[PATCH 22/43] x86/mm/kaiser: Prepare assembly for entry/exit CR3 switching

From: Ingo Molnar
Date: Fri Nov 24 2017 - 04:21:04 EST

Next message: Ingo Molnar: "[PATCH 23/43] x86/mm/kaiser: Introduce user-mapped per-cpu areas"
Previous message: Ingo Molnar: "[PATCH 42/43] x86/mm/kaiser: Allow KAISER to be enabled/disabled at runtime"
In reply to: Ingo Molnar: "[PATCH 42/43] x86/mm/kaiser: Allow KAISER to be enabled/disabled at runtime"
Next in thread: Peter Zijlstra: "Re: [PATCH 22/43] x86/mm/kaiser: Prepare assembly for entry/exit CR3 switching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>

This is largely code from Andy Lutomirski. I fixed a few bugs
in it, and added a few SWITCH_TO_* spots.

KAISER needs to switch to a different CR3 value when it enters
the kernel and switch back when it exits. This essentially
needs to be done before leaving assembly code.

This is extra challenging because the switching context is
tricky: the registers that can be clobbered can vary. It is also
hard to store things on the stack because there is an established
ABI (ptregs) or the stack is entirely unsafe to use.

This patch establishes a set of macros that allow changing to
the user and kernel CR3 values.

Interactions with SWAPGS: previous versions of the KAISER code
relied on having per-cpu scratch space to save/restore a register
that can be used for the CR3 MOV. The %GS register is used to
index into our per-cpu space, so SWAPGS *had* to be done before
the CR3 switch. That scratch space is gone now, but the semantic
that SWAPGS must be done before the CR3 MOV is retained. This is
good to keep because it is not that hard to do and it allows us
to do things like add per-cpu debugging information to help us
figure out what goes wrong sometimes.

What this does in the NMI code is worth pointing out. NMIs
can interrupt *any* context and they can also be nested with
NMIs interrupting other NMIs. The comments below
".Lnmi_from_kernel" explain the format of the stack during this
situation. Changing the format of this stack is not a fun
exercise: I tried. Instead of storing the old CR3 value on the
stack, this patch depend on the *regular* register save/restore
mechanism and then uses %r14 to keep CR3 during the NMI. It is
callee-saved and will not be clobbered by the C NMI handlers that
get called.

Signed-off-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Daniel Gruss <daniel.gruss@xxxxxxxxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Hugh Dickins <hughd@xxxxxxxxxx>
Cc: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Michael Schwarz <michael.schwarz@xxxxxxxxxxxxxx>
Cc: Moritz Lipp <moritz.lipp@xxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Richard Fellner <richard.fellner@xxxxxxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-mm@xxxxxxxxx
Link: http://lkml.kernel.org/r/20171123003442.2D047A7D@xxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
arch/x86/entry/calling.h | 65 ++++++++++++++++++++++++++++++++++++++++
arch/x86/entry/entry_64.S | 44 +++++++++++++++++++++++++--
arch/x86/entry/entry_64_compat.S | 32 +++++++++++++++++++-
3 files changed, 137 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 3fd8bc560fae..e1650da01323 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/jump_label.h>
#include <asm/unwind_hints.h>
+#include <asm/cpufeatures.h>

