Re: [PATCH v7 1/2] dt-bindings: watchdog: Add Spreadtrum watchdog documentation

[Guenter Roeck]

On 11/27/2017 06:18 PM, Eric Long wrote:
> This patch adds the documentation for Spreadtrum watchdog driver.
>
> Signed-off-by: Eric Long <eric.long@xxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>

The patch series is in my tree, and will ultimately find its way into Wim's tree.
No need to resend it anymore.

In general, if a patch is available in
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git watchdog-next
there is no need to resend it.

Thanks,
Guenter

> ---
> Changes since v6:
> - No updates.
>
> Changes since v5:
> - No updates.
>
> Changes since v4:
> - No updates.
>
> Changes since v3:
> - No updates.
>
> Changes since v2:
> - Add acked tag from Rob.
>
> Changes since v1:
> - No updates.
> ---
>   .../devicetree/bindings/watchdog/sprd-wdt.txt         | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> new file mode 100644
> index 0000000..aeaf3e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> @@ -0,0 +1,19 @@
> +Spreadtrum SoCs Watchdog timer
> +
> +Required properties:
> +- compatible : Should be "sprd,sp9860-wdt".
> +- reg : Specifies base physical address and size of the registers.
> +- interrupts : Exactly one interrupt specifier.
> +- timeout-sec : Contain the default watchdog timeout in seconds.
> +- clock-names : Contain the input clock names.
> +- clocks : Phandles to input clocks.
> +
> +Example:
> +	watchdog: watchdog@40310000 {
> +		compatible = "sprd,sp9860-wdt";
> +		reg = <0 0x40310000 0 0x1000>;
> +		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +		timeout-sec = <12>;
> +		clock-names = "enable", "rtc_enable";
> +		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
> +	};