[PATCH v2] staging: sm750b: Fix coding style issues in sm750_accel.c
From: Jeremy Lacomis
Date: Sat Nov 25 2017 - 17:49:04 EST
This is a patch to sm750_accel.c that fixes 80-character line length
warnings found by checkpatch.pl. It also fixes some grammatical errors
in comments and moves parameter-specific comments from inline to before
the function.
Signed-off-by: Jeremy Lacomis <j.lacomis@xxxxxxxxx>
---
Changes in v2:
- Change function comments to the kernel-doc format
drivers/staging/sm750fb/sm750_accel.c | 189 ++++++++++++++++++----------------
1 file changed, 103 insertions(+), 86 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 1035e91e7cd3..42cd920111bf 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -68,11 +68,10 @@ void sm750_hw_de_init(struct lynx_accel *accel)
}
/*
- * set2dformat only be called from setmode functions
- * but if you need dual framebuffer driver,need call set2dformat
- * every time you use 2d function
+ * set2dformat can only be called from setmode functions, but if you need a dual
+ * framebuffer driver, set2dformat must be called every time a 2D function is
+ * used
*/
-
void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt)
{
u32 reg;
@@ -94,7 +93,7 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
if (accel->de_wait() != 0) {
/*
- * int time wait and always busy,seems hardware
+ * int time wait and always busy, seems hardware
* got something error
*/
pr_debug("De engine always busy\n");
@@ -130,80 +129,88 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
return 0;
}
-int sm750_hw_copyarea(
-struct lynx_accel *accel,
-unsigned int sBase, /* Address of source: offset in frame buffer */
-unsigned int sPitch, /* Pitch value of source surface in BYTE */
-unsigned int sx,
-unsigned int sy, /* Starting coordinate of source surface */
-unsigned int dBase, /* Address of destination: offset in frame buffer */
-unsigned int dPitch, /* Pitch value of destination surface in BYTE */
-unsigned int Bpp, /* Color depth of destination surface */
-unsigned int dx,
-unsigned int dy, /* Starting coordinate of destination surface */
-unsigned int width,
-unsigned int height, /* width and height of rectangle in pixel value */
-unsigned int rop2) /* ROP value */
+/**
+ * sm750_hw_copyarea()
+ * @sBase: Address of the source offset in the frame buffer
+ * @sPitch: Pitch value of the source surface in BYTE
+ * @sx: Starting x-coordinate of the source surface
+ * @sy: Starting y-coordinate of the source surface
+ * @dBase: Address of the destination offset in the frame buffer
+ * @dPitch: Pitch value of the destination surface in BYTE
+ * @Bpp: Color depth of the destination surface
+ * @dx: Starting x-coordinate of the destination surface
+ * @dy: Starting y-coordinate of the destination surface
+ * @width: Width of the rectangle in pixels
+ * @height: Height of the rectangle in pixels
+ * @rop2: ROP value
+ */
+int sm750_hw_copyarea(struct lynx_accel *accel, unsigned int sBase,
+ unsigned int sPitch, unsigned int sx, unsigned int sy,
+ unsigned int dBase, unsigned int dPitch, unsigned int Bpp,
+ unsigned int dx, unsigned int dy, unsigned int width,
+ unsigned int height, unsigned int rop2)
{
unsigned int nDirection, de_ctrl;
nDirection = LEFT_TO_RIGHT;
- /* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
+ /*
+ * Direction of ROP2 operation:
+ * 1 = Left to Right
+ * -1 = Right to Left
+ */
de_ctrl = 0;
- /* If source and destination are the same surface, need to check for overlay cases */
+ /*
+ * If the source and destination are the same surface, need to check for
+ * overlay cases
+ */
if (sBase == dBase && sPitch == dPitch) {
/* Determine direction of operation */
- if (sy < dy) {
- /* +----------+
- * |S |
- * | +----------+
- * | | | |
- * | | | |
- * +---|------+ |
- * | D|
- * +----------+
- */
+ /* +----------+
+ * |S |
+ * | +----------+
+ * | | | |
+ * | | | |
+ * +---|------+ |
+ * | D|
+ * +----------+
+ */
+ if (sy < dy) {
nDirection = BOTTOM_TO_TOP;
- } else if (sy > dy) {
- /* +----------+
- * |D |
- * | +----------+
- * | | | |
- * | | | |
- * +---|------+ |
- * | S|
- * +----------+
- */
+ /* +----------+
+ * |D |
+ * | +----------+
+ * | | | |
+ * | | | |
+ * +---|------+ |
+ * | S|
+ * +----------+
+ */
+ } else if (sy > dy) {
nDirection = TOP_TO_BOTTOM;
