[PATCH AUTOSEL for 4.9 07/56] clk: sunxi-ng: A31: Fix spdif clock register

[alexander . levin]

From: Marcus Cooper <codekipper@xxxxxxxxx>

[ Upstream commit 70421257c068b91476e70cade15fca68045d0693 ]

As the SPDIF was rarely documented on the earlier Allwinner SoCs
it was assumed that it had a similar clock register to the one
described in the H3 User Manual.

However this is not the case and it looks to shares the same setup
as the I2S clock registers.

Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 0cca3601d99e..df97e25aec76 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -468,8 +468,8 @@ static SUNXI_CCU_MUX_WITH_GATE(daudio0_clk, "daudio0", daudio_parents,
 static SUNXI_CCU_MUX_WITH_GATE(daudio1_clk, "daudio1", daudio_parents,
 			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
-static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
-			     0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", daudio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
 		      0x0cc, BIT(8), 0);
-- 
2.11.0