Re: v4.14/v4.15-rc1: deferred setup in drm/fb-helper breaks entering pc3

From: Thomas Voegtle
Date: Tue Nov 28 2017 - 05:28:41 EST

Next message: Greg Kroah-Hartman: "[PATCH 4.4 33/96] ALSA: usb-audio: Add sanity checks to FE parser"
Previous message: Greg Kroah-Hartman: "[PATCH 4.4 18/96] MIPS: Fix an n32 core file generation regset support regression"
In reply to: Maarten Lankhorst: "Re: v4.14/v4.15-rc1: deferred setup in drm/fb-helper breaks entering pc3"
Next in thread: Maarten Lankhorst: "[PATCH] drm/fb_helper: Disable all crtc's when initial setup fails."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 28 Nov 2017, Maarten Lankhorst wrote:

Op 28-11-17 om 10:30 schreef Thomas Voegtle:

On Tue, 28 Nov 2017, Maarten Lankhorst wrote:

Op 27-11-17 om 19:09 schreef Thomas Voegtle:

Hello,

with v4.14 I recognized that my file server (headless haswell system)
doesn't enter packages pc3 anymore and only enters pc2 according to
powertop.
In v4.13 the system used pc2 and pc3.

So I bisected that down to:

ca91a2758fcef6635626993557dd51cfbb6dd134 is the first bad commit
commit ca91a2758fcef6635626993557dd51cfbb6dd134
Author: Daniel Vetter <daniel.vetter@xxxxxxxx>
Date:ÂÂ Thu Jul 6 15:00:21 2017 +0200

ÂÂÂ drm/fb-helper: Support deferred setup

Reverting this commit on top of v4.14 and v4.15-rc1 fixes the problem and
the system uses package states pc2 and pc3 again.

Nothing is connected to the VGA and DVI port.
I'm using a kernel without modules on openSUSE 42.3.
I have no "vga=xxx" or something like that on the cmdline.

Thanks,

ÂÂÂÂÂ Thomas

Could you send some logs with drm.debug=0x1f ?

~Maarten

dmesg attached.

Does this work? A log of a working config (4.14 or with revert) would be nice regardless. :)

Yes, that helps. 4.15-rc1 with that patch applied the system enters pc2 and pc3 again.
attached: dmesg.4.15-rc1.with.patch.txt

