[GIT PULL] TTY/Serial patches for 4.15-rc1

From: Greg KH
Date: Mon Nov 13 2017 - 11:19:19 EST

Next message: Greg KH: "[GIT PULL] USB/PHY driver changes for 4.15-rc1"
Previous message: Greg KH: "[GIT PULL] Staging/IIO driver patches for 4.15-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The following changes since commit 8a5776a5f49812d29fe4b2d0a2d71675c3facf3f:

Linux 4.14-rc4 (2017-10-08 20:53:29 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.15-rc1

for you to fetch changes up to 57f5d648c45c3d40a3257c06629c14fd53c383bc:

tty: ehv_bytechan: fix spelling mistake (2017-11-08 14:27:10 +0100)

----------------------------------------------------------------
TTY/Serial patches for 4.15-rc1

Here is the big tty/serial driver pull request for 4.15-rc1.

Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat a
bit.

Nothing major, with no realy functional changes except better hardware
support for some platforms.

All of these have been in linux-next for a while with no reported
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

----------------------------------------------------------------
Aaron Sierra (1):
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X

Allen Pais (10):
drivers: tty: imx: use setup_timer() helper.
drivers: tty: mux: use setup_timer() helper.
drivers: tty: vcc: use setup_timer() helper.
drivers: tty: max3100: use setup_timer() helper.
drivers: tty: 8250: use setup_timer() helper.
drivers: tty: pnx8xxx: use setup_timer() helper.
drivers: tty: n_gsm: use setup_timer() helper.
drivers: tty: sn_console: use setup_timer() helper.
drivers: tty: ifx6x60: use setup_timer() helper.
drivers: tty: sa1100: use setup_timer() helper.

Allen Yan (5):
serial: mvebu-uart: support probe of multiple ports
serial: mvebu-uart: add soft reset at probe
serial: mvebu-uart: add function to change baudrate
serial: mvebu-uart: clear state register before IRQ request
serial: mvebu-uart: add TX interrupt trigger for pulse interrupts

Andy Lowe (1):
serial: sh-sci: suppress warning for ports without dma channels

Andy Shevchenko (1):
serial: 8250_mid: Enable HSU on Intel Cedar Fork PCH

Antonio Borneo (1):
ttyport: trivial fix for some typo in comments

Arnd Bergmann (1):
serial: mvebu-uart: drop incorrect memset

Arvind Yadav (2):
serial-uartlite: pr_err() strings should end with newlines
tty: ehv_bytechan: fix spelling mistake

Bhumika Goyal (1):
tty: serial: make sport_uart_ops static and const

Christophe JAILLET (1):
tty: synclink: Reuse an existing error handling path

Colin Ian King (3):
tty: max3100: remove unused variable rts and remove unused assignment
serial: core: remove redundant assignment to port
tty: serial: jsm: remove redundant pointer ts

Ed Blake (2):
serial: Add define for max baud rate divisor
serial: 8250_dw: Improve clock rate setting

Fabio Estevam (1):
serial: fsl_lpuart: Remove unused 'bd' variable

Frédéric Danis (2):
serdev: Add ACPI support
ACPI / scan: Fix enumeration for special UART devices

Geert Uytterhoeven (1):
serial: sh-sci: Use of_device_get_match_data() helper

Gimcuan Hui (6):
tty: serial: jsm: Add space before the open brace
tty: serial: jsm: change the type of local variable
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: fix coding style
tty: serial: jsm: add space before the open parenthesis '('

Greg Kroah-Hartman (6):
Merge 4.14-rc4 into tty-next
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serdev: Remove redundant license text
tty: Remove redundant license text

Ian Jamison (1):
serial: imx: Update cached mctrl value when changing RTS

Ji-Ze Hong (Peter Hong) (5):
serial: 8250_fintek: UART dynamic clocksource on Fintek F81866
serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H
serial: 8250_fintek: fix warning reported from smatch
serial: 8250_fintek: Fix finding base_port with activated SuperIO
serial: 8250_fintek: Fix crash with baud rate B0

