Re: [RFC][PATCH] drm: adv7511/33: Fix adv7511_cec_init() failure handling

[Archit Taneja]

Hi,

On 11/17/2017 04:29 AM, John Stultz wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
>
> An otherwise correct cleanup patch from Dan Carpenter turned a broken
> failure handling from a feature patch by Hans Verkuil into a kernel
> Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking
> for IS_ERR() instead of NULL") rather than 3b1b975003e4 ("drm:
> adv7511/33: add HDMI CEC support").
>
> I've managed to piece together several partial problems, though
> I'm still struggling with the bigger picture:
>
> adv7511_probe() registers a drm_bridge structure that was allocated
> with devm_kzalloc(). It calls adv7511_cec_init(), which fails for an
> unknown reason, which in turn triggers the registered structure to be
> removed.
>
> Elsewhere, kirin_drm_platform_probe() gets called, which calls
> of_graph_get_remote_node(), and that returns NULL. Before Dan's
> patch we would go on with a NULL pointer here and register that,
> now kirin_drm_platform_probe() fails with -ENODEV.
>
> In a third driver, dsi_parse_dt() calls drm_of_find_panel_or_bridge(),
> which after not finding a panel goes on to call of_drm_find_bridge(),
> and that crashes due to the earlier list corruption.
>
> This addresses the first issue by making sure that adv7511_probe()
> does not completely fail when the adv7511_cec_init() function fails,
> and instead we just disable the CEC feature. This avoids having the
> driver entirely fail to load if just the CEC initialization fails.
>
> Reported-by: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
> Cc: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
> Cc: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx>
> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
> Link: https://bugs.linaro.org/show_bug.cgi?id=3345
> Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551
> Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL")
> Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> [jstultz: Reworked so when adv7511_cec_init() fails, we disable the feature instead
> of disabling the entire driver, which causes graphics to not funciton]
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> ---
> Just wanted to send out my rework of Arnd's patch here.
> Feedback would be welcome.
>
> thanks
> -john
>
>   drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 0e14f15..939c3b9 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1203,12 +1203,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>   
>   #ifdef CONFIG_DRM_I2C_ADV7511_CEC
>   	ret = adv7511_cec_init(dev, adv7511, offset);
> -	if (ret)
> -		goto err_unregister_cec;
>   #else
> -	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
> -		     ADV7511_CEC_CTRL_POWER_DOWN);
> +	ret = 1;
>   #endif
> +	if (ret)
> +		regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
> +			     ADV7511_CEC_CTRL_POWER_DOWN);

This would force CEC to be powered off even if adv7511_cec_init() returned 0, right?
We wouldn't want that if we want to use CEC on a platform that supports it.

Do we know why the call to adv7511_cec_init() is failing on the Hikey board? If it's
because there isn't a "cec" clock specified in DT, it's not really a fatal error, it
just means that the platform hasn't been set up to support CEC. In that case, we
should just power down the CEC block. So, if adv7511_cec_init() would return a
-ENOENT, which we could use as a hint to power down CEC. So, maybe something like this?:

#ifdef CONFIG_DRM_I2C_ADV7511_CEC
        ret = adv7511_cec_init(dev, adv7511, offset);
        if (ret && ret != -ENOENT)	
		goto err_unregister_cec;
#endif
	if (ret)
            regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
                        ADV7511_CEC_CTRL_POWER_DOWN);

Apart from this, we should also move adv7511_cec_init() up in the probe so that
it's called before the drm_bridge is registered.

Thanks,
Archit

>   
>   	return 0;
>   

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project