Ah, sorry for just sending the log of the not working stuff.
4.14 is broken, too, 4.13 was ok, so I attached dmesg.4.15-rc1.with.revert.txt.
[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[ 0.000000] Linux version 4.15.0-rc1-i5-dirty (thomas@maggie) (gcc version 4.8.5 (SUSE Linux)) #240 SMP Tue Nov 28 11:11:45 CET 2017
[ 0.000000] Command line: root=/dev/sda3 resume=/dev/sda1 console=ttyS0,115200N8 panic=30 no_console_suspend drm.debug=0x1f
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000685a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000685a6000-0x00000000685acfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000685ad000-0x0000000068d7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000068d7c000-0x0000000068fecfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000068fed000-0x0000000079ba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079ba7000-0x0000000079edffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079ee0000-0x000000007a0e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a0e1000-0x000000007a890fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007a891000-0x000000007affefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c000000-0x000000007e1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000100dfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H81MG/H81MG, BIOS 4.6.5 06/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x100e00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FFF800000 write-back
[ 0.000000] 2 base 0100800000 mask 7FFFC00000 write-back
[ 0.000000] 3 base 0100C00000 mask 7FFFE00000 write-back
[ 0.000000] 4 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 5 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff908c80097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1406f000, 0x1406ffff] PGTABLE
[ 0.000000] BRK [0x14070000, 0x14070fff] PGTABLE
[ 0.000000] BRK [0x14071000, 0x14071fff] PGTABLE
[ 0.000000] BRK [0x14072000, 0x14072fff] PGTABLE
[ 0.000000] BRK [0x14073000, 0x14073fff] PGTABLE
[ 0.000000] BRK [0x14074000, 0x14074fff] PGTABLE
[ 0.000000] BRK [0x14075000, 0x14075fff] PGTABLE
[ 0.000000] BRK [0x14076000, 0x14076fff] PGTABLE
[ 0.000000] BRK [0x14077000, 0x14077fff] PGTABLE
[ 0.000000] BRK [0x14078000, 0x14078fff] PGTABLE
[ 0.000000] BRK [0x14079000, 0x14079fff] PGTABLE
[ 0.000000] BRK [0x1407a000, 0x1407afff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007A867080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A872D40 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A867190 00BBAB (v02 ALASKA A M I 00000026 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000007A88F080 000040
[ 0.000000] ACPI: APIC 0x000000007A872E50 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A872EC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A872F10 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A873450 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A873F28 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000007A8740F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007A874130 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007A874168 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A8744D8 0034DC (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000007A8779B8 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000100dfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000685a5fff]
[ 0.000000] node 0: [mem 0x00000000685ad000-0x0000000068d7bfff]
[ 0.000000] node 0: [mem 0x0000000068fed000-0x0000000079ba6fff]
[ 0.000000] node 0: [mem 0x0000000079ee0000-0x000000007a0e0fff]
[ 0.000000] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000100dfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000100dfffff]
[ 0.000000] On node 0 totalpages: 501965
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7725 pages used for memmap
[ 0.000000] DMA32 zone: 494385 pages, LIFO batch:31
[ 0.000000] Normal zone: 56 pages used for memmap
[ 0.000000] Normal zone: 3584 pages, LIFO batch:0
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007c200000-0x000000007e1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x685a6000-0x685acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x68d7c000-0x68fecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79ba7000-0x79edffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a0e1000-0x7a890fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a891000-0x7affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7e1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7e200000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff908d80a00000 s105432 r0 d29736 u524288
[ 0.000000] pcpu-alloc: s105432 r0 d29736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 494099
[ 0.000000] Kernel command line: root=/dev/sda3 resume=/dev/sda1 console=ttyS0,115200N8 panic=30 no_console_suspend drm.debug=0x1f
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 250888(95%)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1885444K/2007860K available (6275K kernel code, 602K rwdata, 2508K rodata, 836K init, 524K bss, 122416K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3192.706 MHz processor
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.41 BogoMIPS (lpj=12770824)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040025] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.044004] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.048099] CPU: Physical Processor ID: 0
[ 0.052000] CPU: Processor Core ID: 0
[ 0.056003] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.060000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.064002] mce: CPU supports 9 MCE banks
[ 0.068006] CPU0: Thermal monitoring enabled (TM1)
[ 0.072010] process: using mwait in idle threads
[ 0.076002] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.080000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.084077] Freeing SMP alternatives memory: 24K
[ 0.088209] TSC deadline timer enabled
[ 0.088210] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.092030] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.096002] ... version: 3
[ 0.100000] ... bit width: 48
[ 0.104000] ... generic registers: 8
[ 0.108000] ... value mask: 0000ffffffffffff
[ 0.112000] ... max period: 00007fffffffffff
[ 0.116000] ... fixed-purpose events: 3
[ 0.120000] ... event mask: 00000007000000ff
[ 0.124020] Hierarchical SRCU implementation.
[ 0.128359] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.132010] smp: Bringing up secondary CPUs ...
[ 0.136036] x86: Booting SMP configuration:
[ 0.140001] .... node #0, CPUs: #1 #2 #3
[ 0.141307] smp: Brought up 1 node, 4 CPUs
[ 0.148001] smpboot: Max logical packages: 1
[ 0.152001] smpboot: Total of 4 processors activated (25541.64 BogoMIPS)
[ 0.158205] devtmpfs: initialized
[ 0.160104] PM: Registering ACPI NVS region [mem 0x685a6000-0x685acfff] (28672 bytes)
[ 0.164002] PM: Registering ACPI NVS region [mem 0x7a0e1000-0x7a890fff] (8060928 bytes)
[ 0.168099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.172002] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.176044] RTC time: 10:14:04, date: 11/28/17
[ 0.180030] NET: Registered protocol family 16
[ 0.184081] cpuidle: using governor ladder
[ 0.188011] cpuidle: using governor menu
[ 0.192034] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.196001] ACPI: bus type PCI registered
[ 0.200009] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.212002] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.216004] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.228032] PCI: Using configuration type 1 for base access
[ 0.232021] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.236982] ACPI: Added _OSI(Module Device)
[ 0.240002] ACPI: Added _OSI(Processor Device)
[ 0.244002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.248000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.252132] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265851] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.272384] ACPI: Dynamic OEM Table Load:
[ 0.276004] ACPI: SSDT 0xFFFF908D80013000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.280261] ACPI: Dynamic OEM Table Load:
[ 0.284004] ACPI: SSDT 0xFFFF908D80591800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.292293] ACPI: Dynamic OEM Table Load:
[ 0.296003] ACPI: SSDT 0xFFFF908D8078A800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.304999] ACPI: Interpreter enabled
[ 0.308022] ACPI: (supports S0 S1 S4 S5)
[ 0.311941] ACPI: Using IOAPIC for interrupt routing
[ 0.316021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.328332] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.340146] ACPI: Power Resource [FN00] (off)
[ 0.344058] ACPI: Power Resource [FN01] (off)
[ 0.348056] ACPI: Power Resource [FN02] (off)
[ 0.352056] ACPI: Power Resource [FN03] (off)
[ 0.356054] ACPI: Power Resource [FN04] (off)
[ 0.360654] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.368004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.376201] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.384132] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.392001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.400269] PCI host bridge to bus 0000:00
[ 0.404002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.412001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.416001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.424001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.432001] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.440001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.448001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.456001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.460001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.468001] pci_bus 0000:00: root bus resource [mem 0x7e200000-0xfeafffff window]
[ 0.476001] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.484005] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.484072] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.484079] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.484083] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.484086] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.484146] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.484152] pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
[ 0.484232] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.484248] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.484297] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.484350] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.484367] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1e000-0xf7f1e00f 64bit]
[ 0.484419] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.484477] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.484495] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f1c000-0xf7f1c3ff]
[ 0.484565] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.484619] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.484635] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.484692] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.484746] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.484803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.484896] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.484953] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.485042] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.485099] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.485192] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.485210] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b3ff]
[ 0.485281] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.485338] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.485478] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.485491] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.485496] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.485501] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.485506] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.485512] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.485517] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1a000-0xf7f1a7ff]
[ 0.485545] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.485593] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.485607] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f19000-0xf7f190ff 64bit]
[ 0.485623] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.485712] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.488048] pci 0000:02:00.0: [14f1:8880] type 00 class 0x040000
[ 0.488087] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7dfffff 64bit]
[ 0.488241] pci 0000:02:00.0: supports D1 D2
[ 0.488241] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500030] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.508004] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 0.508049] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.508076] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.508101] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
[ 0.508117] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.508204] pci 0000:03:00.0: supports D1 D2
[ 0.508204] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.520016] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.524002] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.524004] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.524008] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.524020] pci_bus 0000:00: on NUMA node 0
[ 0.524632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.532044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.536041] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.544041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *10 11 12 14 15)
[ 0.552041] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.560041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.568041] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.576041] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.580242] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.584000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.596003] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.600000] vgaarb: loaded
[ 0.602739] SCSI subsystem initialized
[ 0.608005] libata version 3.00 loaded.
[ 0.608006] ACPI: bus type USB registered
[ 0.612006] usbcore: registered new interface driver usbfs
[ 0.616003] usbcore: registered new interface driver hub
[ 0.624007] usbcore: registered new device driver usb
[ 0.628007] Linux video capture interface: v2.00
[ 0.632016] Advanced Linux Sound Architecture Driver Initialized.
[ 0.640003] PCI: Using ACPI for IRQ routing
[ 0.645235] PCI: pci_cache_line_size set to 64 bytes
[ 0.645266] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.645267] e820: reserve RAM buffer [mem 0x685a6000-0x6bffffff]
[ 0.645267] e820: reserve RAM buffer [mem 0x68d7c000-0x6bffffff]
[ 0.645268] e820: reserve RAM buffer [mem 0x79ba7000-0x7bffffff]
[ 0.645269] e820: reserve RAM buffer [mem 0x7a0e1000-0x7bffffff]
[ 0.645269] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.645270] e820: reserve RAM buffer [mem 0x100e00000-0x103ffffff]
[ 0.645349] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.652001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.658011] clocksource: Switched to clocksource hpet
[ 0.661082] pnp: PnP ACPI init
[ 0.664196] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.670809] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.670947] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.676866] system 00:01: [io 0xffff] has been reserved
[ 0.682176] system 00:01: [io 0xffff] has been reserved
[ 0.687488] system 00:01: [io 0xffff] has been reserved
[ 0.692801] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.698719] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.704631] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.710552] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.716470] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.722388] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.728311] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.728325] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.728357] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.734274] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.734380] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.740295] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.746213] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.752134] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.752381] pnp 00:05: [dma 0 disabled]
[ 0.752469] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.752501] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.758420] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.758538] pnp 00:07: [dma 0 disabled]
[ 0.758565] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.758919] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.765534] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.772146] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.778758] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.785371] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.791983] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.798595] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.805207] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.811811] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.818425] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.825384] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.831996] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.838611] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.838799] pnp: PnP ACPI: found 9 devices
[ 0.848350] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.857225] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.857227] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.857228] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.857241] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7e200000-0x7e3fffff]
[ 0.864024] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.871759] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.877852] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.882819] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.888914] pci 0000:00:1c.0: bridge window [mem 0x7e200000-0x7e3fffff]
[ 0.895699] pci 0000:00:1c.0: bridge window [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.903440] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.908406] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 0.915193] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.920155] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.926249] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.933034] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.940775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.940776] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.940777] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.940777] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.940778] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.940779] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.940779] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.940780] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.940781] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.940781] pci_bus 0000:00: resource 13 [mem 0x7e200000-0xfeafffff window]