Jibin Xu (1):
sysrq : fix Show Regs call trace on ARM

Jiri Slaby (1):
mxser: remove unused parameters

Joe Perches (1):
vt: Use consistent logging style

Johan Hovold (6):
serdev: enable TTY port controller support by default
serdev: ttyport: enforce tty-driver open() requirement
serdev: ttyport: add missing open() error handling
serdev: fix registration of second slave
serdev: fix controller-allocation error handling
tty: fix tty_ldisc_receive_buf() documentation

Kees Cook (13):
tty: metag_da: Convert timers to use timer_setup()
serial: m32r_sio: Convert timers to use timer_setup()
tty/sysrq: Convert timers to use timer_setup()
tty: mips_ejtag_fdc: Convert timers to use timer_setup()
tty: amba-pl011: Convert timers to use timer_setup()
serial: 8250: Convert timers to use timer_setup()
serial: bfin_uart: Convert timers to use timer_setup()
serial: sccnxp: Convert timers to use timer_setup()
tty/serial: altera_uart: Convert timers to use timer_setup()
tty: vcc: Convert timers to use timer_setup()
tty: cyclades: Convert timers to use timer_setup()
tty/serial: atmel: Convert timers to use timer_setup()
serial: m32r_sio: Drop redundant .data assignment

Lukas Wunner (3):
serial: omap: Fix EFR write on RTS deassertion
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
serial: pl011: Adopt generic flag to store auto RTS status

Martin Townsend (1):
omap_serial: Removing superfluous check on no interrupt pending.

Martyn Welch (3):
serial: imx: Use RX_BUF_SIZE to set size of RX buffer
serial: imx: Switch setting dma_is_txing from "false" to "0"
serial: imx: Correct comment imx_flush_buffer()

Matthias Kaehlcke (1):
serial: sh-sci: Fix init data attribute for struct 'port_cfg'

Meng Xu (1):
tty: vt: remove multi-fetch, derive font.height from font.data

Miquel Raynal (4):
serial: mvebu-uart: use a generic way to access the registers
serial: mvebu-uart: dissociate RX and TX interrupts
serial: mvebu-uart: augment the maximum number of ports
serial: mvebu-uart: support extended port registers layout

Philipp Zabel (1):
serial: imx: add hibernation support

Ricardo Ribalda Delgado (2):
serial: 8250_fintek: Return -EINVAL on invalid configuration
serial: 8250_fintek: Disable delays for ports != 0

Romain Izard (1):
tty/serial: atmel: Prevent a warning on suspend

Romain Perier (1):
serial: imx: only set dma_is_rxing when DMA starts

Sascha Hauer (5):
serial: atmel: Use common rs485 device tree parsing function
serial: fsl_lpuart: Use common rs485 device tree parsing function
serial: omap-serial: Use common rs485 device tree parsing function
serial: imx: default to half duplex rs485
serial: imx: Use common rs485 device tree parsing function

Shubhrajyoti Datta (1):
tty: xilinx_uartps: move to arch_initcall for earlier console

Takatoshi Akiyama (1):
serial: sh-sci: Fix unlocked access to SCSCR register

Thomas Meyer (1):
vt: Use bsearch library function in is_double_width

Thomas Rohloff (1):
tty: serial: meson: allow baud-rates lower than 9600

Tomas Melin (1):
serial: 8250: fix potential deadlock in rs485-mode

Troy Kisky (2):
tty: serial: imx: disable ageing timer interrupt if dma in use
tty: serial: imx: remove dead code imx_dma_rxint

Ulrich Hecht (1):
serial: sh-sci: Support for variable HSCIF hardware RX timeout

Uwe Kleine-König (2):
serial: Add common rs485 device tree parsing function
dt-bindings: serial: document rs485 bindings for various devices

Vikas Manocha (2):
Arm: dts: stm32: remove extra compatible string for uart
Arm: dts: stm32: remove extra compatible string from DT & driver

Yehuda Yitschak (1):
serial: mvebu-uart: use driver name when requesting an interrupt

