On Wed, Nov 8, 2017 at 2:59 AM, Xu YiPing <xuyiping@xxxxxxxxxxxxx> wrote:
cortex a73 pmu is supported, use it instead of armpmu-v3
The subject is misleading and you need a better commit message. Why is
this change needed? You are going from 1 to 2 devices.
Missing your S-o-B, too.
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 13ae69f..f638897 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -203,21 +203,25 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu_a53 {
Don't use '_' in node names. Building with W=2 will tell you this.
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
- <&cpu3>,
- <&cpu4>,
+ <&cpu3>;
+ };
+
+ pmu_a73 {
+ compatible = "arm,cortex-a73-pmu";
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu4>,
<&cpu5>,
<&cpu6>,
<&cpu7>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
.