[ 0.940782] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.940783] pci_bus 0000:01: resource 1 [mem 0x7e200000-0x7e3fffff]
[ 0.940784] pci_bus 0000:01: resource 2 [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.940784] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7dfffff]
[ 0.940785] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.940786] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.940786] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.940863] NET: Registered protocol family 2
[ 0.945272] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.952504] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.959132] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.965669] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.971674] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.978127] NET: Registered protocol family 1
[ 0.982492] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.036078] PCI: CLS 64 bytes, default 64
[ 1.036085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.042521] software IO TLB [mem 0x73800000-0x77800000] (64MB) mapped at [ffff908cf3800000-ffff908cf77fffff]
[ 1.052488] Scanning for low memory corruption every 60 seconds
[ 1.058569] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 1.065487] zbud: loaded
[ 1.068209] fuse init (API version 7.26)
[ 1.073177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.080566] io scheduler noop registered
[ 1.084492] io scheduler deadline registered (default)
[ 1.089631] io scheduler mq-deadline registered (default)
[ 1.095292] intel_idle: MWAIT substates: 0x42120
[ 1.095293] intel_idle: v0.4.1 model 0x3C
[ 1.095371] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.095402] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.103762] ACPI: Power Button [PWRB]
[ 1.107450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.114852] ACPI: Power Button [PWRF]
[ 1.118969] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.131229] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.136882] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.141333] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.146987] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.153076] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.158730] ACPI: Thermal Zone [THRM] (34 C)
[ 1.163056] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 1.189852] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.197991] Non-volatile memory driver v1.3
[ 1.202212] [drm:drm_core_init] Initialized
[ 1.202304] [drm:intel_detect_pch] Found LynxPoint PCH
[ 1.202308] [drm:intel_power_domains_init] Allowed DC state mask 00
[ 1.202344] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0412 rev=0x06
[ 1.202346] [drm:intel_device_info_dump] i915 device info: is_mobile: no
[ 1.202347] [drm:intel_device_info_dump] i915 device info: is_lp: no
[ 1.202348] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no
[ 1.202350] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no
[ 1.202351] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes
[ 1.202352] [drm:intel_device_info_dump] i915 device info: has_csr: no
[ 1.202353] [drm:intel_device_info_dump] i915 device info: has_ddi: yes
[ 1.202354] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes
[ 1.202355] [drm:intel_device_info_dump] i915 device info: has_reset_engine: no
[ 1.202357] [drm:intel_device_info_dump] i915 device info: has_fbc: yes
[ 1.202358] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes
[ 1.202359] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes
[ 1.202360] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no
[ 1.202361] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no
[ 1.202362] [drm:intel_device_info_dump] i915 device info: has_guc: no
[ 1.202364] [drm:intel_device_info_dump] i915 device info: has_guc_ct: no
[ 1.202365] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes
[ 1.202366] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes
[ 1.202367] [drm:intel_device_info_dump] i915 device info: has_llc: yes
[ 1.202368] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no
[ 1.202369] [drm:intel_device_info_dump] i915 device info: has_logical_ring_preemption: no
[ 1.202370] [drm:intel_device_info_dump] i915 device info: has_overlay: no
[ 1.202372] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no
[ 1.202373] [drm:intel_device_info_dump] i915 device info: has_psr: yes
[ 1.202374] [drm:intel_device_info_dump] i915 device info: has_rc6: yes
[ 1.202375] [drm:intel_device_info_dump] i915 device info: has_rc6p: no
[ 1.202376] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes
[ 1.202377] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes
[ 1.202379] [drm:intel_device_info_dump] i915 device info: has_snoop: no
[ 1.202380] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no
[ 1.202381] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no
[ 1.202382] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no
[ 1.202383] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no
[ 1.202384] [drm:intel_device_info_dump] i915 device info: supports_tv: no
[ 1.202385] [drm:i915_driver_load] i915 device info: has_ipc: no
[ 1.202397] [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing
[ 1.202441] [drm] PipeC fused off
[ 1.205759] [drm:intel_device_info_runtime_init] slice mask: 0000
[ 1.205760] [drm:intel_device_info_runtime_init] slice total: 0
[ 1.205761] [drm:intel_device_info_runtime_init] subslice total: 0
[ 1.205763] [drm:intel_device_info_runtime_init] subslice mask 0000
[ 1.205764] [drm:intel_device_info_runtime_init] subslice per slice: 0
[ 1.205765] [drm:intel_device_info_runtime_init] EU total: 0
[ 1.205766] [drm:intel_device_info_runtime_init] EU per subslice: 0
[ 1.205767] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 1.205769] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 1.205769] [drm:i915_driver_load] has EU power gating: n
[ 1.205770] [drm:i915_driver_load] ppgtt mode: 1
[ 1.205771] [drm:i915_driver_load] use GPU semaphores? yes
[ 1.205777] [drm] Memory usable by graphics device = 2048M
[ 1.211260] [drm:i915_ggtt_probe_hw] GMADR size = 256M
[ 1.211261] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M
[ 1.211262] [drm] Replacing VGA console driver
[ 1.216671] Console: switching to colour dummy device 80x25
[ 1.222368] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
[ 1.222374] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7a878018
[ 1.222378] [drm:intel_opregion_setup] Public ACPI methods supported
[ 1.222378] [drm:intel_opregion_setup] SWSCI supported
[ 1.228402] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[ 1.228402] [drm:intel_opregion_setup] ASLE supported
[ 1.228403] [drm:intel_opregion_setup] ASLE extension supported
[ 1.228405] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
[ 1.228430] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.235041] [drm] Driver supports precise vblank timestamp query.
[ 1.241133] [drm:intel_bios_init] Set default to SSC at 120000 kHz
[ 1.241134] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 170
[ 1.241136] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.241137] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[ 1.243187] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
[ 1.243190] [drm:intel_bios_init] Panel type: 2 (VBT)
[ 1.243191] [drm:intel_bios_init] DRRS supported mode is static
[ 1.243193] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
[ 1.243197] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.243198] [drm:intel_bios_init] VBT initial LVDS value 300
[ 1.243200] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
[ 1.243201] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
[ 1.243203] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.243204] [drm:intel_bios_init] DRRS State Enabled:1
[ 1.243205] [drm:intel_bios_init] No SDVO device info is found in VBT
[ 1.243207] [drm:intel_bios_init] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.243208] [drm:intel_bios_init] VBT HDMI level shift for port B: 11
[ 1.243222] [drm:intel_dsm_detect] no _DSM method for intel device
[ 1.243226] [drm:i915_driver_load] rawclk rate: 125000 kHz
[ 1.243229] [drm:intel_power_well_enable] enabling always-on
[ 1.243230] [drm:intel_power_well_enable] enabling display
[ 1.243234] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.252711] [drm:drm_irq_install] irq=24
[ 1.252799] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
[ 1.252801] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 1.252802] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
[ 1.252803] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
[ 1.252804] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
[ 1.252805] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 1.252805] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 1.252806] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
[ 1.252807] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
[ 1.252808] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
[ 1.252808] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 1.252809] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 1.252810] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
[ 1.252811] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
[ 1.252811] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
[ 1.252812] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 1.252814] [drm:intel_modeset_init] 2 display pipes available.
[ 1.252835] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
[ 1.252836] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
[ 1.252837] [drm:intel_modeset_init] Max dotclock rate: 540000 kHz
[ 1.253145] [drm:intel_crt_reset] crt adpa set to 0x80f40010
[ 1.253148] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
[ 1.253150] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT)
[ 1.253365] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
[ 1.253367] [drm:intel_modeset_setup_hw_state] [CRTC:37:pipe A] hw state readout: enabled
[ 1.253368] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
[ 1.253369] [drm:intel_modeset_setup_hw_state] [CRTC:47:pipe B] hw state readout: disabled
[ 1.253371] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.253372] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.253373] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000001, on 1
[ 1.253374] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
[ 1.253375] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
[ 1.253376] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
[ 1.253395] [drm:intel_modeset_setup_hw_state] [ENCODER:49:CRT] hw state readout: enabled, pipe A
[ 1.253396] [drm:intel_modeset_setup_hw_state] [ENCODER:50:DDI B] hw state readout: disabled, pipe A
[ 1.253398] [drm:intel_modeset_setup_hw_state] [CONNECTOR:48:VGA-1] hw state readout: enabled
[ 1.253399] [drm:drm_mode_object_put] OBJ ID: 48 (2)
[ 1.253401] [drm:intel_modeset_setup_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled
[ 1.253402] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.253405] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:720x400] for CRTC state ffff908d8028c800
[ 1.253407] [drm:drm_calc_timestamping_constants] crtc 37: hwmode: htotal 900, vtotal 449, vdisplay 400
[ 1.253408] [drm:drm_calc_timestamping_constants] crtc 37: clock 28323 kHz framedur 14267556 linedur 31776
[ 1.253414] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][setup_hw_state]
[ 1.253415] [drm:intel_dump_pipe_config] output_types: ANALOG (0x2)
[ 1.253416] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 24, dithering: 0
[ 1.253417] [drm:intel_dump_pipe_config] fdi: lanes: 1; gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
[ 1.253418] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.253419] [drm:intel_dump_pipe_config] requested mode:
[ 1.253421] [drm:drm_mode_debug_printmodeline] Modeline 0:"720x400" 70 28323 720 738 846 900 400 413 415 449 0x40 0x6
[ 1.253421] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.253423] [drm:drm_mode_debug_printmodeline] Modeline 0:"720x400" 70 28323 720 738 846 900 400 413 415 449 0x40 0x6
[ 1.253425] [drm:intel_dump_pipe_config] crtc timings: 28323 720 738 846 900 400 413 415 449, type: 0x40 flags: 0x6
[ 1.253425] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 28323
[ 1.253426] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
[ 1.253427] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
[ 1.253428] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
[ 1.253429] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.253429] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
[ 1.253430] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
[ 1.253431] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = 0
[ 1.253432] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][setup_hw_state]
[ 1.253433] [drm:intel_dump_pipe_config] output_types: (0x0)
[ 1.253434] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[ 1.253434] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.253435] [drm:intel_dump_pipe_config] requested mode:
[ 1.253437] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.253437] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.253439] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.253440] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.253441] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
[ 1.253442] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.253442] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
[ 1.253443] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1.253444] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.253444] [drm:intel_dump_pipe_config] [PLANE:38:primary B] disabled, scaler_id = 0
[ 1.253445] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
[ 1.253446] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
[ 1.253447] [drm:drm_mode_object_get] OBJ ID: 48 (2)
[ 1.253447] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.253448] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.253449] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling
[ 1.253450] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling
[ 1.253451] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling
[ 1.253457] [drm:drm_atomic_state_init] Allocated atomic state ffff908d80359000
[ 1.253458] [drm:drm_mode_object_get] OBJ ID: 55 (1)
[ 1.253460] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff908d80bab800 state to ffff908d80359000
[ 1.253461] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff908d80bae000 state to ffff908d80359000
[ 1.253463] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff908d803ffe00 state to ffff908d80359000
[ 1.253464] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff908d803ff000 state to ffff908d80359000
[ 1.253466] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff908d803ff100 state to ffff908d80359000
[ 1.253467] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff908d803ffa00 state to ffff908d80359000
[ 1.253468] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff908d803ffd00 state to ffff908d80359000
[ 1.253469] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff908d803ff600 state to ffff908d80359000
[ 1.253471] [drm:drm_mode_object_get] OBJ ID: 48 (3)
[ 1.253471] [drm:drm_mode_object_get] OBJ ID: 48 (4)
[ 1.253473] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:48:VGA-1] ffff908d803fde00 state to ffff908d80359000
[ 1.253473] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.253474] [drm:drm_mode_object_get] OBJ ID: 51 (2)
[ 1.253476] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:51:HDMI-A-1] ffff908d803fd580 state to ffff908d80359000
[ 1.253476] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.253478] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.253478] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.253481] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:48:VGA-1]
[ 1.253483] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:48:VGA-1] keeps [ENCODER:49:CRT], now on [CRTC:37:pipe A]
[ 1.253484] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:51:HDMI-A-1]
[ 1.253485] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:51:HDMI-A-1]
[ 1.253490] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff908d80359000
[ 1.253491] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.253492] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.253492] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.253493] [drm:drm_mode_object_put] OBJ ID: 55 (2)
[ 1.253495] [drm:__drm_atomic_state_free] Freeing atomic state ffff908d80359000
[ 1.253497] [drm:intel_uc_fw_fetch] GuC fw fetch (null)
[ 1.253499] [drm:intel_uc_fw_fetch] GuC fw fetch (null)
[ 1.253601] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000]
[ 1.254840] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
[ 1.254841] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
[ 1.254845] [drm:i915_gem_contexts_init] logical context support initialized
[ 1.255037] [drm:intel_engine_init_common] rcs0 hws offset: 0x7fdee000
[ 1.255041] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fded000
[ 1.255110] [drm:intel_engine_init_common] bcs0 hws offset: 0x7fdec000
[ 1.255253] [drm:intel_engine_init_common] vcs0 hws offset: 0x7fdeb000
[ 1.255363] [drm:intel_engine_init_common] vecs0 hws offset: 0x7fdea000
[ 1.255376] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
[ 1.255398] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 1a) mailbox access failed for intel_init_gt_powersave: -6
[ 1.255400] [drm:intel_init_gt_powersave] Overclocking supported, max: 1150MHz, overclock: 1150MHz
[ 1.255407] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
[ 1.255408] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
[ 1.255409] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
[ 1.255411] [drm:drm_mode_object_get] OBJ ID: 48 (3)
[ 1.255411] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.255412] [drm:drm_mode_object_get] OBJ ID: 51 (2)
[ 1.255413] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.255418] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.255419] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.255421] [drm:drm_minor_register]
[ 1.255422] [drm:drm_minor_register]
[ 1.255440] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.255441] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.255443] [drm:intel_crt_detect] [CONNECTOR:48:VGA-1] force=0
[ 1.255445] [drm:intel_crt_detect] trigger hotplug detect cycle: adpa=0x80f40010
[ 1.255473] [drm:drm_minor_register] new minor registered 128
[ 1.255474] [drm:drm_minor_register]
[ 1.255529] [drm:drm_minor_register] new minor registered 0
[ 1.255550] [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
[ 1.255551] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.255555] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.255562] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
[ 1.255563] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.255566] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.255567] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.262738] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.262738] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.262740] [drm:intel_opregion_register] 2 outputs detected
[ 1.262741] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.262741] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.263632] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.265524] [drm:intel_crt_detect] ironlake hotplug adpa=0x80f40010, result 0
