as = _fmt;
+ sample_width = as->bBitResolution;
+ sample_bytes = as->bSubslotSize;
+
+ if (format & UAC3_FORMAT_TYPE_I_RAW_DATA)
+ pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
could this be expanded to add at least basic PCM (D0 set).
+int snd_usb_parse_audio_format_v3(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ struct uac3_as_header_descriptor *as,
+ int stream)
+{
+ u64 format = le64_to_cpu(as->bmFormats);
+ int err;
+
+ /* Type I format bits are D0..D6 */
+ if (format & 0x7f)
+ fp->fmt_type = UAC_FORMAT_TYPE_I;
+ else
+ fp->fmt_type = UAC_FORMAT_TYPE_III;
maybe mention that this test only work because type IV is not supported,
otherwise this wouldn't quite right.
+int snd_usb_parse_audio_format_v3(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ struct uac3_as_header_descriptor *as,
+ int stream);
#endif /* __USBAUDIO_FORMAT_H */
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 9732edf..5b5dfe4 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -51,6 +51,7 @@
#include <linux/usb.h>
#include <linux/usb/audio.h>
#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
#include <sound/core.h>
#include <sound/control.h>
@@ -189,7 +190,7 @@ static void *find_audio_control_unit(struct mixer_build *state,
USB_DT_CS_INTERFACE)) != NULL) {
if (hdr->bLength >= 4 &&
hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
- hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+ hdr->bDescriptorSubtype <= UAC3_SAMPLE_RATE_CONVERTER &&
hdr->bUnitID == unit)
this looks like a mistake, the definitions are
#define UAC3_SAMPLE_RATE_CONVERTER 0x0e
#define UAC3_CONNECTORS 0x0f
#define UAC3_POWER_DOMAIN 0x10
You will miss the last two with this test.
- case UAC1_PROCESSING_UNIT:
- case UAC1_EXTENSION_UNIT:
- /* UAC2_PROCESSING_UNIT_V2 */
- /* UAC2_EFFECT_UNIT */
- case UAC2_EXTENSION_UNIT_V2: {
- struct uac_processing_unit_descriptor *d = p1;
-
- if (state->mixer->protocol == UAC_VERSION_2 &&
- hdr[2] == UAC2_EFFECT_UNIT) {
- /* UAC2/UAC1 unit IDs overlap here in an
- * uncompatible way. Ignore this unit for now.
- */
+
+ /* REVISIT: UAC3 IT doesn't have channels/cfg */
+ term->channels = 0;
+ term->chconfig = 0;
It does, but you need to get the information from the wClusterDescrID
[snip]
+/* UAC3 device stores channels information in Cluster Descriptors */
+static struct
+snd_pcm_chmap_elem *convert_chmap_v3(struct uac3_cluster_header_descriptor
+ *cluster)
+{
+ unsigned int channels = cluster->bNrChannels;
+ struct snd_pcm_chmap_elem *chmap;
+ void *p = cluster;
+ int len, c;
+
+ if (channels > ARRAY_SIZE(chmap->map))
+ return NULL;
+
+ chmap = kzalloc(sizeof(*chmap), GFP_KERNEL);
+ if (!chmap)
+ return NULL;
+
+ len = le16_to_cpu(cluster->wLength);
+ c = 0;
+ p += sizeof(struct uac3_cluster_header_descriptor);
+
+ while (((p - (void *)cluster) < len) && (c < channels)) {
+ struct uac3_cluster_segment_descriptor *cs_desc = p;
+ u16 cs_len;
+ u8 cs_type;
+
+ cs_len = le16_to_cpu(cs_desc->wLength);
+ cs_type = cs_desc->bSegmentType;
+
+ if (cs_type == UAC3_CHANNEL_INFORMATION) {
+ struct uac3_cluster_information_segment_descriptor *is = p;
+ unsigned char map;
+
+ /*
+ * FIXME: this conversion is simplified, because
+ * asound.h doesn't have UAC3 values yet
yes, we need to have a mapping between USB and CEA definitions (which
are aligned to some extent btw)
+ */
+ switch (is->bChPurpose) {
+ case UAC3_CH_MONO:
+ map = SNDRV_CHMAP_MONO;
+ break;
+ case UAC3_CH_LEFT:
+ case UAC3_CH_FRONT_LEFT:
+ case UAC3_CH_SURROUND_ARRAY_LEFT:
+ map = SNDRV_CHMAP_FL;
+ break;
+ case UAC3_CH_RIGHT:
+ case UAC3_CH_FRONT_RIGHT:
+ case UAC3_CH_SURROUND_ARRAY_RIGHT:
+ map = SNDRV_CHMAP_FR;
+ break;
+ case UAC3_CH_FRONT_CENTER:
+ map = SNDRV_CHMAP_FC;
+ break;
+ case UAC3_CH_LOW_FREQUENCY_EFFECTS:
+ map = SNDRV_CHMAP_LFE;
+ break;
+ case UAC3_CH_RELATIONSHIP_UNDEFINED:
+ default:
+ map = SNDRV_CHMAP_UNKNOWN;
+ break;