[PATCH net v3 10/12] net/mac8390: Fix log messages
From: Finn Thain
Date: Sat Nov 11 2017 - 01:21:26 EST
Use dev_foo() and log the slot number instead of the unexpanded "eth%d".
Disambiguate the two identical "Card type %s is unsupported" messages.
Tested-by: Stan Johnson <userm57@xxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/8390/mac8390.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
index fb62310610a8..b091f24f7914 100644
--- a/drivers/net/ethernet/8390/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -308,14 +308,14 @@ static bool mac8390_rsrc_init(struct net_device *dev,
*/
if (nubus_get_func_dir(ndev, &dir) == -1) {
- pr_err("%s: Unable to get Nubus functional directory for slot %X!\n",
- dev->name, ndev->board->slot);
+ dev_err(&ndev->board->dev,
+ "Unable to get functional directory\n");
return false;
}
/* Get the MAC address */
if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) {
- pr_info("%s: Couldn't get MAC address!\n", dev->name);
+ dev_info(&ndev->board->dev, "MAC address resource not found\n");
return false;
}
@@ -325,8 +325,8 @@ static bool mac8390_rsrc_init(struct net_device *dev,
nubus_rewinddir(&dir);
if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS,
&ent) == -1) {
- pr_err("%s: Memory offset resource for slot %X not found!\n",
- dev->name, ndev->board->slot);
+ dev_err(&ndev->board->dev,
+ "Memory offset resource not found\n");
return false;
}
nubus_get_rsrc_mem(&offset, &ent, 4);
@@ -336,8 +336,8 @@ static bool mac8390_rsrc_init(struct net_device *dev,
nubus_rewinddir(&dir);
if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH,
&ent) == -1) {
- pr_info("%s: Memory length resource for slot %X not found, probing\n",
- dev->name, ndev->board->slot);
+ dev_info(&ndev->board->dev,
+ "Memory length resource not found, probing\n");
offset = mac8390_memsize(dev->mem_start);
} else {
nubus_get_rsrc_mem(&offset, &ent, 4);
@@ -380,8 +380,8 @@ static bool mac8390_rsrc_init(struct net_device *dev,
break;
default:
- pr_err("Card type %s is unsupported, sorry\n",
- ndev->board->name);
+ dev_err(&ndev->board->dev,
+ "No known base address for card type\n");
return false;
}
}
@@ -537,7 +537,8 @@ static int mac8390_initdev(struct net_device *dev,
case MAC8390_APPLE:
switch (mac8390_testio(dev->mem_start)) {
case ACCESS_UNKNOWN:
- pr_err("Don't know how to access card memory!\n");
+ dev_err(&board->dev,
+ "Don't know how to access card memory\n");
return -ENODEV;
case ACCESS_16:
@@ -603,21 +604,18 @@ static int mac8390_initdev(struct net_device *dev,
break;
default:
- pr_err("Card type %s is unsupported, sorry\n",
- board->name);
+ dev_err(&board->dev, "Unsupported card type\n");
return -ENODEV;
}
__NS8390_init(dev, 0);
/* Good, done, now spit out some messages */
- pr_info("%s: %s in slot %X (type %s)\n",
- dev->name, board->name, board->slot,
- cardname[type]);
- pr_info("MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
- dev->dev_addr, dev->irq,
- (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
- dev->mem_start, access_bitmode ? 32 : 16);
+ dev_info(&board->dev, "%s (type %s)\n", board->name, cardname[type]);
+ dev_info(&board->dev, "MAC %pM, IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
+ dev->dev_addr, dev->irq,
+ (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
+ dev->mem_start, access_bitmode ? 32 : 16);
return 0;
}
--
2.13.6