[ 1.265526] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.267571] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.267572] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[ 1.269614] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.269615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.269617] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.269618] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.270442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.270442] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.270444] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.270445] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:VGA-1] status updated from unknown to disconnected
[ 1.270446] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.270448] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
[ 1.270966] acpi device:63: registered as cooling_device9
[ 1.272492] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.272493] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.274537] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.274538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.276430] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.276579] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.276580] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.278624] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.278627] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
[ 1.278628] [drm:drm_helper_hpd_irq_event] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected
[ 1.278629] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.278631] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.285601] [drm:asle_work] bclp = 0x800000ff
[ 1.285602] [drm:asle_work] updating opregion backlight 255/255
[ 1.285604] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.285604] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.285654] [drm:drm_setup_crtcs]
[ 1.285657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1]
[ 1.285659] [drm:intel_crt_detect] [CONNECTOR:48:VGA-1] force=1
[ 1.285661] [drm:intel_crt_detect] ironlake hotplug adpa=0x80f40010, result 0
[ 1.285662] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.285823] ahci 0000:00:1f.2: version 3.0
[ 1.285937] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
[ 1.287702] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.287703] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[ 1.289744] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.289746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.289747] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.289748] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.290571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.290572] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.290573] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.290575] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.290575] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.290576] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1] disconnected
[ 1.290578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
[ 1.290579] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
[ 1.292621] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.292622] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.294121] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
[ 1.294665] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.294667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.296709] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.296710] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.298754] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.298756] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
[ 1.298758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
[ 1.298759] [drm:drm_setup_crtcs] No connectors reported connected with modes
[ 1.298759] [drm:drm_setup_crtcs] connector 48 enabled? no
[ 1.298760] [drm:drm_setup_crtcs] connector 51 enabled? no
[ 1.298762] [drm:intel_fb_initial_config] Not using firmware configuration
[ 1.298763] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[ 1.298764] [drm] Cannot find any crtc or sizes
[ 1.298765] [drm:drm_atomic_state_init] Allocated atomic state ffff908cf3600000
[ 1.298767] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff908d80031700 state to ffff908cf3600000
[ 1.298769] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff908d80031200 state to ffff908cf3600000
[ 1.298770] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031200 to [NOCRTC]
[ 1.298771] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031200
[ 1.298773] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff908d80031400 state to ffff908cf3600000
[ 1.298774] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031400 to [NOCRTC]
[ 1.298775] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031400
[ 1.298776] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff908d80031600 state to ffff908cf3600000
[ 1.298777] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff908d80031d00 state to ffff908cf3600000
[ 1.298778] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031d00 to [NOCRTC]
[ 1.298779] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031d00
[ 1.298780] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff908d80031a00 state to ffff908cf3600000
[ 1.298781] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031a00 to [NOCRTC]
[ 1.298782] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031a00
[ 1.298783] [drm:drm_mode_object_get] OBJ ID: 55 (1)
[ 1.298785] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff908d80543000 state to ffff908cf3600000
[ 1.298786] [drm:drm_mode_object_put] OBJ ID: 55 (2)
[ 1.298787] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff908d80543000
[ 1.298788] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031700 to [NOCRTC]
[ 1.298789] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031700
[ 1.298790] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff908cf3600000
[ 1.298791] [drm:drm_mode_object_get] OBJ ID: 48 (4)
[ 1.298792] [drm:drm_mode_object_get] OBJ ID: 48 (5)
[ 1.298793] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:48:VGA-1] ffff908d8058fe80 state to ffff908cf3600000
[ 1.298794] [drm:drm_mode_object_put] OBJ ID: 48 (6)
[ 1.298794] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.298795] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.298796] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff908d8058fe80 to [NOCRTC]
[ 1.298798] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff908d80545000 state to ffff908cf3600000
[ 1.298799] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff908d80545000
[ 1.298800] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff908d80031600 to [NOCRTC]
[ 1.298801] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff908d80031600
[ 1.298802] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff908cf3600000
[ 1.298803] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.298803] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.298805] [drm:drm_atomic_check_only] checking ffff908cf3600000
[ 1.298806] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] mode changed
[ 1.298807] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] enable changed
[ 1.298808] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] active changed
[ 1.298809] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:48:VGA-1]
[ 1.298810] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:48:VGA-1]
[ 1.298811] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] needs all connectors, enable: n, active: n
[ 1.298812] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff908cf3600000
[ 1.298813] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.298813] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.298815] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.298815] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.298818] [drm:drm_atomic_commit] committing ffff908cf3600000
[ 1.298834] [drm:intel_disable_pipe] disabling pipe A
[ 1.319176] [drm:intel_disable_shared_dpll] disable SPLL (active 1, on? 1) for crtc 37
[ 1.319179] [drm:intel_disable_shared_dpll] disabling SPLL
[ 1.319183] [drm:intel_atomic_commit_tail] [ENCODER:49:CRT]
[ 1.319184] [drm:intel_atomic_commit_tail] [ENCODER:50:DDI B]
[ 1.319185] [drm:verify_connector_state.isra.117] [CONNECTOR:48:VGA-1]
[ 1.319187] [drm:verify_single_dpll_state.isra.118] WRPLL 1
[ 1.319188] [drm:verify_single_dpll_state.isra.118] WRPLL 2
[ 1.319189] [drm:verify_single_dpll_state.isra.118] SPLL
[ 1.319190] [drm:verify_single_dpll_state.isra.118] LCPLL 810
[ 1.319190] [drm:verify_single_dpll_state.isra.118] LCPLL 1350
[ 1.319191] [drm:verify_single_dpll_state.isra.118] LCPLL 2700
[ 1.319196] [drm:intel_power_well_disable] disabling display
[ 1.319198] [drm:drm_mode_object_put] OBJ ID: 55 (1)
[ 1.319201] [drm:intel_atomic_commit_tail] [CRTC:37:pipe A]
[ 1.319203] [drm:intel_power_well_disable] disabling always-on
[ 1.319208] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff908cf3600000
[ 1.319209] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.319210] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.319213] [drm:__drm_atomic_state_free] Freeing atomic state ffff908cf3600000
[ 1.340482] scsi host0: ahci
[ 1.343614] scsi host1: ahci
[ 1.346716] scsi host2: ahci
[ 1.349725] scsi host3: ahci
[ 1.352715] scsi host4: ahci
[ 1.355700] scsi host5: ahci
[ 1.358602] ata1: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a100 irq 25
[ 1.365995] ata2: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a180 irq 25
[ 1.373387] ata3: DUMMY
[ 1.375836] ata4: DUMMY
[ 1.378283] ata5: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a300 irq 25
[ 1.385675] ata6: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a380 irq 25
[ 1.393088] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.398662] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.416817] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffa2e540095000, b8:97:5a:62:36:25, XID 0c000800 IRQ 26
[ 1.427070] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.435593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.442121] ehci-pci: EHCI PCI platform driver
[ 1.446632] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.451857] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.459255] ehci-pci 0000:00:1a.0: debug port 2
[ 1.467672] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.467679] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f1c000
[ 1.488027] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.493880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.500668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.507884] usb usb1: Product: EHCI Host Controller
[ 1.512765] usb usb1: Manufacturer: Linux 4.15.0-rc1-i5-dirty ehci_hcd
[ 1.519290] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.524023] hub 1-0:1.0: USB hub found
[ 1.527780] hub 1-0:1.0: 2 ports detected
[ 1.532090] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.537320] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.544717] ehci-pci 0000:00:1d.0: debug port 2
[ 1.553122] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.553128] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1b000
[ 1.572072] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.578136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.584925] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.592142] usb usb2: Product: EHCI Host Controller
[ 1.597022] usb usb2: Manufacturer: Linux 4.15.0-rc1-i5-dirty ehci_hcd
[ 1.603546] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.608351] hub 2-0:1.0: USB hub found
[ 1.612133] hub 2-0:1.0: 2 ports detected
[ 1.616484] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.621710] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.630156] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.638591] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.638950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.645739] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652956] usb usb3: Product: xHCI Host Controller
[ 1.657836] usb usb3: Manufacturer: Linux 4.15.0-rc1-i5-dirty xhci-hcd
[ 1.664360] usb usb3: SerialNumber: 0000:00:14.0
[ 1.669143] hub 3-0:1.0: USB hub found
[ 1.672917] hub 3-0:1.0: 10 ports detected
[ 1.677953] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.683182] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.690941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.697733] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.704948] usb usb4: Product: xHCI Host Controller
[ 1.706635] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.707481] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.707914] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.707939] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.708655] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 1.708656] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.710040] ata1.00: configured for UDMA/133
[ 1.710140] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 1.710383] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.710409] sd 0:0:0:0: [sda] Write Protect is off
[ 1.710410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.710461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.759053] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.759405] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.788036] usb usb4: Manufacturer: Linux 4.15.0-rc1-i5-dirty xhci-hcd
[ 1.794561] usb usb4: SerialNumber: 0000:00:14.0
[ 1.799276] hub 4-0:1.0: USB hub found
[ 1.803050] hub 4-0:1.0: 2 ports detected
[ 1.807387] i8042: PNP: No PS/2 controller found.
[ 1.812400] rtc_cmos 00:02: RTC can wake from S4
[ 1.817192] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.823307] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.831030] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.836787] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.843347] IR NEC protocol handler initialized
[ 1.847880] IR RC5(x/sz) protocol handler initialized
[ 1.852930] IR RC6 protocol handler initialized
[ 1.857464] IR JVC protocol handler initialized
[ 1.861995] IR Sony protocol handler initialized
[ 1.866608] IR SANYO protocol handler initialized
[ 1.871312] IR Sharp protocol handler initialized
[ 1.876019] IR MCE Keyboard/mouse protocol handler initialized
[ 1.881851] IR XMP protocol handler initialized
[ 1.886384] saa7146: register extension 'budget_av'
[ 1.891596] it87: Found IT8728F chip at 0xa30, revision 1
[ 1.897011] it87: Beeping is supported
[ 1.900765] ACPI Warning: SystemIO range 0x0000000000000A35-0x0000000000000A36 conflicts with OpRegion 0x0000000000000A35-0x0000000000000A36 (\SENP) (20170831/utaddress-247)
[ 1.916216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.926598] intel_pstate: Intel P-state driver initializing
[ 1.932280] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.937723] usbcore: registered new interface driver usbhid
[ 1.943303] usbhid: USB HID core driver
[ 1.947936] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
[ 1.956573] [drm:intel_power_well_enable] enabling always-on
[ 1.956574] [drm:intel_power_well_enable] enabling display
[ 1.956803] microcode: sig=0x306c3, pf=0x2, revision=0x22
[ 1.960028] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.968863] microcode: Microcode Update Driver: v2.2.
[ 1.968868] sched_clock: Marking stable (1968860525, 0)->(2024904745, -56044220)
[ 1.981521] zswap: loaded using pool lzo/zbud
[ 1.986157] Magic number: 9:363:225
[ 1.987862] snd_hda_codec_generic hdaudioC1D2: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 1.987863] snd_hda_codec_generic hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.987864] snd_hda_codec_generic hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.987865] snd_hda_codec_generic hdaudioC1D2: mono: mono_out=0x0
[ 1.987865] snd_hda_codec_generic hdaudioC1D2: dig-out=0x1e/0x0
[ 1.987866] snd_hda_codec_generic hdaudioC1D2: inputs:
[ 1.987867] snd_hda_codec_generic hdaudioC1D2: Front Mic=0x19
[ 1.987867] snd_hda_codec_generic hdaudioC1D2: Rear Mic=0x18
[ 1.987868] snd_hda_codec_generic hdaudioC1D2: Line=0x1a
[ 1.992081] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 1.992082] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.992083] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.992083] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 1.992084] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x0
[ 1.992085] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 1.992449] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
[ 1.997484] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 1.997509] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 1.997534] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.997559] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.997583] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.028025] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.076058] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 2.076061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[ 2.124412] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 2.124413] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.124554] hub 1-1:1.0: USB hub found
[ 2.124652] hub 1-1:1.0: 4 ports detected
[ 2.184409] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.184409] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.184681] hub 2-1:1.0: USB hub found
[ 2.184780] hub 2-1:1.0: 6 ports detected
[ 2.213809] rtc_cmos 00:02: setting system clock to 2017-11-28 10:14:06 UTC (1511864046)
[ 2.230660] PM: Image not found (code -22)
[ 2.230661] ALSA device list:
[ 2.233633] #0: HDA Intel HDMI at 0xf7f14000 irq 28
[ 2.238681] #1: HDA Intel PCH at 0xf7f10000 irq 29
[ 2.249464] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[ 2.257485] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 2.302158] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.309814] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.348730] devtmpfs: mounted
[ 2.352005] Freeing unused kernel memory: 836K
[ 2.356445] Write protecting the kernel read-only data: 12288k
[ 2.362539] Freeing unused kernel memory: 1892K
[ 2.368985] Freeing unused kernel memory: 1588K
[ 2.378344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.812075] [drm:intel_enable_gt_powersave] Enabling RC6 states: RC6 on
[ 2.812080] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave: -6
[ 3.100181] clocksource: Switched to clocksource tsc
[ 3.385479] systemd[1]: Failed to insert module 'autofs4': Function not implemented
[ 3.393149] systemd[1]: Failed to insert module 'ipv6': Function not implemented
[ 3.448611] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.484234] systemd[1]: Detected architecture x86-64.
[ 3.521051] systemd[1]: Set hostname to <maggie>.
[ 4.895092] systemd[1]: nss-lookup.target: Dependency Before=nss-lookup.target dropped
[ 4.911619] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 4.920494] systemd[1]: [/usr/lib/systemd/system/rpcbind.socket:14] Failed to parse address value, ignoring: [::]:111
[ 4.931102] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 4.939963] systemd[1]: [/usr/lib/systemd/system/rpcbind.socket:15] Failed to parse address value, ignoring: [::]:111
[ 4.961846] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.984184] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.483093] random: crng init done
