[PATCH 5/6] staging: pi433: pi433_if.c: fix space(s) required coding style issues

From: Chase Metzger
Date: Wed Nov 15 2017 - 19:39:17 EST


Put space(s) in required spots to comply with the kernel coding style.

Signed-off-by: Chase Metzger <chasemetzger15@xxxxxxxxx>
---
drivers/staging/pi433/pi433_if.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index ad89504655af..ad99f6527bd6 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -323,9 +323,9 @@ pi433_receive(void *data)
dev->interrupt_rx_allowed = false;

/* wait for any tx to finish */
- dev_dbg(dev->dev,"rx: going to wait for any tx to finish");
+ dev_dbg(dev->dev, "rx: going to wait for any tx to finish");
retval = wait_event_interruptible(dev->rx_wait_queue, !dev->tx_active);
- if(retval) { /* wait was interrupted */
+ if (retval) { /* wait was interrupted */
dev->interrupt_rx_allowed = true;
wake_up_interruptible(&dev->tx_wait_queue);
return retval;
@@ -373,7 +373,7 @@ pi433_receive(void *data)
goto abort;
}
bytes_total = dev->rx_cfg.fixed_message_length;
- dev_dbg(dev->dev,"rx: msg len set to %d by fixed length", bytes_total);
+ dev_dbg(dev->dev, "rx: msg len set to %d by fixed length", bytes_total);
} else {
bytes_total = dev->rx_buffer_size;
dev_dbg(dev->dev, "rx: msg len set to %d as requested by read", bytes_total);
@@ -582,7 +582,7 @@ pi433_tx_thread(void *data)
device->free_in_fifo = FIFO_SIZE;
position = 0;
repetitions = tx_cfg.repetitions;
- while((repetitions > 0) && (size > position)) {
+ while ((repetitions > 0) && (size > position)) {
if ((size - position) > device->free_in_fifo) {
/* msg to big for fifo - take a part */
int temp = device->free_in_fifo;
@@ -590,7 +590,7 @@ pi433_tx_thread(void *data)
rf69_write_fifo(spi,
&buffer[position],
temp);
- position +=temp;
+ position += temp;
} else {
/* msg fits into fifo - take all */
device->free_in_fifo -= size;
@@ -882,7 +882,7 @@ static int setup_GPIOs(struct pi433_device *device)
DIO1_irq_handler
};

- for (i=0; i<NUM_DIO; i++) {
+ for (i = 0; i < NUM_DIO; i++) {
/* "construct" name and get the gpio descriptor */
snprintf(name, sizeof(name), "DIO%d", i);
device->gpiod[i] = gpiod_get(&device->spi->dev, name, 0 /*GPIOD_IN*/);
@@ -898,7 +898,7 @@ static int setup_GPIOs(struct pi433_device *device)
if (IS_ERR(device->gpiod[i])) {
retval = PTR_ERR(device->gpiod[i]);
/* release already allocated gpios */
- for (i--; i>=0; i--) {
+ for (i--; i >= 0; i--) {
free_irq(device->irq_num[i], device);
gpiod_put(device->gpiod[i]);
}
@@ -938,7 +938,7 @@ static void free_GPIOs(struct pi433_device *device)
{
int i;

- for (i=0; i<NUM_DIO; i++) {
+ for (i = 0; i < NUM_DIO; i++) {
/* check if gpiod is valid */
if (IS_ERR(device->gpiod[i]))
continue;
--
2.11.0