[PATCH 1/4] dt-bindings: pinctrl: add bindings for MediaTek MT7622 SoC

From: sean.wang
Date: Mon Nov 27 2017 - 22:50:56 EST

From: Sean Wang <sean.wang@xxxxxxxxxxxx>

Add devicetree bindings for MediaTek MT7622 pinctrl driver.

Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
.../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 330 +++++++++++++++++++++
1 file changed, 330 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
new file mode 100644
index 0000000..ce86d45
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
@@ -0,0 +1,330 @@
+== MediaTek MT7622 pinctrl controller ==
+
+Required properties for the root node:
+ - compatible: Should be one of the following
+ "mediatek,mt7622-pinctrl" for MT7622 SoC
+ - reg: offset and length of the pinctrl space
+
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and the
+ second is the GPIO flags.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+MT7622 pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+We support 2 types of configuration nodes. Those nodes can be either pinmux
+nodes or pinconf nodes. Each configuration node can consist of multiple nodes
+describing the pinmux and pinconf options.
+
+The name of each subnode is no matter as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+== pinmux nodes content ==
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required properties are:
+ - groups: An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+ - function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+== pinconf nodes content ==
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+
+Required properties are:
+ - pins: An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+ - groups: An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+
+Optional properies are:
+ bias-disable, bias-pull, bias-pull-down, input-enable,
+ input-schmitt-enable, input-schmitt-disable, output-enable
+ output-low, output-high, drive-strength, slew-rate
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and
+ fast respectively.
+ Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
+
+The following specific properties as defined are valid to specify in a pinconf
+subnode:
+
+Optional properties are:
+ - mediatek,tdsel: Valid arguments are from 0 to 15
+ - mediatek,rdsel: Valid arguments are from 0 to 63
+
+== Valid values for pins, function and groups on MT7622 ==
+
+Valid values for pins are:
+pins can be referenced via the pin names as the below table shown and the
+related physical number is also put ahead of those names which helps cross
+references to pins between groups to know whether pins assignment conflict
+happens among devices try to acquire those available pins.
+
+ Pin #: Valid values for pins
+ -----------------------------
+ PIN 0: "GPIO_A"
+ PIN 1: "I2S1_IN"
+ PIN 2: "I2S1_OUT"
+ PIN 3: "I2S_BCLK"
+ PIN 4: "I2S_WS"
+ PIN 5: "I2S_MCLK"
+ PIN 6: "TXD0"
+ PIN 7: "RXD0"