Yixun Lan (1):
serial: meson: add Magic SysRq support

nixiaoming (1):
tty fix oops when rmmod 8250

.../devicetree/bindings/dma/stm32-dma.txt | 2 +-
.../devicetree/bindings/serial/atmel-usart.txt | 1 +
.../devicetree/bindings/serial/fsl-imx-uart.txt | 1 +
.../devicetree/bindings/serial/fsl-lpuart.txt | 1 +
.../devicetree/bindings/serial/omap_serial.txt | 1 +
.../devicetree/bindings/serial/st,stm32-usart.txt | 10 +-
arch/arm/boot/dts/stm32f429.dtsi | 12 +-
arch/arm/boot/dts/stm32f746.dtsi | 12 +-
arch/arm/boot/dts/stm32h743.dtsi | 4 +-
drivers/acpi/scan.c | 37 +-
drivers/tty/amiserial.c | 1 +
drivers/tty/bfin_jtag_comm.c | 3 +-
drivers/tty/cyclades.c | 17 +-
drivers/tty/ehv_bytechan.c | 9 +-
drivers/tty/goldfish.c | 11 +-
drivers/tty/hvc/hvc_bfin_jtag.c | 3 +-
drivers/tty/hvc/hvc_console.c | 15 +-
drivers/tty/hvc/hvc_console.h | 15 +-
drivers/tty/hvc/hvc_dcc.c | 13 +-
drivers/tty/hvc/hvc_opal.c | 16 +-
drivers/tty/hvc/hvc_rtas.c | 15 +-
drivers/tty/hvc/hvc_tile.c | 11 +-
drivers/tty/hvc/hvc_udbg.c | 15 +-
drivers/tty/hvc/hvc_vio.c | 15 +-
drivers/tty/hvc/hvc_xen.c | 15 +-
drivers/tty/hvc/hvcs.c | 15 +-
drivers/tty/hvc/hvsi.c | 15 +-
drivers/tty/ipwireless/main.c | 1 +
drivers/tty/isicom.c | 6 +-
drivers/tty/metag_da.c | 16 +-
drivers/tty/mips_ejtag_fdc.c | 13 +-
drivers/tty/moxa.c | 6 +-
drivers/tty/mxser.c | 22 +-
drivers/tty/n_gsm.c | 18 +-
drivers/tty/n_hdlc.c | 3 +-
drivers/tty/n_null.c | 14 +-
drivers/tty/n_r3964.c | 4 +-
drivers/tty/n_tracerouter.c | 12 +-
drivers/tty/n_tracesink.c | 12 +-
drivers/tty/n_tracesink.h | 12 +-
drivers/tty/n_tty.c | 4 +-
drivers/tty/nozomi.c | 15 +-
drivers/tty/rocket.c | 15 +-
drivers/tty/serdev/Kconfig | 8 +
drivers/tty/serdev/core.c | 152 +++++--
drivers/tty/serdev/serdev-ttyport.c | 31 +-
drivers/tty/serial/21285.c | 1 +
drivers/tty/serial/8250/8250.h | 6 +-
drivers/tty/serial/8250/8250_accent.c | 5 +-
drivers/tty/serial/8250/8250_acorn.c | 5 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 6 +-
drivers/tty/serial/8250/8250_bcm2835aux.c | 6 +-
drivers/tty/serial/8250/8250_boca.c | 5 +-
drivers/tty/serial/8250/8250_core.c | 23 +-
drivers/tty/serial/8250/8250_dma.c | 6 +-
drivers/tty/serial/8250/8250_dw.c | 36 +-
drivers/tty/serial/8250/8250_early.c | 5 +-
drivers/tty/serial/8250/8250_em.c | 14 +-
drivers/tty/serial/8250/8250_exar.c | 5 +-
drivers/tty/serial/8250/8250_exar_st16c554.c | 5 +-
drivers/tty/serial/8250/8250_fintek.c | 123 ++++-
drivers/tty/serial/8250/8250_fourport.c | 5 +-
drivers/tty/serial/8250/8250_fsl.c | 5 +-
drivers/tty/serial/8250/8250_gsc.c | 6 +-
drivers/tty/serial/8250/8250_hp300.c | 1 +
drivers/tty/serial/8250/8250_hub6.c | 5 +-
drivers/tty/serial/8250/8250_ingenic.c | 10 +-
drivers/tty/serial/8250/8250_lpc18xx.c | 6 +-
