Re: intel-gpio interrupts stop firing with Focaltech I2C-HID touchpad

[Mika Westerberg]

On Fri, Nov 17, 2017 at 03:35:18PM +0200, Mika Westerberg wrote:
> > pin 18 (GPIO_18) GPIO 0x40900100 0x00024075

Hmm,

If I decode 0x40900100 correctly PADCFG0_GPIROUTIOXAPIC (BIT 20) flag is
set for the pin. This means the interrupt is routed to IO-APIC instead.

Now, we do clear that flag along with the others when the GPIO is
requested through gpio_request() but in this case we go through irqchip
instead so the flag is not cleared.

I wonder if the following patch changes anything?

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 71df0f70b61f..06af096f5768 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -939,6 +939,10 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned type)
 
 	value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);
 
+	/* Disable SCI/SMI/NMI generation */
+	value &= ~(PADCFG0_GPIROUTIOXAPIC | PADCFG0_GPIROUTSCI);
+	value &= ~(PADCFG0_GPIROUTSMI | PADCFG0_GPIROUTNMI);
+
 	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
 		value |= PADCFG0_RXEVCFG_EDGE_BOTH << PADCFG0_RXEVCFG_SHIFT;
 	} else if (type & IRQ_TYPE_EDGE_FALLING) {