Re: [PATCH V6] clk: qcom: Add spmi_pmic clock divider support

[Rob Herring]

On Fri, Nov 17, 2017 at 03:18:47PM +0530, Tirupathi Reddy wrote:
> Clkdiv module provides a clock output on the PMIC with CXO as
> the source. This clock can be routed through PMIC GPIOs. Add
> a device driver to configure this clkdiv module.
> 
> Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>

Normally your S-o-B would be last.

> ---
>  .../bindings/clock/clk-spmi-pmic-div.txt           |  59 ++++

Please split bindings to a separate patch.

Otherwise,

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>  drivers/clk/qcom/Kconfig                           |   9 +
>  drivers/clk/qcom/Makefile                          |   1 +
>  drivers/clk/qcom/clk-spmi-pmic-div.c               | 308 +++++++++++++++++++++
>  4 files changed, 377 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
>  create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c