/*

@@ -187,6 +188,70 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm

+#ifdef CONFIG_KAISER
+
+/* KAISER PGDs are 8k. Flip bit 12 to switch between the two halves: */
+#define KAISER_SWITCH_MASK (1<<PAGE_SHIFT)
+
+.macro ADJUST_KERNEL_CR3 reg:req
+ /* Clear "KAISER bit", point CR3 at kernel pagetables: */
+ andq $(~KAISER_SWITCH_MASK), \reg
+.endm
+
+.macro ADJUST_USER_CR3 reg:req
+ /* Move CR3 up a page to the user page tables: */
+ orq $(KAISER_SWITCH_MASK), \reg
+.endm
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+ mov %cr3, \scratch_reg
+ ADJUST_KERNEL_CR3 \scratch_reg
+ mov \scratch_reg, %cr3
+.endm
+
+.macro SWITCH_TO_USER_CR3 scratch_reg:req
+ mov %cr3, \scratch_reg
+ ADJUST_USER_CR3 \scratch_reg
+ mov \scratch_reg, %cr3
+.endm
+
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+ movq %cr3, %r\scratch_reg
+ movq %r\scratch_reg, \save_reg
+ /*
+ * Is the switch bit zero? This means the address is
+ * up in real KAISER patches in a moment.
+ */
+ testq $(KAISER_SWITCH_MASK), %r\scratch_reg
+ jz .Ldone_\@
+
+ ADJUST_KERNEL_CR3 %r\scratch_reg
+ movq %r\scratch_reg, %cr3
+
+.Ldone_\@:
+.endm
+
+.macro RESTORE_CR3 save_reg:req
+ /*
+ * The CR3 write could be avoided when not changing its value,
+ * but would require a CR3 read *and* a scratch register.
+ */
+ movq \save_reg, %cr3
+.endm
+
+#else /* CONFIG_KAISER=n: */
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+.endm
+.macro SWITCH_TO_USER_CR3 scratch_reg:req
+.endm
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+.endm
+.macro RESTORE_CR3 save_reg:req
+.endm
+
+#endif
+
#endif /* CONFIG_X86_64 */

/*
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 34e3110b0876..07ed55e9e35a 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -168,6 +168,9 @@ ENTRY(entry_SYSCALL_64_trampoline)
/* Stash the user RSP. */
movq %rsp, RSP_SCRATCH

+ /* Note: using %rsp as a scratch reg. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
/* Load the top of the task stack into RSP */
movq CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp

@@ -198,6 +201,15 @@ ENTRY(entry_SYSCALL_64)

swapgs
movq %rsp, PER_CPU_VAR(rsp_scratch)
+
+ /*
+ * The kernel CR3 is needed to map the process stack, but we
+ * need a scratch register to be able to load CR3. %rsp is
+ * clobberable right now, so use it as a scratch register.
+ * %rsp will be look crazy here for a couple instructions.
+ */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp

/* Construct struct pt_regs on stack */
@@ -247,6 +259,9 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
movq %r10, %rcx

+ /* Must wait until we have the kernel CR3 to call C functions: */
+ TRACE_IRQS_OFF
+
/*
* This call instruction is handled specially in stub_ptregs_64.
* It might end up jumping to the slow path. If it jumps, RAX
@@ -393,6 +408,7 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
* We are on the trampoline stack. All regs except RDI are live.
* We can do future final exit work right here.
*/
+ SWITCH_TO_USER_CR3 scratch_reg=%rdi

popq %rdi
popq %rsp
@@ -729,6 +745,8 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode)
* We can do future final exit work right here.
*/

+ SWITCH_TO_USER_CR3 scratch_reg=%rdi
+
/* Restore RDI. */
popq %rdi
SWAPGS
@@ -937,6 +955,9 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
ENTRY(switch_to_thread_stack)
UNWIND_HINT_FUNC

+ /* Need to switch before accessing the thread stack. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
+
pushq %rdi
movq %rsp, %rdi
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
@@ -1239,7 +1260,11 @@ ENTRY(paranoid_entry)
js 1f /* negative -> in kernel */
SWAPGS
xorl %ebx, %ebx
-1: ret
+
+1:
+ SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=ax save_reg=%r14
+
+ ret
END(paranoid_entry)

/*
@@ -1261,6 +1286,7 @@ ENTRY(paranoid_exit)
testl %ebx, %ebx /* swapgs needed? */
jnz .Lparanoid_exit_no_swapgs
TRACE_IRQS_IRETQ
+ RESTORE_CR3 %r14
SWAPGS_UNSAFE_STACK
jmp .Lparanoid_exit_restore
.Lparanoid_exit_no_swapgs:
@@ -1289,6 +1315,9 @@ ENTRY(error_entry)
*/
SWAPGS

+ /* We have user CR3. Change to kernel CR3. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
+
.Lerror_entry_from_usermode_after_swapgs:
/* Put us onto the real thread stack. */
popq %r12 /* save return addr in %12 */
@@ -1333,6 +1362,7 @@ ENTRY(error_entry)
* gsbase and proceed. We'll fix up the exception and land in
* .Lgs_change's error handler with kernel gsbase.
*/
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
SWAPGS
jmp .Lerror_entry_done

