[PATCH 42/43] x86/mm/kaiser: Allow KAISER to be enabled/disabled at runtime

[Ingo Molnar]

From: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>

The KAISER CR3 switches are expensive for many reasons.  Not all systems
benefit from the protection provided by KAISER.  Some of them can not
pay the high performance cost.

This patch adds a debugfs file.  To disable KAISER, you do:

	echo 0 > /sys/kernel/debug/x86/kaiser-enabled

and to re-enable it, you can:

	echo 1 > /sys/kernel/debug/x86/kaiser-enabled

This is a *minimal* implementation.  There are certainly plenty of
optimizations that can be done on top of this by using ALTERNATIVES
among other things.

This does, however, completely remove all the KAISER-based CR3 writes.
This permits a paravirtualized system that can not tolerate CR3
writes to theoretically survive with CONFIG_KAISER=y, albeit with
/sys/kernel/debug/x86/kaiser-enabled=0.

Signed-off-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: daniel.gruss@xxxxxxxxxxxxxx
Cc: hughd@xxxxxxxxxx
Cc: keescook@xxxxxxxxxx
Cc: linux-mm@xxxxxxxxx
Cc: luto@xxxxxxxxxx
Cc: michael.schwarz@xxxxxxxxxxxxxx
Cc: moritz.lipp@xxxxxxxxxxxxxx
Cc: richard.fellner@xxxxxxxxxxxxxxxxx
Link: https://lkml.kernel.org/r/20171123003523.28FFBAB6@xxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/entry/calling.h | 12 +++++++++
 arch/x86/mm/kaiser.c     | 70 +++++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 78 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 66af80514197..89ccf7ae0e23 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -209,19 +209,29 @@ For 32-bit we have the following conventions - kernel is built with
 	orq     $(KAISER_SWITCH_MASK), \reg
 .endm
 
+.macro JUMP_IF_KAISER_OFF	label
+	testq   $1, kaiser_asm_do_switch
+	jz      \label
+.endm
+
 .macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+	JUMP_IF_KAISER_OFF	.Lswitch_done_\@
 	mov	%cr3, \scratch_reg
 	ADJUST_KERNEL_CR3 \scratch_reg
 	mov	\scratch_reg, %cr3
+.Lswitch_done_\@:
 .endm
 
 .macro SWITCH_TO_USER_CR3 scratch_reg:req
+	JUMP_IF_KAISER_OFF	.Lswitch_done_\@
 	mov	%cr3, \scratch_reg
 	ADJUST_USER_CR3 \scratch_reg
 	mov	\scratch_reg, %cr3
+.Lswitch_done_\@:
 .endm
 
 .macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+	JUMP_IF_KAISER_OFF	.Ldone_\@
 	movq	%cr3, %r\scratch_reg
 	movq	%r\scratch_reg, \save_reg
 	/*
@@ -244,11 +254,13 @@ For 32-bit we have the following conventions - kernel is built with
 .endm
 
 .macro RESTORE_CR3 save_reg:req
+	JUMP_IF_KAISER_OFF	.Ldone_\@
 	/*
 	 * The CR3 write could be avoided when not changing its value,
 	 * but would require a CR3 read *and* a scratch register.
 	 */
 	movq	\save_reg, %cr3
+.Ldone_\@:
 .endm
 
 #else /* CONFIG_KAISER=n: */
diff --git a/arch/x86/mm/kaiser.c b/arch/x86/mm/kaiser.c
index 06966b111280..1eb27b410556 100644
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -43,6 +43,9 @@
 
 #define KAISER_WALK_ATOMIC  0x1
 
+__aligned(PAGE_SIZE)
+unsigned long kaiser_asm_do_switch[PAGE_SIZE/sizeof(unsigned long)] = { 1 };
+
 /*
  * At runtime, the only things we map are some things for CPU
  * hotplug, and stacks for new processes.  No two CPUs will ever
@@ -395,6 +398,9 @@ void __init kaiser_init(void)
 
 	kaiser_init_all_pgds();
 
+	kaiser_add_user_map_early(&kaiser_asm_do_switch, PAGE_SIZE,
+				  __PAGE_KERNEL | _PAGE_GLOBAL);
+
 	for_each_possible_cpu(cpu) {
 		void *percpu_vaddr = __per_cpu_user_mapped_start +
 				     per_cpu_offset(cpu);
@@ -483,6 +489,56 @@ static ssize_t kaiser_enabled_read_file(struct file *file, char __user *user_buf
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
 
+enum poison {
+	KAISER_POISON,
+	KAISER_UNPOISON
+};
+void kaiser_poison_pgds(enum poison do_poison);
+
+void kaiser_do_disable(void)
+{
+	/* Make sure the kernel PGDs are usable by userspace: */
+	kaiser_poison_pgds(KAISER_UNPOISON);
+
+	/*
+	 * Make sure all the CPUs have the poison clear in their TLBs.
+	 * This also functions as a barrier to ensure that everyone
+	 * sees the unpoisoned PGDs.
+	 */
+	flush_tlb_all();
+
+	/* Tell the assembly code to stop switching CR3. */
+	kaiser_asm_do_switch[0] = 0;
+
+	/*
+	 * Make sure everybody does an interrupt.  This means that
+	 * they have gone through a SWITCH_TO_KERNEL_CR3 amd are no
+	 * longer running on the userspace CR3.  If we did not do
+	 * this, we might have CPUs running on the shadow page tables
+	 * that then enter the kernel and think they do *not* need to
+	 * switch.
+	 */
+	flush_tlb_all();
+}
+
+void kaiser_do_enable(void)
+{
+	/* Tell the assembly code to start switching CR3: */
+	kaiser_asm_do_switch[0] = 1;
+
+	/* Make sure everyone can see the kaiser_asm_do_switch update: */
+	synchronize_rcu();
+
+	/*
+	 * Now that userspace is no longer using the kernel copy of
+	 * the page tables, we can poison it:
+	 */
+	kaiser_poison_pgds(KAISER_POISON);
+
+	/* Make sure all the CPUs see the poison: */
+	flush_tlb_all();
+}
+
 static ssize_t kaiser_enabled_write_file(struct file *file,
 		 const char __user *user_buf, size_t count, loff_t *ppos)
 {
@@ -504,7 +560,17 @@ static ssize_t kaiser_enabled_write_file(struct file *file,
 	if (kaiser_enabled == enable)
 		return count;
 
+	/*
+	 * This tells the page table code to stop poisoning PGDs
+	 */
 	WRITE_ONCE(kaiser_enabled, enable);
+	synchronize_rcu();
+
+	if (enable)
+		kaiser_do_enable();
+	else
+		kaiser_do_disable();
+
 	return count;
 }
 
@@ -522,10 +588,6 @@ static int __init create_kaiser_enabled(void)
 }
 late_initcall(create_kaiser_enabled);
 
-enum poison {
-	KAISER_POISON,
-	KAISER_UNPOISON
-};
 void kaiser_poison_pgd_page(pgd_t *pgd_page, enum poison do_poison)
 {
 	int i = 0;
-- 
2.14.1