+ PIN 8: "SPI_WP"
+ PIN 9: "SPI_HOLD"
+ PIN 10: "SPI_CLK"
+ PIN 11: "SPI_MOSI"
+ PIN 12: "SPI_MISO"
+ PIN 13: "SPI_CS"
+ PIN 14: "SPI_SDA"
+ PIN 15: "SPI_SCL"
+ PIN 16: "I2S2_IN"
+ PIN 17: "I2S3_IN"
+ PIN 18: "I2S4_IN"
+ PIN 19: "I2S2_OUT"
+ PIN 20: "I2S3_OUT"
+ PIN 21: "I2S4_OUT"
+ PIN 22: "GPIO_B"
+ PIN 23: "MDC"
+ PIN 24: "MDIO"
+ PIN 25: "G2_TXD0"
+ PIN 26: "G2_TXD1"
+ PIN 27: "G2_TXD2"
+ PIN 28: "G2_TXD3"
+ PIN 29: "G2_TXEN"
+ PIN 30: "G2_TXC"
+ PIN 31: "G2_RXD0"
+ PIN 32: "G2_RXD1"
+ PIN 33: "G2_RXD2"
+ PIN 34: "G2_RXD3"
+ PIN 35: "G2_RXDV"
+ PIN 36: "G2_RXC"
+ PIN 37: "NCEB"
+ PIN 38: "NWEB"
+ PIN 39: "NREB"
+ PIN 40: "NDL4"
+ PIN 41: "NDL5"
+ PIN 42: "NDL6"
+ PIN 43: "NDL7"
+ PIN 44: "NRB"
+ PIN 45: "NCLE"
+ PIN 46: "NALE"
+ PIN 47: "NDL0"
+ PIN 48: "NDL1"
+ PIN 49: "NDL2"
+ PIN 50: "NDL3"
+ PIN 51: "MDI_TP_P0"
+ PIN 52: "MDI_TN_P0"
+ PIN 53: "MDI_RP_P0"
+ PIN 54: "MDI_RN_P0"
+ PIN 55: "MDI_TP_P1"
+ PIN 56: "MDI_TN_P1"
+ PIN 57: "MDI_RP_P1"
+ PIN 58: "MDI_RN_P1"
+ PIN 59: "MDI_RP_P2"
+ PIN 60: "MDI_RN_P2"
+ PIN 61: "MDI_TP_P2"
+ PIN 62: "MDI_TN_P2"
+ PIN 63: "MDI_TP_P3"
+ PIN 64: "MDI_TN_P3"
+ PIN 65: "MDI_RP_P3"
+ PIN 66: "MDI_RN_P3"
+ PIN 67: "MDI_RP_P4"
+ PIN 68: "MDI_RN_P4"
+ PIN 69: "MDI_TP_P4"
+ PIN 70: "MDI_TN_P4"
+ PIN 71: "SPI2_CK"
+ PIN 72: "SPI2_DATA"
+ PIN 73: "SPIC1_CLK"
+ PIN 74: "SPIC1_MOSI"
+ PIN 75: "SPIC1_MISO"
+ PIN 76: "SPIC1_CS"
+ PIN 77: "GPIO_D"
+ PIN 78: "WATCHDOG"
+ PIN 79: "RTS3_N"
+ PIN 80: "CTS3_N"
+ PIN 81: "TXD3"
+ PIN 82: "RXD3"
+ PIN 83: "PERST0_N"
+ PIN 84: "PERST1_N"
+ PIN 85: "WLED_N"
+ PIN 86: "EPHY_LED0_N"
+ PIN 87: "AUXIN0"
+ PIN 88: "AUXIN1"
+ PIN 89: "AUXIN2"
+ PIN 90: "AUXIN3"
+ PIN 91: "TXD4"
+ PIN 92: "RXD4"
+ PIN 93: "RTS4_IN"
+ PIN 94: "CST4_IN"
+ PIN 95: "PWM1"
+ PIN 96: "PWM2"
+ PIN 97: "PWM3"
+ PIN 98: "PWM4"
+ PIN 99: "PWM5"
+ PIN 100: "PWM6"
+ PIN 101: "PWM7"
+ PIN 102: "GPIO_E"
+
+Valid values for function are:
+ "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
+ "pwm", "sd", "spi", "tdm", "uart"
+
+Valid values for groups are:
+additional data is put followingly with valid value allowing us to know which
+applicable function and which relevant pins (in pin#) are able applied for that
+group.
+
+ Valid value function pins (in pin#)
+ -------------------------------------------------------------------------
+ "emmc" "emmc" 40, 41, 42, 43, 44, 45,
+ 47, 48, 49, 50
+ "esw" "eth" 59, 60, 61, 62, 63, 64,
+ 65, 66, 67, 68, 69, 70
+ "mdc_mdio" "eth" 23, 24
+ "gmac1" "eth" 59, 60, 61, 62, 63, 64,
+ 65, 66, 67, 68, 69, 70
+ "gmac2" "eth" 25, 26, 27, 28, 29, 30,
+ 31, 32, 33, 34, 35, 36
+ "i2c0" "i2c" 14, 15
+ "i2c1_0" "i2c" 55, 56
+ "i2c1_1" "i2c" 73, 74
+ "i2c1_2" "i2c" 87, 88
+ "i2c2_0" "i2c" 57, 58
+ "i2c2_1" "i2c" 75, 76
+ "i2c2_2" "i2c" 89, 90
+ "i2s_in_bclk_ws_mclk" "i2s" 3, 4, 5
+ "i2s1_in_data" "i2s" 1
+ "i2s2_in_data" "i2s" 16
+ "i2s3_in_data" "i2s" 17
+ "i2s4_in_data" "i2s" 18
+ "i2s_out_bclk_ws_mclk" "i2s" 3, 4, 5
