[PATCH 3/7] scsi: bfa: improve bfa_ioc_send_enable/disable data

[Arnd Bergmann]

In bfa_ioc_send_enable, we use the deprecated do_gettimeofday() function
to read the current time. This is not a problem, since the firmware
interface is already limited to 32-bit timestamps, but it's better
to use ktime_get_seconds() and document what the limitation is.

I noticed that I did the same change in commit a5af83925363 ("bna:
avoid writing uninitialized data into hw registers") for the ethernet
driver. That commit also changed the "disable" funtion to initialize
the data we pass to the firmware properly, so I'm doing the same
thing here.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/scsi/bfa/bfa_ioc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 256f4afaccf9..117332537763 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -1809,13 +1809,12 @@ static void
 bfa_ioc_send_enable(struct bfa_ioc_s *ioc)
 {
 	struct bfi_ioc_ctrl_req_s enable_req;
-	struct timeval tv;
 
 	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
 		    bfa_ioc_portid(ioc));
 	enable_req.clscode = cpu_to_be16(ioc->clscode);
-	do_gettimeofday(&tv);
-	enable_req.tv_sec = be32_to_cpu(tv.tv_sec);
+	/* unsigned 32-bit time_t overflow in y2106 */
+	enable_req.tv_sec = be32_to_cpu(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req_s));
 }
 
@@ -1826,6 +1825,9 @@ bfa_ioc_send_disable(struct bfa_ioc_s *ioc)
 
 	bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ,
 		    bfa_ioc_portid(ioc));
+	disable_req.clscode = cpu_to_be16(ioc->clscode);
+	/* unsigned 32-bit time_t overflow in y2106 */
+	disable_req.tv_sec = be32_to_cpu(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req_s));
 }
 
-- 
2.9.0