- } else {
- /* sy == dy */
-
- if (sx <= dx) {
- /* +------+---+------+
- * |S | | D|
- * | | | |
- * | | | |
- * | | | |
- * +------+---+------+
- */
+ } else {
+ /* +------+---+------+
+ * |S | | D|
+ * | | | |
+ * | | | |
+ * | | | |
+ * +------+---+------+
+ */
+ if (sx <= dx)
nDirection = RIGHT_TO_LEFT;
- } else {
- /* sx > dx */
-
- /* +------+---+------+
- * |D | | S|
- * | | | |
- * | | | |
- * | | | |
- * +------+---+------+
- */
+ /* +------+---+------+
+ * |D | | S|
+ * | | | |
+ * | | | |
+ * | | | |
+ * +------+---+------+
+ */
+ else
nDirection = LEFT_TO_RIGHT;
- }
}
}
@@ -288,20 +295,28 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
return de_ctrl;
}
-int sm750_hw_imageblit(struct lynx_accel *accel,
- const char *pSrcbuf, /* pointer to start of source buffer in system memory */
- u32 srcDelta, /* Pitch value (in bytes) of the source buffer, +ive means top down and -ive mean button up */
- u32 startBit, /* Mono data can start at any bit in a byte, this value should be 0 to 7 */
- u32 dBase, /* Address of destination: offset in frame buffer */
- u32 dPitch, /* Pitch value of destination surface in BYTE */
- u32 bytePerPixel, /* Color depth of destination surface */
- u32 dx,
- u32 dy, /* Starting coordinate of destination surface */
- u32 width,
- u32 height, /* width and height of rectangle in pixel value */
- u32 fColor, /* Foreground color (corresponding to a 1 in the monochrome data */
- u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
- u32 rop2) /* ROP value */
+/**
+ * sm750_hw_imageblit()
+ * @pSrcbuf: Start of the source buffer in system memory
+ * @srcDelta: Pitch value of the source buffer in bytes. A positive value means
+ * top-down, while a negative value means bottom-up
+ * @startBit: Mono data can start at any bit in a byte, this value should be in
+ * the range 0-7
+ * @dBase: Address of the destination offset in the frame buffer
+ * @dPitch: Pitch value of the destination surface in BYTE
+ * @bytePerPixel: Color depth of the destination surface
+ * @dx: Starting x-coordinate of the destination surface
+ * @dy: Starting y-coordinate of the destination surface
+ * @width: Width of the rectangle in pixels
+ * @height: Height of the rectangle in pixels
+ * @fColor: Foreground color (cooresponding to a 1 in monochrome data)
+ * @bColor: Background color (corresponding to a 0 in monochrome data)
+ * @rop2: ROP value
+ */
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
+ u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+ u32 bytePerPixel, u32 dx, u32 dy, u32 width, u32 height,
+ u32 fColor, u32 bColor, u32 rop2)
{
unsigned int ulBytesPerScan;
unsigned int ul4BytesPerScan;
@@ -310,7 +325,8 @@ int sm750_hw_imageblit(struct lynx_accel *accel,
unsigned char ajRemain[4];
int i, j;
- startBit &= 7; /* Just make sure the start bit is within legal range */
+ /* Make sure that the start bit is within legal range */
+ startBit &= 7;
ulBytesPerScan = (width + startBit + 7) / 8;
ul4BytesPerScan = ulBytesPerScan & ~3;
ulBytesRemain = ulBytesPerScan & 3;
@@ -324,9 +340,9 @@ int sm750_hw_imageblit(struct lynx_accel *accel,
*/
write_dpr(accel, DE_WINDOW_SOURCE_BASE, 0);
- /* 2D Destination Base.
- * It is an address offset (128 bit aligned)
- * from the beginning of frame buffer.
+ /*
+ * 2D Destination Base.
+ * 128 bit aligned offset from the beginning of frame buffer.
*/
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
@@ -352,8 +368,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel,
/*
* Note: For 2D Source in Host Write, only X_K1_MONO field is needed,
- * and Y_K2 field is not used.
- * For mono bitmap, use startBit for X_K1.
+ * and Y_K2 field is not used. For mono bitmap, use startBit for X_K1.
*/
write_dpr(accel, DE_SOURCE,
(startBit << DE_SOURCE_X_K1_SHIFT) &
@@ -380,10 +395,12 @@ int sm750_hw_imageblit(struct lynx_accel *accel,
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
for (j = 0; j < (ul4BytesPerScan / 4); j++)
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ write_dpPort(accel,
+ *(unsigned int *)(pSrcbuf + (j * 4)));
if (ulBytesRemain) {
- memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
+ memcpy(ajRemain, pSrcbuf + ul4BytesPerScan,
+ ulBytesRemain);
write_dpPort(accel, *(unsigned int *)ajRemain);
}
--
2.11.0