[ 5.954468] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.169355] systemd-journald[118]: Received request to flush runtime journal from PID 1
[ 7.479770] [drm:asle_work] bclp = 0x800000ff
[ 7.479772] [drm:asle_work] updating opregion backlight 255/255
[ 7.479775] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.479776] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.928406] Adding 2097148k swap on /dev/sda1. Priority:42 extents:1 across:2097148k FS
[ 8.283065] EXT4-fs (sda5): barriers disabled
[ 8.288257] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 8.477893] EXT4-fs (sda6): barriers disabled
[ 8.492398] EXT4-fs (sda6): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 10.876081] [drm:intel_power_well_disable] disabling display
[ 10.876087] [drm:intel_power_well_disable] disabling always-on
[ 11.714537] r8169 0000:03:00.0 eth0: link down
[ 13.355046] r8169 0000:03:00.0 eth0: link up
[ 0.000000] microcode: microcode updated early to revision 0x22, date = 2017-01-27
[ 0.000000] Linux version 4.15.0-rc1-i5-dirty (thomas@maggie) (gcc version 4.8.5 (SUSE Linux)) #241 SMP Tue Nov 28 11:19:48 CET 2017
[ 0.000000] Command line: root=/dev/sda3 resume=/dev/sda1 console=ttyS0,115200N8 panic=30 no_console_suspend drm.debug=0x1f
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000685a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000685a6000-0x00000000685acfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000685ad000-0x0000000068d7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000068d7c000-0x0000000068fecfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000068fed000-0x0000000079ba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079ba7000-0x0000000079edffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079ee0000-0x000000007a0e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a0e1000-0x000000007a890fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007a891000-0x000000007affefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c000000-0x000000007e1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000100dfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H81MG/H81MG, BIOS 4.6.5 06/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x100e00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FFF800000 write-back
[ 0.000000] 2 base 0100800000 mask 7FFFC00000 write-back
[ 0.000000] 3 base 0100C00000 mask 7FFFE00000 write-back
[ 0.000000] 4 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 5 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9ee040097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2d06f000, 0x2d06ffff] PGTABLE
[ 0.000000] BRK [0x2d070000, 0x2d070fff] PGTABLE
[ 0.000000] BRK [0x2d071000, 0x2d071fff] PGTABLE
[ 0.000000] BRK [0x2d072000, 0x2d072fff] PGTABLE
[ 0.000000] BRK [0x2d073000, 0x2d073fff] PGTABLE
[ 0.000000] BRK [0x2d074000, 0x2d074fff] PGTABLE
[ 0.000000] BRK [0x2d075000, 0x2d075fff] PGTABLE
[ 0.000000] BRK [0x2d076000, 0x2d076fff] PGTABLE
[ 0.000000] BRK [0x2d077000, 0x2d077fff] PGTABLE
[ 0.000000] BRK [0x2d078000, 0x2d078fff] PGTABLE
[ 0.000000] BRK [0x2d079000, 0x2d079fff] PGTABLE
[ 0.000000] BRK [0x2d07a000, 0x2d07afff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007A867080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A872D40 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A867190 00BBAB (v02 ALASKA A M I 00000026 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000007A88F080 000040
[ 0.000000] ACPI: APIC 0x000000007A872E50 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A872EC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A872F10 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A873450 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A873F28 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000007A8740F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007A874130 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007A874168 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000007A8744D8 0034DC (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000007A8779B8 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000100dfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000685a5fff]
[ 0.000000] node 0: [mem 0x00000000685ad000-0x0000000068d7bfff]
[ 0.000000] node 0: [mem 0x0000000068fed000-0x0000000079ba6fff]
[ 0.000000] node 0: [mem 0x0000000079ee0000-0x000000007a0e0fff]
[ 0.000000] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000100dfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000100dfffff]
[ 0.000000] On node 0 totalpages: 501965
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7725 pages used for memmap
[ 0.000000] DMA32 zone: 494385 pages, LIFO batch:31
[ 0.000000] Normal zone: 56 pages used for memmap
[ 0.000000] Normal zone: 3584 pages, LIFO batch:0
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007c200000-0x000000007e1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x685a6000-0x685acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x68d7c000-0x68fecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79ba7000-0x79edffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a0e1000-0x7a890fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a891000-0x7affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7e1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7e200000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff9ee140a00000 s105432 r0 d29736 u524288
[ 0.000000] pcpu-alloc: s105432 r0 d29736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 494099
[ 0.000000] Kernel command line: root=/dev/sda3 resume=/dev/sda1 console=ttyS0,115200N8 panic=30 no_console_suspend drm.debug=0x1f
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 250888(95%)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1885444K/2007860K available (6275K kernel code, 602K rwdata, 2508K rodata, 836K init, 524K bss, 122416K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3192.565 MHz processor
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.13 BogoMIPS (lpj=12770260)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.040024] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.044004] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.048098] CPU: Physical Processor ID: 0
[ 0.052000] CPU: Processor Core ID: 0
[ 0.056003] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.060000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.064003] mce: CPU supports 9 MCE banks
[ 0.068006] CPU0: Thermal monitoring enabled (TM1)
[ 0.072010] process: using mwait in idle threads
[ 0.076002] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.080000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.084077] Freeing SMP alternatives memory: 24K
[ 0.088211] TSC deadline timer enabled
[ 0.088212] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.092029] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.096002] ... version: 3
[ 0.100000] ... bit width: 48
[ 0.104000] ... generic registers: 8
[ 0.108000] ... value mask: 0000ffffffffffff
[ 0.112000] ... max period: 00007fffffffffff
[ 0.116000] ... fixed-purpose events: 3
[ 0.120000] ... event mask: 00000007000000ff
[ 0.124020] Hierarchical SRCU implementation.
[ 0.128361] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.132010] smp: Bringing up secondary CPUs ...
[ 0.136036] x86: Booting SMP configuration:
[ 0.140001] .... node #0, CPUs: #1 #2 #3
[ 0.141306] smp: Brought up 1 node, 4 CPUs
[ 0.148001] smpboot: Max logical packages: 1
[ 0.152001] smpboot: Total of 4 processors activated (25540.52 BogoMIPS)
[ 0.158269] devtmpfs: initialized
[ 0.160105] PM: Registering ACPI NVS region [mem 0x685a6000-0x685acfff] (28672 bytes)
[ 0.164002] PM: Registering ACPI NVS region [mem 0x7a0e1000-0x7a890fff] (8060928 bytes)
[ 0.168099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.172002] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.176044] RTC time: 10:21:33, date: 11/28/17
[ 0.180029] NET: Registered protocol family 16
[ 0.184081] cpuidle: using governor ladder
[ 0.188011] cpuidle: using governor menu
[ 0.192034] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.196001] ACPI: bus type PCI registered
[ 0.200009] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.212002] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.216004] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.228032] PCI: Using configuration type 1 for base access
[ 0.232021] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.236983] ACPI: Added _OSI(Module Device)
[ 0.240003] ACPI: Added _OSI(Processor Device)
[ 0.244001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.248002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.252136] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265932] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.268382] ACPI: Dynamic OEM Table Load:
[ 0.272000] ACPI: SSDT 0xFFFF9EE1401CE000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.280261] ACPI: Dynamic OEM Table Load:
[ 0.284004] ACPI: SSDT 0xFFFF9EE14028E000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.292295] ACPI: Dynamic OEM Table Load:
[ 0.296003] ACPI: SSDT 0xFFFF9EE1407A0E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.304998] ACPI: Interpreter enabled
[ 0.308023] ACPI: (supports S0 S1 S4 S5)
[ 0.311943] ACPI: Using IOAPIC for interrupt routing
[ 0.312020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.316332] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.328131] ACPI: Power Resource [FN00] (off)
[ 0.332059] ACPI: Power Resource [FN01] (off)
[ 0.336056] ACPI: Power Resource [FN02] (off)
[ 0.340056] ACPI: Power Resource [FN03] (off)
[ 0.344055] ACPI: Power Resource [FN04] (off)
[ 0.348649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.352004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.356196] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.360129] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.364001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.368268] PCI host bridge to bus 0000:00
[ 0.372002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.376001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.380001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.384001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.388000] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.392001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.396001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.400002] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.404001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.408001] pci_bus 0000:00: root bus resource [mem 0x7e200000-0xfeafffff window]
[ 0.412001] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.416005] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.416071] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.416079] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.416082] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.416085] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.416145] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.416151] pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
[ 0.416230] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.416246] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.416295] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.416348] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.416366] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1e000-0xf7f1e00f 64bit]
[ 0.416417] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.416475] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.416493] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f1c000-0xf7f1c3ff]
[ 0.416563] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.416618] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.416634] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.416691] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.416745] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.416802] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.416893] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.416951] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.417040] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.417097] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.417188] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.417206] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b3ff]
[ 0.417277] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.417333] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.417473] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.417486] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.417491] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.417496] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.417502] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.417507] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.417512] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1a000-0xf7f1a7ff]
[ 0.417540] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.417589] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.417603] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f19000-0xf7f190ff 64bit]
[ 0.417619] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.417708] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.420048] pci 0000:02:00.0: [14f1:8880] type 00 class 0x040000
[ 0.420087] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7dfffff 64bit]
[ 0.420242] pci 0000:02:00.0: supports D1 D2
[ 0.420243] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432029] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.436004] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 0.436048] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.436076] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.436101] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
[ 0.436117] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.436204] pci 0000:03:00.0: supports D1 D2
[ 0.436204] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448016] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.452002] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.452004] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.452008] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.452020] pci_bus 0000:00: on NUMA node 0
[ 0.452633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.456043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.460041] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.464041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *10 11 12 14 15)
[ 0.468041] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.472040] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.476041] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.480041] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.484240] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.488000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.488002] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.492000] vgaarb: loaded
[ 0.494735] SCSI subsystem initialized
[ 0.496004] libata version 3.00 loaded.
[ 0.496006] ACPI: bus type USB registered
[ 0.500006] usbcore: registered new interface driver usbfs
[ 0.504003] usbcore: registered new interface driver hub
[ 0.508006] usbcore: registered new device driver usb
[ 0.512006] Linux video capture interface: v2.00
[ 0.516018] Advanced Linux Sound Architecture Driver Initialized.
[ 0.520003] PCI: Using ACPI for IRQ routing
[ 0.525235] PCI: pci_cache_line_size set to 64 bytes
[ 0.525266] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.525267] e820: reserve RAM buffer [mem 0x685a6000-0x6bffffff]
[ 0.525267] e820: reserve RAM buffer [mem 0x68d7c000-0x6bffffff]
[ 0.525268] e820: reserve RAM buffer [mem 0x79ba7000-0x7bffffff]
[ 0.525269] e820: reserve RAM buffer [mem 0x7a0e1000-0x7bffffff]
[ 0.525269] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.525270] e820: reserve RAM buffer [mem 0x100e00000-0x103ffffff]
[ 0.525345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.528001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.534013] clocksource: Switched to clocksource hpet
[ 0.537080] pnp: PnP ACPI init
[ 0.540184] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.546799] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.546934] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.552847] system 00:01: [io 0xffff] has been reserved
[ 0.558160] system 00:01: [io 0xffff] has been reserved
[ 0.563473] system 00:01: [io 0xffff] has been reserved
[ 0.568786] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.574705] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.580624] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.586542] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.592461] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.598380] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.604293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.604305] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.604337] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.610258] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.610364] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.616278] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.622197] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.628117] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.628363] pnp 00:05: [dma 0 disabled]
[ 0.628451] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.628482] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.634403] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.634520] pnp 00:07: [dma 0 disabled]
[ 0.634548] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.634902] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.641516] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.648129] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.654741] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.661354] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.667966] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.674578] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.681191] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.687803] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.694408] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.701370] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.707980] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.714593] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.714780] pnp: PnP ACPI: found 9 devices
[ 0.724330] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.733199] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.733200] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.733201] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.733215] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7e200000-0x7e3fffff]
[ 0.739999] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.747736] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.753827] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.758793] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.764888] pci 0000:00:1c.0: bridge window [mem 0x7e200000-0x7e3fffff]
[ 0.771672] pci 0000:00:1c.0: bridge window [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.779415] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.784380] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7dfffff]