drivers/tty/serial/8250/8250_lpss.c | 5 +-
drivers/tty/serial/8250/8250_mid.c | 11 +-
drivers/tty/serial/8250/8250_moxa.c | 5 +-
drivers/tty/serial/8250/8250_mtk.c | 13 +-
drivers/tty/serial/8250/8250_of.c | 7 +-
drivers/tty/serial/8250/8250_omap.c | 5 +-
drivers/tty/serial/8250/8250_pci.c | 6 +-
drivers/tty/serial/8250/8250_pnp.c | 5 +-
drivers/tty/serial/8250/8250_port.c | 16 +-
drivers/tty/serial/8250/8250_pxa.c | 7 +-
drivers/tty/serial/8250/8250_uniphier.c | 11 +-
drivers/tty/serial/8250/serial_cs.c | 1 +
drivers/tty/serial/altera_jtaguart.c | 6 +-
drivers/tty/serial/altera_uart.c | 14 +-
drivers/tty/serial/amba-pl010.c | 15 +-
drivers/tty/serial/amba-pl011.c | 32 +-
drivers/tty/serial/apbuart.c | 1 +
drivers/tty/serial/ar933x_uart.c | 5 +-
drivers/tty/serial/arc_uart.c | 5 +-
drivers/tty/serial/atmel_serial.c | 65 +--
drivers/tty/serial/atmel_serial.h | 6 +-
drivers/tty/serial/bcm63xx_uart.c | 5 +-
drivers/tty/serial/bfin_sport_uart.c | 5 +-
drivers/tty/serial/bfin_sport_uart.h | 3 +-
drivers/tty/serial/bfin_uart.c | 10 +-
drivers/tty/serial/clps711x.c | 6 +-
drivers/tty/serial/cpm_uart/cpm_uart.h | 6 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 16 +-
drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 16 +-
drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 16 +-
drivers/tty/serial/digicolor-usart.c | 6 +-
drivers/tty/serial/dz.c | 1 +
drivers/tty/serial/earlycon-arm-semihost.c | 13 +-
drivers/tty/serial/earlycon.c | 5 +-
drivers/tty/serial/efm32-uart.c | 1 +
drivers/tty/serial/fsl_lpuart.c | 33 +-
drivers/tty/serial/icom.c | 16 +-
drivers/tty/serial/icom.h | 15 +-
drivers/tty/serial/ifx6x60.c | 20 +-
drivers/tty/serial/ifx6x60.h | 18 +-
drivers/tty/serial/imx.c | 103 ++---
drivers/tty/serial/ioc3_serial.c | 5 +-
drivers/tty/serial/ioc4_serial.c | 5 +-
drivers/tty/serial/ip22zilog.c | 1 +
drivers/tty/serial/jsm/jsm.h | 11 +-
drivers/tty/serial/jsm/jsm_cls.c | 11 +-
drivers/tty/serial/jsm/jsm_driver.c | 11 +-
drivers/tty/serial/jsm/jsm_neo.c | 11 +-
drivers/tty/serial/jsm/jsm_tty.c | 27 +-
drivers/tty/serial/kgdb_nmi.c | 5 +-
drivers/tty/serial/kgdboc.c | 5 +-
drivers/tty/serial/lantiq.c | 14 +-
drivers/tty/serial/lpc32xx_hs.c | 11 +-
drivers/tty/serial/m32r_sio.c | 14 +-
drivers/tty/serial/m32r_sio_reg.h | 4 +-
drivers/tty/serial/max3100.c | 16 +-
drivers/tty/serial/max310x.c | 6 +-
drivers/tty/serial/mcf.c | 6 +-
drivers/tty/serial/men_z135_uart.c | 5 +-
drivers/tty/serial/meson_uart.c | 31 +-
drivers/tty/serial/mpc52xx_uart.c | 5 +-
drivers/tty/serial/mps2-uart.c | 5 +-
drivers/tty/serial/mpsc.c | 6 +-
drivers/tty/serial/msm_serial.c | 10 +-
drivers/tty/serial/mux.c | 9 +-
drivers/tty/serial/mvebu-uart.c | 495 ++++++++++++++++-----