@@ -1343,9 +1373,10 @@ ENTRY(error_entry)

.Lerror_bad_iret:
/*
- * We came from an IRET to user mode, so we have user gsbase.
- * Switch to kernel gsbase:
+ * We came from an IRET to user mode, so we have user
+ * gsbase and CR3. Switch to kernel gsbase and CR3:
*/
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
SWAPGS

/*
@@ -1378,6 +1409,10 @@ END(error_exit)
/*
* Runs on exception stack. Xen PV does not go through this path at all,
* so we can use real assembly here.
+ *
+ * Registers:
+ * %r14: Used to save/restore the CR3 of the interrupted context
+ * when KAISER is in use. Do not clobber.
*/
ENTRY(nmi)
UNWIND_HINT_IRET_REGS
@@ -1441,6 +1476,7 @@ ENTRY(nmi)

swapgs
cld
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx
movq %rsp, %rdx
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
UNWIND_HINT_IRET_REGS base=%rdx offset=8
@@ -1693,6 +1729,8 @@ ENTRY(nmi)
movq $-1, %rsi
call do_nmi

+ RESTORE_CR3 save_reg=%r14
+
testl %ebx, %ebx /* swapgs needed? */
jnz nmi_restore
nmi_swapgs:
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 95ad40eb7eff..57cd353c0667 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -49,6 +49,10 @@
ENTRY(entry_SYSENTER_compat)
/* Interrupts are off on entry. */
SWAPGS
+
+ /* We are about to clobber %rsp anyway, clobbering here is OK */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp

/*
@@ -215,6 +219,12 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe)
pushq $0 /* pt_regs->r14 = 0 */
pushq $0 /* pt_regs->r15 = 0 */

+ /*
+ * We just saved %rdi so it is safe to clobber. It is not
+ * preserved during the C calls inside TRACE_IRQS_OFF anyway.
+ */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
+
/*
* User mode is traced as though IRQs are on, and SYSENTER
* turned them off.
@@ -256,10 +266,22 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe)
* when the system call started, which is already known to user
* code. We zero R8-R10 to avoid info leaks.
*/
+ movq RSP-ORIG_RAX(%rsp), %rsp
+
+ /*
+ * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored
+ * on the process stack which is not mapped to userspace and
+ * not readable after we SWITCH_TO_USER_CR3. Delay the CR3
+ * switch until after after the last reference to the process
+ * stack.
+ *
+ * %r8 is zeroed before the sysret, thus safe to clobber.
+ */
+ SWITCH_TO_USER_CR3 scratch_reg=%r8
+
xorq %r8, %r8
xorq %r9, %r9
xorq %r10, %r10
- movq RSP-ORIG_RAX(%rsp), %rsp
swapgs
sysretl
END(entry_SYSCALL_compat)
@@ -297,6 +319,14 @@ ENTRY(entry_INT80_compat)
ASM_CLAC /* Do this early to minimize exposure */
SWAPGS

+ /*
+ * Must switch CR3 before thread stack is used. %r8 itself
+ * is not saved into pt_regs and is not preserved across
+ * function calls (like TRACE_IRQS_OFF calls), thus should
+ * be safe to use.
+ */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%r8
+
/*
* User tracing code (ptrace or signal handlers) might assume that
* the saved RAX contains a 32-bit number when we're invoking a 32-bit
--
2.14.1

Next message: Ingo Molnar: "[PATCH 23/43] x86/mm/kaiser: Introduce user-mapped per-cpu areas"
Previous message: Ingo Molnar: "[PATCH 42/43] x86/mm/kaiser: Allow KAISER to be enabled/disabled at runtime"
In reply to: Ingo Molnar: "[PATCH 42/43] x86/mm/kaiser: Allow KAISER to be enabled/disabled at runtime"
Next in thread: Peter Zijlstra: "Re: [PATCH 22/43] x86/mm/kaiser: Prepare assembly for entry/exit CR3 switching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]