[ 0.791168] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.796129] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.802223] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.809010] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.816751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.816751] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.816752] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.816753] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.816753] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.816754] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.816755] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.816755] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.816756] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.816757] pci_bus 0000:00: resource 13 [mem 0x7e200000-0xfeafffff window]
[ 0.816758] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.816758] pci_bus 0000:01: resource 1 [mem 0x7e200000-0x7e3fffff]
[ 0.816759] pci_bus 0000:01: resource 2 [mem 0x7e400000-0x7e5fffff 64bit pref]
[ 0.816760] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7dfffff]
[ 0.816760] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.816761] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.816762] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.816839] NET: Registered protocol family 2
[ 0.821248] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.828477] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.835108] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.841642] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.847647] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.854103] NET: Registered protocol family 1
[ 0.858466] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.912076] PCI: CLS 64 bytes, default 64
[ 0.912084] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.918522] software IO TLB [mem 0x73800000-0x77800000] (64MB) mapped at [ffff9ee0b3800000-ffff9ee0b77fffff]
[ 0.928488] Scanning for low memory corruption every 60 seconds
[ 0.934568] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 0.941480] zbud: loaded
[ 0.944201] fuse init (API version 7.26)
[ 0.949148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.956543] io scheduler noop registered
[ 0.960466] io scheduler deadline registered (default)
[ 0.965604] io scheduler mq-deadline registered (default)
[ 0.971261] intel_idle: MWAIT substates: 0x42120
[ 0.971262] intel_idle: v0.4.1 model 0x3C
[ 0.971339] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.971369] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.979730] ACPI: Power Button [PWRB]
[ 0.983417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.990829] ACPI: Power Button [PWRF]
[ 0.995065] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.007330] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.012987] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.017442] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.023101] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.029208] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.034860] ACPI: Thermal Zone [THRM] (36 C)
[ 1.039233] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 1.066044] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.074458] Non-volatile memory driver v1.3
[ 1.078680] [drm:drm_core_init] Initialized
[ 1.078776] [drm:intel_detect_pch] Found LynxPoint PCH
[ 1.078779] [drm:intel_power_domains_init] Allowed DC state mask 00
[ 1.078814] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0412 rev=0x06
[ 1.078815] [drm:intel_device_info_dump] i915 device info: is_mobile: no
[ 1.078817] [drm:intel_device_info_dump] i915 device info: is_lp: no
[ 1.078818] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no
[ 1.078819] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no
[ 1.078820] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes
[ 1.078821] [drm:intel_device_info_dump] i915 device info: has_csr: no
[ 1.078822] [drm:intel_device_info_dump] i915 device info: has_ddi: yes
[ 1.078824] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes
[ 1.078825] [drm:intel_device_info_dump] i915 device info: has_reset_engine: no
[ 1.078826] [drm:intel_device_info_dump] i915 device info: has_fbc: yes
[ 1.078827] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes
[ 1.078828] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes
[ 1.078829] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no
[ 1.078830] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no
[ 1.078832] [drm:intel_device_info_dump] i915 device info: has_guc: no
[ 1.078833] [drm:intel_device_info_dump] i915 device info: has_guc_ct: no
[ 1.078834] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes
[ 1.078835] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes
[ 1.078836] [drm:intel_device_info_dump] i915 device info: has_llc: yes
[ 1.078837] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no
[ 1.078838] [drm:intel_device_info_dump] i915 device info: has_logical_ring_preemption: no
[ 1.078840] [drm:intel_device_info_dump] i915 device info: has_overlay: no
[ 1.078841] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no
[ 1.078842] [drm:intel_device_info_dump] i915 device info: has_psr: yes
[ 1.078843] [drm:intel_device_info_dump] i915 device info: has_rc6: yes
[ 1.078844] [drm:intel_device_info_dump] i915 device info: has_rc6p: no
[ 1.078845] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes
[ 1.078847] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes
[ 1.078848] [drm:intel_device_info_dump] i915 device info: has_snoop: no
[ 1.078849] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no
[ 1.078850] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no
[ 1.078851] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no
[ 1.078852] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no
[ 1.078853] [drm:intel_device_info_dump] i915 device info: supports_tv: no
[ 1.078854] [drm:i915_driver_load] i915 device info: has_ipc: no
[ 1.078864] [drm:__intel_uncore_early_sanitize] unclaimed mmio detected on uncore init, clearing
[ 1.078907] [drm] PipeC fused off
[ 1.082226] [drm:intel_device_info_runtime_init] slice mask: 0000
[ 1.082228] [drm:intel_device_info_runtime_init] slice total: 0
[ 1.082229] [drm:intel_device_info_runtime_init] subslice total: 0
[ 1.082230] [drm:intel_device_info_runtime_init] subslice mask 0000
[ 1.082231] [drm:intel_device_info_runtime_init] subslice per slice: 0
[ 1.082232] [drm:intel_device_info_runtime_init] EU total: 0
[ 1.082234] [drm:intel_device_info_runtime_init] EU per subslice: 0
[ 1.082235] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 1.082236] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 1.082237] [drm:i915_driver_load] has EU power gating: n
[ 1.082238] [drm:i915_driver_load] ppgtt mode: 1
[ 1.082238] [drm:i915_driver_load] use GPU semaphores? yes
[ 1.082244] [drm] Memory usable by graphics device = 2048M
[ 1.087729] [drm:i915_ggtt_probe_hw] GMADR size = 256M
[ 1.087729] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M
[ 1.087730] [drm] Replacing VGA console driver
[ 1.093139] Console: switching to colour dummy device 80x25
[ 1.098843] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
[ 1.098848] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7a878018
[ 1.098852] [drm:intel_opregion_setup] Public ACPI methods supported
[ 1.098853] [drm:intel_opregion_setup] SWSCI supported
[ 1.104876] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[ 1.104877] [drm:intel_opregion_setup] ASLE supported
[ 1.104878] [drm:intel_opregion_setup] ASLE extension supported
[ 1.104879] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
[ 1.104904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.111518] [drm] Driver supports precise vblank timestamp query.
[ 1.117611] [drm:intel_bios_init] Set default to SSC at 120000 kHz
[ 1.117612] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 170
[ 1.117614] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.117615] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[ 1.119665] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
[ 1.119668] [drm:intel_bios_init] Panel type: 2 (VBT)
[ 1.119669] [drm:intel_bios_init] DRRS supported mode is static
[ 1.119672] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
[ 1.119676] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.119677] [drm:intel_bios_init] VBT initial LVDS value 300
[ 1.119679] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
[ 1.119680] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
[ 1.119682] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.119683] [drm:intel_bios_init] DRRS State Enabled:1
[ 1.119684] [drm:intel_bios_init] No SDVO device info is found in VBT
[ 1.119685] [drm:intel_bios_init] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.119686] [drm:intel_bios_init] VBT HDMI level shift for port B: 11
[ 1.119701] [drm:intel_dsm_detect] no _DSM method for intel device
[ 1.119705] [drm:i915_driver_load] rawclk rate: 125000 kHz
[ 1.119707] [drm:intel_power_well_enable] enabling always-on
[ 1.119709] [drm:intel_power_well_enable] enabling display
[ 1.119712] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.129189] [drm:drm_irq_install] irq=24
[ 1.129278] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
[ 1.129280] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 1.129281] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
[ 1.129282] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
[ 1.129282] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
[ 1.129283] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 1.129284] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 1.129285] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
[ 1.129286] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
[ 1.129286] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
[ 1.129287] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 1.129288] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 1.129288] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
[ 1.129289] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
[ 1.129290] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
[ 1.129291] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 1.129292] [drm:intel_modeset_init] 2 display pipes available.
[ 1.129307] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
[ 1.129308] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
[ 1.129309] [drm:intel_modeset_init] Max dotclock rate: 540000 kHz
[ 1.129617] [drm:intel_crt_reset] crt adpa set to 0x80f40010
[ 1.129620] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
[ 1.129621] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT)
[ 1.129837] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
[ 1.129838] [drm:intel_modeset_setup_hw_state] [CRTC:37:pipe A] hw state readout: enabled
[ 1.129840] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
[ 1.129841] [drm:intel_modeset_setup_hw_state] [CRTC:47:pipe B] hw state readout: disabled
[ 1.129842] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.129843] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.129845] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000001, on 1
[ 1.129846] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
[ 1.129847] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
[ 1.129848] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
[ 1.129867] [drm:intel_modeset_setup_hw_state] [ENCODER:49:CRT] hw state readout: enabled, pipe A
[ 1.129868] [drm:intel_modeset_setup_hw_state] [ENCODER:50:DDI B] hw state readout: disabled, pipe A
[ 1.129869] [drm:intel_modeset_setup_hw_state] [CONNECTOR:48:VGA-1] hw state readout: enabled
[ 1.129871] [drm:drm_mode_object_put] OBJ ID: 48 (2)
[ 1.129873] [drm:intel_modeset_setup_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled
[ 1.129873] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.129877] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:720x400] for CRTC state ffff9ee14028d800
[ 1.129879] [drm:drm_calc_timestamping_constants] crtc 37: hwmode: htotal 900, vtotal 449, vdisplay 400
[ 1.129880] [drm:drm_calc_timestamping_constants] crtc 37: clock 28323 kHz framedur 14267556 linedur 31776
[ 1.129886] [drm:intel_dump_pipe_config] [CRTC:37:pipe A][setup_hw_state]
[ 1.129887] [drm:intel_dump_pipe_config] output_types: ANALOG (0x2)
[ 1.129888] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 24, dithering: 0
[ 1.129889] [drm:intel_dump_pipe_config] fdi: lanes: 1; gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
[ 1.129890] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.129890] [drm:intel_dump_pipe_config] requested mode:
[ 1.129893] [drm:drm_mode_debug_printmodeline] Modeline 0:"720x400" 70 28323 720 738 846 900 400 413 415 449 0x40 0x6
[ 1.129893] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.129895] [drm:drm_mode_debug_printmodeline] Modeline 0:"720x400" 70 28323 720 738 846 900 400 413 415 449 0x40 0x6
[ 1.129896] [drm:intel_dump_pipe_config] crtc timings: 28323 720 738 846 900 400 413 415 449, type: 0x40 flags: 0x6
[ 1.129897] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 28323
[ 1.129898] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
[ 1.129899] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
[ 1.129900] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
[ 1.129900] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.129901] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
[ 1.129902] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
[ 1.129903] [drm:intel_dump_pipe_config] [PLANE:34:cursor A] disabled, scaler_id = 0
[ 1.129904] [drm:intel_dump_pipe_config] [CRTC:47:pipe B][setup_hw_state]
[ 1.129904] [drm:intel_dump_pipe_config] output_types: (0x0)
[ 1.129905] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[ 1.129906] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.129907] [drm:intel_dump_pipe_config] requested mode:
[ 1.129908] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.129909] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.129910] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.129912] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.129912] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
[ 1.129913] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.129914] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
[ 1.129915] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1.129915] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.129916] [drm:intel_dump_pipe_config] [PLANE:38:primary B] disabled, scaler_id = 0
[ 1.129917] [drm:intel_dump_pipe_config] [PLANE:41:sprite B] disabled, scaler_id = 0
[ 1.129917] [drm:intel_dump_pipe_config] [PLANE:44:cursor B] disabled, scaler_id = 0
[ 1.129918] [drm:drm_mode_object_get] OBJ ID: 48 (2)
[ 1.129919] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.129920] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.129921] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling
[ 1.129922] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling
[ 1.129923] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling
[ 1.129929] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee1403ba000
[ 1.129930] [drm:drm_mode_object_get] OBJ ID: 55 (1)
[ 1.129931] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee140bab800 state to ffff9ee1403ba000
[ 1.129933] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee140bac800 state to ffff9ee1403ba000
[ 1.129935] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee140a23800 state to ffff9ee1403ba000
[ 1.129937] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee140a23a00 state to ffff9ee1403ba000
[ 1.129938] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee140a23b00 state to ffff9ee1403ba000
[ 1.129939] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee140a23c00 state to ffff9ee1403ba000
[ 1.129940] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee140a23100 state to ffff9ee1403ba000
[ 1.129942] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee140a23000 state to ffff9ee1403ba000
[ 1.129943] [drm:drm_mode_object_get] OBJ ID: 48 (3)
[ 1.129944] [drm:drm_mode_object_get] OBJ ID: 48 (4)
[ 1.129945] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:48:VGA-1] ffff9ee14063b580 state to ffff9ee1403ba000
[ 1.129946] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.129947] [drm:drm_mode_object_get] OBJ ID: 51 (2)
[ 1.129948] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:51:HDMI-A-1] ffff9ee14063b800 state to ffff9ee1403ba000
[ 1.129949] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.129950] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.129951] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.129953] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:48:VGA-1]
[ 1.129955] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:48:VGA-1] keeps [ENCODER:49:CRT], now on [CRTC:37:pipe A]
[ 1.129956] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:51:HDMI-A-1]
[ 1.129957] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:51:HDMI-A-1]
[ 1.129963] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee1403ba000
[ 1.129963] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.129964] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.129965] [drm:drm_mode_object_put] OBJ ID: 51 (2)
[ 1.129965] [drm:drm_mode_object_put] OBJ ID: 55 (2)
[ 1.129967] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee1403ba000
[ 1.129969] [drm:intel_uc_fw_fetch] GuC fw fetch (null)
[ 1.129971] [drm:intel_uc_fw_fetch] GuC fw fetch (null)
[ 1.130162] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000]
[ 1.131302] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
[ 1.131303] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
[ 1.131307] [drm:i915_gem_contexts_init] logical context support initialized
[ 1.131475] [drm:intel_engine_init_common] rcs0 hws offset: 0x7fdee000
[ 1.131482] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fded000
[ 1.131644] [drm:intel_engine_init_common] bcs0 hws offset: 0x7fdec000
[ 1.131856] [drm:intel_engine_init_common] vcs0 hws offset: 0x7fdeb000
[ 1.131942] [drm:intel_engine_init_common] vecs0 hws offset: 0x7fdea000
[ 1.131969] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
[ 1.132013] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 1a) mailbox access failed for intel_init_gt_powersave: -6
[ 1.132015] [drm:intel_init_gt_powersave] Overclocking supported, max: 1150MHz, overclock: 1150MHz
[ 1.132028] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
[ 1.132029] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
[ 1.132030] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
[ 1.132032] [drm:drm_mode_object_get] OBJ ID: 48 (3)
[ 1.132033] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.132033] [drm:drm_mode_object_get] OBJ ID: 51 (2)
[ 1.132034] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.132040] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.132040] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.132042] [drm:drm_minor_register]
[ 1.132043] [drm:drm_minor_register]
[ 1.132062] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.132063] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.132065] [drm:intel_crt_detect] [CONNECTOR:48:VGA-1] force=0
[ 1.132067] [drm:intel_crt_detect] trigger hotplug detect cycle: adpa=0x80f40010
[ 1.132110] [drm:drm_minor_register] new minor registered 128
[ 1.132111] [drm:drm_minor_register]
[ 1.132165] [drm:drm_minor_register] new minor registered 0
