Re: [PATCH 2/2] serial: 8250_fintek: Disable delays for ports != 0

[Ricardo Ribalda Delgado]

ping?


On Mon, Nov 6, 2017 at 11:49 AM, Ricardo Ribalda Delgado
<ricardo.ribalda@xxxxxxxxx> wrote:
> According to the datasheet, only the first port supports delay before
> send and delay after send.
>
> Reported-by: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_fintek.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
> index ca7e96f9f080..61745d4bea31 100644
> --- a/drivers/tty/serial/8250/8250_fintek.c
> +++ b/drivers/tty/serial/8250/8250_fintek.c
> @@ -216,6 +216,12 @@ static int fintek_8250_rs485_config(struct uart_port *port,
>         rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
>                         SER_RS485_RTS_AFTER_SEND;
>
> +       /* Only the first port supports delays */
> +       if (pdata->index) {
> +               rs485->delay_rts_before_send = 0;
> +               rs485->delay_rts_after_send = 0;
> +       }
> +
>         if (rs485->delay_rts_before_send) {
>                 rs485->delay_rts_before_send = 1;
>                 config |= TXW4C_IRA;
> --
> 2.14.2
>



-- 
Ricardo Ribalda