[PATCH v5 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe

From: Niklas Cassel
Date: Mon Nov 20 2017 - 08:33:20 EST

Assign pp->ops in *_add_pcie_port() to match how it is done in other
drivers like exynos, imx7, keystone, armada8k, artpec6, designware-plat,
hisi, kirin and spear13xx.

This is probably a remainder since when dev and ops were assigned as
members to pp. Since we now assign them as members to struct dw_pcie,
the pp->ops assignment should definitely be in dra7xx_add_pcie_port().

This is done so that the compiler (in a later commit) can remove more
code when enabling only one of the two supported modes (host/ep) in
the dra7xx driver.

Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
drivers/pci/dwc/pci-dra7xx.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index d330b7d86ce3..07c74ae3614e 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -461,6 +461,8 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
if (!pci->dbi_base)
return -ENOMEM;

+ pp->ops = &dra7xx_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "failed to initialize host\n");
@@ -590,7 +592,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
void __iomem *base;
struct resource *res;
struct dw_pcie *pci;
- struct pcie_port *pp;
struct dra7xx_pcie *dra7xx;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
@@ -618,9 +619,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
pci->dev = dev;
pci->ops = &dw_pcie_ops;

- pp = &pci->pp;
- pp->ops = &dra7xx_pcie_host_ops;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "missing IRQ resource: %d\n", irq);