Re: [PATCH 1/2] x86,kvm: move qemu/guest FPU switching out to vcpu_run
From: quan.xu04@xxxxxxxxx
Date: Wed Nov 15 2017 - 01:59:57 EST
On 2017/11/15 05:54, riel@xxxxxxxxxx wrote:
From: Rik van Riel <riel@xxxxxxxxxx>
Currently, every time a VCPU is scheduled out, the host kernel will
first save the guest FPU/xstate context, then load the qemu userspace
FPU context, only to then immediately save the qemu userspace FPU
context back to memory. When scheduling in a VCPU, the same extraneous
FPU loads and saves are done.
Rik, be careful with VM migration. with you patch, I don't think you
could load fpu/xstate
 context accurately after VM migration.
Quan
Alibaba Cloud
This could be avoided by moving from a model where the guest FPU is
loaded and stored with preemption disabled, to a model where the
qemu userspace FPU is swapped out for the guest FPU context for
the duration of the KVM_RUN ioctl.
This is done under the VCPU mutex, which is also taken when other
tasks inspect the VCPU FPU context, so the code should already be
safe for this change. That should come as no surprise, given that
s390 already has this optimization.
No performance changes were detected in quick ping-pong tests on
my 4 socket system, which is expected since an FPU+xstate load is
on the order of 0.1us, while ping-ponging between CPUs is on the
order of 20us, and somewhat noisy.
There may be other tests where performance changes are noticeable.
Signed-off-by: Rik van Riel <riel@xxxxxxxxxx>
Suggested-by: Christian Borntraeger <borntraeger@xxxxxxxxxx>
---
arch/x86/include/asm/kvm_host.h | 13 +++++++++++++
arch/x86/kvm/x86.c | 34 +++++++++++++---------------------
include/linux/kvm_host.h | 2 +-
3 files changed, 27 insertions(+), 22 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9d7d856b2d89..ffe54958491f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -536,7 +536,20 @@ struct kvm_vcpu_arch {
struct kvm_mmu_memory_cache mmu_page_cache;
struct kvm_mmu_memory_cache mmu_page_header_cache;
+ /*
+ * QEMU userspace and the guest each have their own FPU state.
+ * In vcpu_run, we switch between the user and guest FPU contexts.
+ * While running a VCPU, the VCPU thread will have the guest FPU
+ * context.
+ *
+ * Note that while the PKRU state lives inside the fpu registers,
+ * it is switched out separately at VMENTER and VMEXIT time. The
+ * "guest_fpu" state here contains the guest FPU context, with the
+ * host PRKU bits.
+ */
+ struct fpu user_fpu;
struct fpu guest_fpu;
+
u64 xcr0;
u64 guest_supported_xcr0;
u32 guest_xstate_size;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 03869eb7fcd6..aad5181ed4e9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2917,7 +2917,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
srcu_read_unlock(&vcpu->kvm->srcu, idx);
pagefault_enable();
kvm_x86_ops->vcpu_put(vcpu);
- kvm_put_guest_fpu(vcpu);
vcpu->arch.last_host_tsc = rdtsc();
}
@@ -5228,13 +5227,10 @@ static void emulator_halt(struct x86_emulate_ctxt *ctxt)
static void emulator_get_fpu(struct x86_emulate_ctxt *ctxt)
{
- preempt_disable();
- kvm_load_guest_fpu(emul_to_vcpu(ctxt));
}
static void emulator_put_fpu(struct x86_emulate_ctxt *ctxt)
{
- preempt_enable();
}
static int emulator_intercept(struct x86_emulate_ctxt *ctxt,
@@ -6908,7 +6904,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
preempt_disable();
kvm_x86_ops->prepare_guest_switch(vcpu);
- kvm_load_guest_fpu(vcpu);
/*
* Disable IRQs before setting IN_GUEST_MODE. Posted interrupt
@@ -7255,12 +7250,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
}
}
+ kvm_load_guest_fpu(vcpu);
+
if (unlikely(vcpu->arch.complete_userspace_io)) {
int (*cui)(struct kvm_vcpu *) = vcpu->arch.complete_userspace_io;
vcpu->arch.complete_userspace_io = NULL;
r = cui(vcpu);
if (r <= 0)
- goto out;
+ goto out_fpu;
} else
WARN_ON(vcpu->arch.pio.count || vcpu->mmio_needed);
@@ -7269,6 +7266,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
else
r = vcpu_run(vcpu);
+out_fpu:
+ kvm_put_guest_fpu(vcpu);
out:
post_kvm_run_save(vcpu);
if (vcpu->sigset_active)
@@ -7663,32 +7662,25 @@ static void fx_init(struct kvm_vcpu *vcpu)
vcpu->arch.cr0 |= X86_CR0_ET;
}
+/* Swap (qemu) user FPU context for the guest FPU context. */
void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
{
- if (vcpu->guest_fpu_loaded)
- return;
-
- /*
- * Restore all possible states in the guest,
- * and assume host would use all available bits.
- * Guest xcr0 would be loaded later.
- */
- vcpu->guest_fpu_loaded = 1;
- __kernel_fpu_begin();
+ preempt_disable();
+ copy_fpregs_to_fpstate(&vcpu->arch.user_fpu);
/* PKRU is separately restored in kvm_x86_ops->run. */
__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state,
~XFEATURE_MASK_PKRU);
+ preempt_enable();
trace_kvm_fpu(1);
}
+/* When vcpu_run ends, restore user space FPU context. */
void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
{
- if (!vcpu->guest_fpu_loaded)
- return;
-
- vcpu->guest_fpu_loaded = 0;
+ preempt_disable();
copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu);
- __kernel_fpu_end();
+ copy_kernel_to_fpregs(&vcpu->arch.user_fpu.state);
+ preempt_enable();
++vcpu->stat.fpu_reload;
trace_kvm_fpu(0);
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 6882538eda32..354608487b8d 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -232,7 +232,7 @@ struct kvm_vcpu {
struct mutex mutex;
struct kvm_run *run;
- int guest_fpu_loaded, guest_xcr0_loaded;
+ int guest_xcr0_loaded;
struct swait_queue_head wq;
struct pid __rcu *pid;
int sigset_active;