+ "i2s1_out_data" "i2s" 2
+ "i2s2_out_data" "i2s" 19
+ "i2s3_out_data" "i2s" 20
+ "i2s4_out_data" "i2s" 21
+ "ir_0_tx" "ir" 16
+ "ir_1_tx" "ir" 59
+ "ir_2_tx" "ir" 99
+ "ir_0_rx" "ir" 17
+ "ir_1_rx" "ir" 60
+ "ir_2_rx" "ir" 100
+ "ephy0_led" "led" 86
+ "ephy1_led" "led" 91
+ "ephy2_led" "led" 92
+ "ephy3_led" "led" 93
+ "ephy4_led" "led" 94
+ "wled" "led" 85
+ "par_nand" "flash" 37, 38, 39, 40, 41, 42,
+ 43, 44, 45, 46, 47, 48,
+ 49, 50
+ "snfi" "flash" 8, 9, 10, 11, 12, 13
+ "spi_nor" "flash" 8, 9, 10, 11, 12, 13
+ "pcie0_0_waken_clkreq" "pcie" 14, 15
+ "pcie0_1_waken_clkreq" "pcie" 79, 80
+ "pcie1_0_waken_clkreq" "pcie" 14, 15
+ "pcie0_pad_perst" "pcie" 83
+ "pcie1_pad_perst" "pcie" 84
+ "pwm_ch1_0" "pwm" 51
+ "pwm_ch1_1" "pwm" 73
+ "pwm_ch1_2" "pwm" 95
+ "pwm_ch2_0" "pwm" 52
+ "pwm_ch2_1" "pwm" 74
+ "pwm_ch2_2" "pwm" 96
+ "pwm_ch3_0" "pwm" 53
+ "pwm_ch3_1" "pwm" 75
+ "pwm_ch3_2" "pwm" 97
+ "pwm_ch4_0" "pwm" 54
+ "pwm_ch4_1" "pwm" 67
+ "pwm_ch4_2" "pwm" 76
+ "pwm_ch4_3" "pwm" 98
+ "pwm_ch5_0" "pwm" 68
+ "pwm_ch5_1" "pwm" 77
+ "pwm_ch5_2" "pwm" 99
+ "pwm_ch6_0" "pwm" 69
+ "pwm_ch6_1" "pwm" 78
+ "pwm_ch6_2" "pwm" 81
+ "pwm_ch6_3" "pwm" 100
+ "pwm_ch7_0" "pwm" 70
+ "pwm_ch7_1" "pwm" 82
+ "pwm_ch7_2" "pwm" 101
+ "sd_0" "sd" 16, 17, 18, 19, 20, 21
+ "sd_1" "sd" 25, 26, 27, 28, 29, 30
+ "spic0_0" "spi" 63, 64, 65, 66
+ "spic0_1" "spi" 79, 80, 81, 82
+ "spic1_0" "spi" 67, 68, 69, 70
+ "spic1_1" "spi" 73, 74, 75, 76
+ "tdm_0_out_mclk_bclk" "tdm" 8, 9, 10
+ "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13
+ "tdm_0_out_data" "tdm" 20
+ "tdm_0_in_data" "tdm" 21
+ "tdm_1_out_mclk_bclk" "tdm" 57, 58, 59
+ "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62
+ "tdm_1_out_data" "tdm" 55
+ "tdm_1_in_data" "tdm" 56
+ "uart0_0_tx_rx" "uart" 6, 7
+ "uart1_0_tx_rx" "uart" 55, 56
+ "uart1_0_rts_cts" "uart" 57, 58
+ "uart1_1_tx_rx" "uart" 73, 74
+ "uart1_1_rts_cts" "uart" 75, 76
+ "uart2_0_tx_rx" "uart" 3, 4
+ "uart2_0_rts_cts" "uart" 1, 2
+ "uart2_1_tx_rx" "uart" 51, 52
+ "uart2_1_rts_cts" "uart" 53, 54
+ "uart2_2_tx_rx" "uart" 59, 60
+ "uart2_2_rts_cts" "uart" 61, 62
+ "uart2_3_tx_rx" "uart" 95, 96
+ "uart3_0_tx_rx" "uart" 57, 58
+ "uart3_1_tx_rx" "uart" 81, 82
+ "uart3_1_rts_cts" "uart" 79, 80
+ "uart4_0_tx_rx" "uart" 61, 62
+ "uart4_1_tx_rx" "uart" 91, 92
+ "uart4_1_rts_cts" "uart" 93, 94
+ "uart4_2_tx_rx" "uart" 97, 98
+ "uart4_2_rts_cts" "uart" 95, 96
+
+Example:
+
+ pio: pinctrl@10211000 {
+ compatible = "mediatek,mt7622-pinctrl";
+ reg = <0 0x10211000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl_eth_default: eth-default {
+ mux_mdio {
+ groups = "mdc_mdio";
+ function = "eth";
+ drive-strength = <12>;
+ };
+
+ mux_gmac2 {
+ groups = "gmac2";
+ function = "eth";
+ drive-strength = <12>;
+ };
+
+ mux_esw {
+ groups = "esw";
+ function = "eth";
+ drive-strength = <8>;
+ };
+
+ conf_mdio {
+ pins = "MDC";
+ bias-pull-up;
+ };
+ };
+ };
--
2.7.4