Re: [e1000_shutdown] e1000 0000:00:03.0: disabling already-disabled device

[Fengguang Wu]

On Wed, Nov 22, 2017 at 03:40:52AM +0530, Tushar Dave wrote:
> On 11/21/2017 06:11 PM, Fengguang Wu wrote:
> > Hello,
> >
> > FYI this happens in mainline kernel 4.14.0-01330-g3c07399.
> > It happens since 4.13 .
> >
> > It occurs in 3 out of 162 boots.
> >
> >
> > [   44.637743] advantechwdt: Unexpected close, not stopping watchdog!
> > [   44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
> > [   45.013419] e1000 0000:00:03.0: disabling already-disabled device
> > [   45.013447] ------------[ cut here ]------------
> > [   45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105:
> > 						pci_disable_device at drivers/pci/pci.c:1640
> > [   45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1
> > [   45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000
> > [   45.017987] RIP: 0010:pci_disable_device+0xa1/0x105:
> > 						pci_disable_device at drivers/pci/pci.c:1640
> > [   45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286
> > [   45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000
> > [   45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203
> > [   45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000
> > [   45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001
> > [   45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f
> > [   45.023842] FS:  0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
> > [   45.024863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [   45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0
> > [   45.026478] Call Trace:
> > [   45.026811]  __e1000_shutdown+0x1d4/0x1e2:
> > 						__e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162
> > [   45.027344]  ? rcu_perf_cleanup+0x2a1/0x2a1:
> > 						rcu_perf_shutdown at kernel/rcu/rcuperf.c:627
> > [   45.027883]  e1000_shutdown+0x14/0x3a:
> > 						e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235
> > [   45.028351]  device_shutdown+0x110/0x1aa:
> > 						device_shutdown at drivers/base/core.c:2807
> > [   45.028858]  kernel_power_off+0x31/0x64:
> > 						kernel_power_off at kernel/reboot.c:260
> > [   45.029343]  rcu_perf_shutdown+0x9b/0xa7:
> > 						rcu_perf_shutdown at kernel/rcu/rcuperf.c:637
> > [   45.029852]  ? __wake_up_common_lock+0xa2/0xa2:
> > 						autoremove_wake_function at kernel/sched/wait.c:376
> > [   45.030414]  kthread+0x126/0x12e:
> > 						kthread at kernel/kthread.c:233
> > [   45.030834]  ? __kthread_bind_mask+0x8e/0x8e:
> > 						kthread at kernel/kthread.c:190
> > [   45.031399]  ? ret_from_fork+0x1f/0x30:
> > 						ret_from_fork at arch/x86/entry/entry_64.S:443
> > [   45.031883]  ? kernel_init+0xa/0xf5:
> > 						kernel_init at init/main.c:997
> > [   45.032325]  ret_from_fork+0x1f/0x30:
> > 						ret_from_fork at arch/x86/entry/entry_64.S:443
> > [   45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82
> > [   45.035222] ---[ end trace c257137b1b1976ef ]---
> > [   45.037838] ACPI: Preparing to enter system sleep state S5
> >
> > Attached the full dmesg, kconfig and reproduce scripts.
> Looks like e1000 pci/pxi-x device is already suspended. And therefore
> call to e1000_suspend() -> __e1000_shutdown() -> pci_disable_device()
> already had disabled the device.
> Disabling device again by e1000_shutdown handler during system shutdown
> causes warning at drivers/pci/pci.c:1641.
>
> I think function __e1000_shutdown should just return if device is
> already suspended!
>
> I don't have e1000 hardware to test right now. So if this seems logical
> to others I will send a patch.

Tushar, it happens on QEMU boot testing, so do not rely on e1000 HW.
Unless you'd like to prevent regressions on real HW.

The original report attached a reproduce script to run the QEMU test.
Or you may send me the patch for testing.

Thanks,
Fengguang