[ 1.132182] [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
[ 1.132183] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.132188] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.132195] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
[ 1.132196] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.132199] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.132200] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.139372] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.139373] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.139375] [drm:intel_opregion_register] 2 outputs detected
[ 1.139375] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.139376] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.140327] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.141497] [drm:intel_crt_detect] ironlake hotplug adpa=0x80f40010, result 0
[ 1.141499] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.143543] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.143544] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[ 1.145586] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.145588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.145589] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.145590] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.146414] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.146415] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.146416] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.146418] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:VGA-1] status updated from unknown to disconnected
[ 1.146419] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.146421] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
[ 1.147518] [drm:asle_work] bclp = 0x80000002
[ 1.147627] acpi device:63: registered as cooling_device9
[ 1.148464] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.148465] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.150507] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.150508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.152551] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.152552] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.153073] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.154595] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.154597] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
[ 1.154599] [drm:drm_helper_hpd_irq_event] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected
[ 1.154600] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.154602] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 1.154619] [drm:asle_work] updating opregion backlight 2/255
[ 1.154621] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.154621] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.154623] [drm:asle_work] No request on ASLC interrupt 0x00000000
[ 1.162277] [drm:drm_setup_crtcs]
[ 1.162279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1]
[ 1.162281] [drm:intel_crt_detect] [CONNECTOR:48:VGA-1] force=1
[ 1.162284] [drm:intel_crt_detect] ironlake hotplug adpa=0x80f40010, result 0
[ 1.162285] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.162452] ahci 0000:00:1f.2: version 3.0
[ 1.162578] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
[ 1.164038] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.164039] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[ 1.166078] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.166079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.166081] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.166082] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.166906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.166907] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.166908] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.166910] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.166911] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.166912] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1] disconnected
[ 1.166913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
[ 1.166915] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
[ 1.168036] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.168037] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.170077] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.170079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.170764] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
[ 1.172039] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.172040] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.174081] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.174084] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
[ 1.174085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
[ 1.174087] [drm:drm_setup_crtcs] No connectors reported connected with modes
[ 1.174088] [drm:drm_setup_crtcs] connector 48 enabled? no
[ 1.174089] [drm:drm_setup_crtcs] connector 51 enabled? no
[ 1.174091] [drm:intel_fb_initial_config] Not using firmware configuration
[ 1.174093] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[ 1.174094] [drm] Cannot find any crtc or sizes - going 1024x768
[ 1.174095] [drm:intelfb_create] no BIOS fb, allocating a new one
[ 1.174287] [drm:intelfb_create] allocated 1024x768 fb: 0x00081000
[ 1.183920] fbcon: inteldrmfb (fb0) is primary device
[ 1.183953] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee1401cf800
[ 1.183955] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee1405c3600 state to ffff9ee1401cf800
[ 1.183956] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee1405c3500 state to ffff9ee1401cf800
[ 1.183958] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3500 to [NOCRTC]
[ 1.183959] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3500
[ 1.183960] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee1405c3200 state to ffff9ee1401cf800
[ 1.183961] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3200 to [NOCRTC]
[ 1.183962] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3200
[ 1.183963] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee1405c3800 state to ffff9ee1401cf800
[ 1.183965] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee1405c3a00 state to ffff9ee1401cf800
[ 1.183966] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3a00 to [NOCRTC]
[ 1.183967] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3a00
[ 1.183968] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee1405c3b00 state to ffff9ee1401cf800
[ 1.183969] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3b00 to [NOCRTC]
[ 1.183970] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3b00
[ 1.183971] [drm:drm_mode_object_get] OBJ ID: 55 (1)
[ 1.183973] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee1404f8000 state to ffff9ee1401cf800
[ 1.183973] [drm:drm_mode_object_put] OBJ ID: 55 (2)
[ 1.183975] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee1404f8000
[ 1.183976] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3600 to [NOCRTC]
[ 1.183977] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3600
[ 1.183978] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee1401cf800
[ 1.183980] [drm:drm_mode_object_get] OBJ ID: 48 (4)
[ 1.183981] [drm:drm_mode_object_get] OBJ ID: 48 (5)
[ 1.183982] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:48:VGA-1] ffff9ee0b35e1100 state to ffff9ee1401cf800
[ 1.183983] [drm:drm_mode_object_put] OBJ ID: 48 (6)
[ 1.183983] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.183984] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.183985] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff9ee0b35e1100 to [NOCRTC]
[ 1.183987] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee1404f9800 state to ffff9ee1401cf800
[ 1.183988] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee1404f9800
[ 1.183989] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1405c3800 to [NOCRTC]
[ 1.183990] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1405c3800
[ 1.183991] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee1401cf800
[ 1.183992] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.183992] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.183994] [drm:drm_atomic_check_only] checking ffff9ee1401cf800
[ 1.183995] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] mode changed
[ 1.183996] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] enable changed
[ 1.183997] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] active changed
[ 1.183998] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:48:VGA-1]
[ 1.183999] [drm:drm_atomic_helper_check_modeset] Disabling [CONNECTOR:48:VGA-1]
[ 1.184000] [drm:drm_atomic_helper_check_modeset] [CRTC:37:pipe A] needs all connectors, enable: n, active: n
[ 1.184007] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee1401cf800
[ 1.184008] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.184009] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.184010] [drm:drm_mode_object_put] OBJ ID: 48 (5)
[ 1.184010] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.184013] [drm:drm_atomic_commit] committing ffff9ee1401cf800
[ 1.184025] [drm:intel_disable_pipe] disabling pipe A
[ 1.210620] [drm:intel_disable_shared_dpll] disable SPLL (active 1, on? 1) for crtc 37
[ 1.210622] [drm:intel_disable_shared_dpll] disabling SPLL
[ 1.210624] [drm:intel_atomic_commit_tail] [ENCODER:49:CRT]
[ 1.210626] [drm:intel_atomic_commit_tail] [ENCODER:50:DDI B]
[ 1.210628] [drm:verify_connector_state.isra.117] [CONNECTOR:48:VGA-1]
[ 1.210629] [drm:verify_single_dpll_state.isra.118] WRPLL 1
[ 1.210630] [drm:verify_single_dpll_state.isra.118] WRPLL 2
[ 1.210630] [drm:verify_single_dpll_state.isra.118] SPLL
[ 1.210631] [drm:verify_single_dpll_state.isra.118] LCPLL 810
[ 1.210632] [drm:verify_single_dpll_state.isra.118] LCPLL 1350
[ 1.210632] [drm:verify_single_dpll_state.isra.118] LCPLL 2700
[ 1.210635] [drm:intel_power_well_disable] disabling display
[ 1.210636] [drm:drm_mode_object_put] OBJ ID: 55 (1)
[ 1.210638] [drm:intel_atomic_commit_tail] [CRTC:37:pipe A]
[ 1.210640] [drm:intel_power_well_disable] disabling always-on
[ 1.210642] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee1401cf800
[ 1.210643] [drm:drm_mode_object_put] OBJ ID: 48 (4)
[ 1.210644] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.210646] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee1401cf800
[ 1.210647] [drm:drm_fb_helper_hotplug_event]
[ 1.210649] [drm:drm_setup_crtcs]
[ 1.210650] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1]
[ 1.210651] [drm:intel_crt_detect] [CONNECTOR:48:VGA-1] force=1
[ 1.210653] [drm:intel_power_well_enable] enabling always-on
[ 1.210654] [drm:intel_power_well_enable] enabling display
[ 1.210658] [drm:intel_crt_detect] ironlake hotplug adpa=0xf40010, result 0
[ 1.210659] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.212718] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.212719] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[ 1.214773] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[ 1.214774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.214775] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.214776] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.215417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[ 1.215418] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.215419] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.215421] [drm:intel_power_well_disable] disabling display
[ 1.215422] [drm:intel_power_well_disable] disabling always-on
[ 1.215423] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:VGA-1] disconnected
[ 1.215424] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
[ 1.215426] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
[ 1.215427] [drm:intel_power_well_enable] enabling always-on
[ 1.216338] scsi host0: ahci
[ 1.216460] scsi host1: ahci
[ 1.216563] scsi host2: ahci
[ 1.216635] scsi host3: ahci
[ 1.216681] scsi host4: ahci
[ 1.216736] scsi host5: ahci
[ 1.216752] ata1: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a100 irq 25
[ 1.216753] ata2: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a180 irq 25
[ 1.216753] ata3: DUMMY
[ 1.216753] ata4: DUMMY
[ 1.216754] ata5: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a300 irq 25
[ 1.216755] ata6: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a380 irq 25
[ 1.216771] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.216774] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.217446] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.217447] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.219464] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.219465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.221499] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.221500] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.223532] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.223535] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
[ 1.223536] [drm:intel_power_well_disable] disabling always-on
[ 1.223537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
[ 1.223539] [drm:drm_setup_crtcs] No connectors reported connected with modes
[ 1.223540] [drm:drm_setup_crtcs] connector 48 enabled? no
[ 1.223541] [drm:drm_setup_crtcs] connector 51 enabled? no
[ 1.223543] [drm:intel_fb_initial_config] Not using firmware configuration
[ 1.223545] [drm:drm_setup_crtcs] picking CRTCs for 1024x768 config
[ 1.223547] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b36cac00
[ 1.223549] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee14039ff00 state to ffff9ee0b36cac00
[ 1.223550] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee14039f600 state to ffff9ee0b36cac00
[ 1.223551] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f600 to [NOCRTC]
[ 1.223552] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f600
[ 1.223554] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee14039f500 state to ffff9ee0b36cac00
[ 1.223555] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f500 to [NOCRTC]
[ 1.223556] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f500
[ 1.223557] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee14039f200 state to ffff9ee0b36cac00
[ 1.223558] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee14039f800 state to ffff9ee0b36cac00
[ 1.223559] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f800 to [NOCRTC]
[ 1.223560] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f800
[ 1.223562] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee14039fa00 state to ffff9ee0b36cac00
[ 1.223563] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039fa00 to [NOCRTC]
[ 1.223564] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039fa00
[ 1.223565] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee14065e000 state to ffff9ee0b36cac00
[ 1.223566] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee14065e000
[ 1.223567] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039ff00 to [NOCRTC]
[ 1.223568] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039ff00
[ 1.223570] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b36cac00
[ 1.223571] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.223572] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.223573] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee140659000 state to ffff9ee0b36cac00
[ 1.223574] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140659000
[ 1.223575] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f200 to [NOCRTC]
[ 1.223576] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f200
[ 1.223577] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b36cac00
[ 1.223578] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.223579] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.223580] [drm:drm_atomic_check_only] checking ffff9ee0b36cac00
[ 1.223582] [drm:drm_atomic_commit] committing ffff9ee0b36cac00
[ 1.223587] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b36cac00
[ 1.223589] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b36cac00
[ 1.223596] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b36cac00
[ 1.223598] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee14039fb00 state to ffff9ee0b36cac00
[ 1.223599] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee14039fc00 state to ffff9ee0b36cac00
[ 1.223600] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039fc00 to [NOCRTC]
[ 1.223601] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039fc00
[ 1.223602] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee140653300 state to ffff9ee0b36cac00
[ 1.223603] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653300 to [NOCRTC]
[ 1.223604] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653300
[ 1.223606] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee140653700 state to ffff9ee0b36cac00
[ 1.223607] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee140653e00 state to ffff9ee0b36cac00
[ 1.223608] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653e00 to [NOCRTC]
[ 1.223609] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653e00
[ 1.223610] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee140653d00 state to ffff9ee0b36cac00
[ 1.223611] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653d00 to [NOCRTC]
[ 1.223612] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653d00
[ 1.223614] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee14065c000 state to ffff9ee0b36cac00
[ 1.223614] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee14065c000
[ 1.223615] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039fb00 to [NOCRTC]
[ 1.223616] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039fb00
[ 1.223618] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b36cac00
[ 1.223618] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.223619] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.223620] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee14065b000 state to ffff9ee0b36cac00
[ 1.223621] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee14065b000
[ 1.223622] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653700 to [NOCRTC]
[ 1.223623] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653700
[ 1.223624] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b36cac00
[ 1.223625] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.223625] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.223626] [drm:drm_atomic_check_only] checking ffff9ee0b36cac00
[ 1.223628] [drm:drm_atomic_commit] committing ffff9ee0b36cac00
[ 1.223631] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b36cac00
[ 1.223632] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b36cac00
[ 1.224964] Console: switching to colour frame buffer device 128x48
[ 1.224968] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b36cac00
[ 1.224969] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee140653000 state to ffff9ee0b36cac00
[ 1.224970] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee140653100 state to ffff9ee0b36cac00
[ 1.224971] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653100 to [NOCRTC]
[ 1.224972] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653100
[ 1.224973] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee140653c00 state to ffff9ee0b36cac00
[ 1.224974] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653c00 to [NOCRTC]
[ 1.224975] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653c00
[ 1.224977] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee14039fa00 state to ffff9ee0b36cac00