drivers/tty/serial/mxs-auart.c | 5 +-
drivers/tty/serial/netx-serial.c | 14 +-
drivers/tty/serial/omap-serial.c | 23 +-
drivers/tty/serial/owl-uart.c | 14 +-
drivers/tty/serial/pch_uart.c | 14 +-
drivers/tty/serial/pic32_uart.c | 3 +-
drivers/tty/serial/pic32_uart.h | 3 +-
drivers/tty/serial/pmac_zilog.c | 15 +-
drivers/tty/serial/pnx8xxx_uart.c | 11 +-
drivers/tty/serial/pxa.c | 6 +-
drivers/tty/serial/rp2.c | 5 +-
drivers/tty/serial/sa1100.c | 20 +-
drivers/tty/serial/samsung.c | 5 +-
drivers/tty/serial/samsung.h | 5 +-
drivers/tty/serial/sb1250-duart.c | 6 +-
drivers/tty/serial/sc16is7xx.c | 7 +-
drivers/tty/serial/sccnxp.c | 13 +-
drivers/tty/serial/serial-tegra.c | 13 +-
drivers/tty/serial/serial_core.c | 54 ++-
drivers/tty/serial/serial_ks8695.c | 7 +-
drivers/tty/serial/serial_mctrl_gpio.c | 11 +-
drivers/tty/serial/serial_mctrl_gpio.h | 12 +-
drivers/tty/serial/serial_txx9.c | 5 +-
drivers/tty/serial/sh-sci.c | 103 +++--
drivers/tty/serial/sh-sci.h | 3 +
drivers/tty/serial/sirfsoc_uart.c | 3 +-
drivers/tty/serial/sirfsoc_uart.h | 3 +-
drivers/tty/serial/sn_console.c | 23 +-
drivers/tty/serial/sprd_serial.c | 10 +-
drivers/tty/serial/st-asc.c | 7 +-
drivers/tty/serial/stm32-usart.c | 5 +-
drivers/tty/serial/stm32-usart.h | 2 +-
drivers/tty/serial/suncore.c | 1 +
drivers/tty/serial/sunhv.c | 1 +
drivers/tty/serial/sunsab.c | 1 +
drivers/tty/serial/sunsu.c | 1 +
drivers/tty/serial/sunzilog.c | 1 +
drivers/tty/serial/tilegx.c | 11 +-
drivers/tty/serial/timbuart.c | 14 +-
drivers/tty/serial/timbuart.h | 14 +-
drivers/tty/serial/uartlite.c | 7 +-
drivers/tty/serial/ucc_uart.c | 6 +-
drivers/tty/serial/vr41xx_siu.c | 15 +-
drivers/tty/serial/vt8500_serial.c | 10 +-
drivers/tty/serial/xilinx_uartps.c | 9 +-
drivers/tty/serial/zs.c | 1 +
drivers/tty/synclink.c | 6 +-
drivers/tty/synclink_gt.c | 3 +-
drivers/tty/synclinkmp.c | 2 +-
drivers/tty/sysrq.c | 18 +-
drivers/tty/tty_audit.c | 6 +-
drivers/tty/tty_baudrate.c | 1 +
drivers/tty/tty_buffer.c | 3 +-
drivers/tty/tty_io.c | 1 +
drivers/tty/tty_ioctl.c | 1 +
drivers/tty/tty_jobctrl.c | 1 +
drivers/tty/tty_ldisc.c | 1 +
drivers/tty/tty_ldsem.c | 4 +-
drivers/tty/tty_port.c | 5 +-
drivers/tty/vcc.c | 25 +-
drivers/tty/vt/consolemap.c | 1 +
drivers/tty/vt/keyboard.c | 1 +
drivers/tty/vt/vt.c | 107 ++---
fs/proc/proc_tty.c | 3 +-
include/acpi/acpi_bus.h | 2 +-
include/linux/cyclades.h | 3 +
include/linux/serial_core.h | 5 +
include/uapi/linux/serial_reg.h | 1 +
202 files changed, 1276 insertions(+), 1668 deletions(-)

Next message: Greg KH: "[GIT PULL] USB/PHY driver changes for 4.15-rc1"
Previous message: Greg KH: "[GIT PULL] Staging/IIO driver patches for 4.15-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]