[ 1.224978] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee14039f800 state to ffff9ee0b36cac00
[ 1.224979] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f800 to [NOCRTC]
[ 1.224980] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f800
[ 1.224981] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee14039f200 state to ffff9ee0b36cac00
[ 1.224982] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039f200 to [NOCRTC]
[ 1.224983] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039f200
[ 1.224984] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee140659000 state to ffff9ee0b36cac00
[ 1.224985] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140659000
[ 1.224986] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee140653000 to [NOCRTC]
[ 1.224987] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee140653000
[ 1.224988] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b36cac00
[ 1.224989] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.224990] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.224991] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee14065e000 state to ffff9ee0b36cac00
[ 1.224992] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee14065e000
[ 1.224993] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee14039fa00 to [NOCRTC]
[ 1.224994] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee14039fa00
[ 1.224995] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b36cac00
[ 1.224996] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 1.224996] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 1.224997] [drm:drm_atomic_check_only] checking ffff9ee0b36cac00
[ 1.224999] [drm:drm_atomic_commit] committing ffff9ee0b36cac00
[ 1.225001] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b36cac00
[ 1.225003] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b36cac00
[ 1.228844] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffa74500095000, b8:97:5a:62:36:25, XID 0c000800 IRQ 26
[ 1.228844] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.228851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.228854] ehci-pci: EHCI PCI platform driver
[ 1.228922] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.228925] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.228937] ehci-pci 0000:00:1a.0: debug port 2
[ 1.232835] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.232842] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f1c000
[ 1.244032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.244182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.244183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.244183] usb usb1: Product: EHCI Host Controller
[ 1.244184] usb usb1: Manufacturer: Linux 4.15.0-rc1-i5-dirty ehci_hcd
[ 1.244184] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.244308] hub 1-0:1.0: USB hub found
[ 1.244334] hub 1-0:1.0: 2 ports detected
[ 1.244585] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.244587] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.244599] ehci-pci 0000:00:1d.0: debug port 2
[ 1.248492] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.248499] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1b000
[ 1.260032] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.260184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260186] usb usb2: Product: EHCI Host Controller
[ 1.260187] usb usb2: Manufacturer: Linux 4.15.0-rc1-i5-dirty ehci_hcd
[ 1.260187] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.260304] hub 2-0:1.0: USB hub found
[ 1.260317] hub 2-0:1.0: 2 ports detected
[ 1.260524] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.260527] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.261634] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.261639] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.261823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.261824] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.261825] usb usb3: Product: xHCI Host Controller
[ 1.261826] usb usb3: Manufacturer: Linux 4.15.0-rc1-i5-dirty xhci-hcd
[ 1.261826] usb usb3: SerialNumber: 0000:00:14.0
[ 1.261928] hub 3-0:1.0: USB hub found
[ 1.261950] hub 3-0:1.0: 10 ports detected
[ 1.262544] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.262545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.262606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.262607] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.262607] usb usb4: Product: xHCI Host Controller
[ 1.262608] usb usb4: Manufacturer: Linux 4.15.0-rc1-i5-dirty xhci-hcd
[ 1.262608] usb usb4: SerialNumber: 0000:00:14.0
[ 1.262676] hub 4-0:1.0: USB hub found
[ 1.262684] hub 4-0:1.0: 2 ports detected
[ 1.262846] i8042: PNP: No PS/2 controller found.
[ 1.262925] rtc_cmos 00:02: RTC can wake from S4
[ 1.263067] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.263097] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.263172] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.263188] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.263932] IR NEC protocol handler initialized
[ 1.263932] IR RC5(x/sz) protocol handler initialized
[ 1.263932] IR RC6 protocol handler initialized
[ 1.263933] IR JVC protocol handler initialized
[ 1.263933] IR Sony protocol handler initialized
[ 1.263933] IR SANYO protocol handler initialized
[ 1.263934] IR Sharp protocol handler initialized
[ 1.263934] IR MCE Keyboard/mouse protocol handler initialized
[ 1.263934] IR XMP protocol handler initialized
[ 1.263935] saa7146: register extension 'budget_av'
[ 1.266079] it87: Found IT8728F chip at 0xa30, revision 1
[ 1.266109] it87: Beeping is supported
[ 1.266115] ACPI Warning: SystemIO range 0x0000000000000A35-0x0000000000000A36 conflicts with OpRegion 0x0000000000000A35-0x0000000000000A36 (\SENP) (20170831/utaddress-247)
[ 1.266119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.275863] intel_pstate: Intel P-state driver initializing
[ 1.283249] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.283282] usbcore: registered new interface driver usbhid
[ 1.283282] usbhid: USB HID core driver
[ 1.284107] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
[ 1.284114] [drm:intel_power_well_enable] enabling always-on
[ 1.284119] [drm:intel_power_well_enable] enabling display
[ 1.289039] microcode: sig=0x306c3, pf=0x2, revision=0x22
[ 1.292755] snd_hda_codec_generic hdaudioC1D2: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 1.292756] snd_hda_codec_generic hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.292756] snd_hda_codec_generic hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.292757] snd_hda_codec_generic hdaudioC1D2: mono: mono_out=0x0
[ 1.292758] snd_hda_codec_generic hdaudioC1D2: dig-out=0x1e/0x0
[ 1.292758] snd_hda_codec_generic hdaudioC1D2: inputs:
[ 1.292759] snd_hda_codec_generic hdaudioC1D2: Front Mic=0x19
[ 1.292760] snd_hda_codec_generic hdaudioC1D2: Rear Mic=0x18
[ 1.292760] snd_hda_codec_generic hdaudioC1D2: Line=0x1a
[ 1.296352] microcode: Microcode Update Driver: v2.2.
[ 1.296369] sched_clock: Marking stable (1296347896, 0)->(1476325330, -179977434)
[ 1.300090] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 1.300091] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.300092] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.300092] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 1.300093] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x0
[ 1.300093] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 1.300520] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
[ 1.302773] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 1.302803] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 1.302830] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.302856] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.302881] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 1.355445] zswap: loaded using pool lzo/zbud
[ 1.386690] Magic number: 9:19:377
[ 1.390986] rtc_cmos 00:02: setting system clock to 2017-11-28 10:21:35 UTC (1511864495)
[ 1.528715] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.528797] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.530637] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.530698] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.531865] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 1.531866] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.533256] ata1.00: configured for UDMA/133
[ 1.584028] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.596036] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.740413] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.740414] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.740667] hub 1-1:1.0: USB hub found
[ 1.740774] hub 1-1:1.0: 4 ports detected
[ 1.752406] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.752407] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.752573] hub 2-1:1.0: USB hub found
[ 1.752683] hub 2-1:1.0: 6 ports detected
[ 1.948033] tsc: Refined TSC clocksource calibration: 3192.605 MHz
[ 1.948036] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e05005e26b, max_idle_ns: 440795310808 ns
[ 2.023981] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.030346] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 2.038894] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.046581] sd 0:0:0:0: [sda] Write Protect is off
[ 2.051386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.051477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.113646] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.119373] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.135639] PM: Image not found (code -22)
[ 2.135641] ALSA device list:
[ 2.138616] #0: HDA Intel HDMI at 0xf7f14000 irq 28
[ 2.143666] #1: HDA Intel PCH at 0xf7f10000 irq 29
[ 2.154492] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[ 2.162576] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 2.207435] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.215099] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.253726] devtmpfs: mounted
[ 2.256996] Freeing unused kernel memory: 836K
[ 2.261440] Write protecting the kernel read-only data: 12288k
[ 2.267533] Freeing unused kernel memory: 1892K
[ 2.273936] Freeing unused kernel memory: 1588K
[ 2.283321] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.812133] [drm:intel_enable_gt_powersave] Enabling RC6 states: RC6 on
[ 2.812138] [drm:sandybridge_pcode_read] warning: pcode (read from mbox 5) mailbox access failed for intel_enable_gt_powersave: -6
[ 2.972157] clocksource: Switched to clocksource tsc
[ 3.257153] systemd[1]: Failed to insert module 'autofs4': Function not implemented
[ 3.264833] systemd[1]: Failed to insert module 'ipv6': Function not implemented
[ 3.320295] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.356251] systemd[1]: Detected architecture x86-64.
[ 3.409411] systemd[1]: Set hostname to <maggie>.
[ 4.750139] systemd[1]: nss-lookup.target: Dependency Before=nss-lookup.target dropped
[ 4.766416] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 4.775300] systemd[1]: [/usr/lib/systemd/system/rpcbind.socket:14] Failed to parse address value, ignoring: [::]:111
[ 4.785905] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 4.794769] systemd[1]: [/usr/lib/systemd/system/rpcbind.socket:15] Failed to parse address value, ignoring: [::]:111
[ 4.815800] systemd[1]: Created slice User and Session Slice.
[ 4.836176] systemd[1]: Listening on udev Control Socket.
[ 5.347821] random: crng init done
[ 5.901086] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 5.938817] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b2cc9800
[ 5.938822] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee0b2c56000 state to ffff9ee0b2cc9800
[ 5.938827] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee0b2c5f900 state to ffff9ee0b2cc9800
[ 5.938830] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c5f900 to [NOCRTC]
[ 5.938833] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c5f900
[ 5.938836] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee0b2c5f400 state to ffff9ee0b2cc9800
[ 5.938839] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c5f400 to [NOCRTC]
[ 5.938841] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c5f400
[ 5.938844] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee0b2c5fd00 state to ffff9ee0b2cc9800
[ 5.938848] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee0b2c5fe00 state to ffff9ee0b2cc9800
[ 5.938850] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c5fe00 to [NOCRTC]
[ 5.938852] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c5fe00
[ 5.938856] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee0b2c5f800 state to ffff9ee0b2cc9800
[ 5.938858] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c5f800 to [NOCRTC]
[ 5.938860] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c5f800
[ 5.938865] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee140ba9800 state to ffff9ee0b2cc9800
[ 5.938868] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140ba9800
[ 5.938871] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c56000 to [NOCRTC]
[ 5.938873] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c56000
[ 5.938877] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b2cc9800
[ 5.938880] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 5.938882] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 5.938886] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee140ba8800 state to ffff9ee0b2cc9800
[ 5.938888] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140ba8800
[ 5.938891] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2c5fd00 to [NOCRTC]
[ 5.938893] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2c5fd00
[ 5.938896] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b2cc9800
[ 5.938898] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 5.938899] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 5.938902] [drm:drm_atomic_check_only] checking ffff9ee0b2cc9800
[ 5.938910] [drm:drm_atomic_commit] committing ffff9ee0b2cc9800
[ 5.938923] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b2cc9800
[ 5.938928] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b2cc9800
[ 6.207624] systemd-journald[122]: Received request to flush runtime journal from PID 1
[ 7.107775] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b205c800
[ 7.107777] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee0ad82fd00 state to ffff9ee0b205c800
[ 7.107779] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee1407cb300 state to ffff9ee0b205c800
[ 7.107780] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee1407cb300 to [NOCRTC]
[ 7.107781] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee1407cb300
[ 7.107783] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee0b20dd500 state to ffff9ee0b205c800
[ 7.107784] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b20dd500 to [NOCRTC]
[ 7.107785] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b20dd500
[ 7.107786] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee0b20ddb00 state to ffff9ee0b205c800
[ 7.107788] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee0b20dd100 state to ffff9ee0b205c800
[ 7.107789] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b20dd100 to [NOCRTC]
[ 7.107789] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b20dd100
[ 7.107791] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee0b20ddd00 state to ffff9ee0b205c800
[ 7.107792] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b20ddd00 to [NOCRTC]
[ 7.107793] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b20ddd00
[ 7.107795] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee140baf800 state to ffff9ee0b205c800
[ 7.107796] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140baf800
[ 7.107797] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0ad82fd00 to [NOCRTC]
[ 7.107798] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0ad82fd00
[ 7.107799] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b205c800
[ 7.107801] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.107802] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.107804] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee140bad800 state to ffff9ee0b205c800
[ 7.107805] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee140bad800
[ 7.107805] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b20ddb00 to [NOCRTC]
[ 7.107806] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b20ddb00
[ 7.107808] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b205c800
[ 7.107808] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.107809] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.107810] [drm:drm_atomic_check_only] checking ffff9ee0b205c800
[ 7.107814] [drm:drm_atomic_commit] committing ffff9ee0b205c800
[ 7.107821] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b205c800
[ 7.107823] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b205c800
[ 7.109139] [drm:drm_atomic_state_init] Allocated atomic state ffff9ee0b20da400
[ 7.109141] [drm:drm_atomic_get_plane_state] Added [PLANE:28:primary A] ffff9ee0b2133e00 state to ffff9ee0b20da400
[ 7.109143] [drm:drm_atomic_get_plane_state] Added [PLANE:31:sprite A] ffff9ee0b2133000 state to ffff9ee0b20da400
[ 7.109144] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2133000 to [NOCRTC]
[ 7.109145] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2133000
[ 7.109146] [drm:drm_atomic_get_plane_state] Added [PLANE:34:cursor A] ffff9ee0b2133c00 state to ffff9ee0b20da400
[ 7.109147] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2133c00 to [NOCRTC]
[ 7.109148] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2133c00
[ 7.109149] [drm:drm_atomic_get_plane_state] Added [PLANE:38:primary B] ffff9ee0b2133a00 state to ffff9ee0b20da400
[ 7.109150] [drm:drm_atomic_get_plane_state] Added [PLANE:41:sprite B] ffff9ee0b2133200 state to ffff9ee0b20da400
[ 7.109151] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2133200 to [NOCRTC]
[ 7.109152] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2133200
[ 7.109153] [drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor B] ffff9ee0b2131400 state to ffff9ee0b20da400
[ 7.109154] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2131400 to [NOCRTC]
[ 7.109155] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2131400
[ 7.109157] [drm:drm_atomic_get_crtc_state] Added [CRTC:37:pipe A] ffff9ee1407b2800 state to ffff9ee0b20da400
[ 7.109158] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee1407b2800
[ 7.109159] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2133e00 to [NOCRTC]
[ 7.109160] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2133e00
[ 7.109161] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:37:pipe A] to ffff9ee0b20da400
[ 7.109162] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.109162] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.109164] [drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe B] ffff9ee1407b6800 state to ffff9ee0b20da400
[ 7.109165] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff9ee1407b6800
[ 7.109166] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff9ee0b2133a00 to [NOCRTC]
[ 7.109167] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff9ee0b2133a00
[ 7.109168] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe B] to ffff9ee0b20da400
[ 7.109168] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.109169] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.109170] [drm:drm_atomic_check_only] checking ffff9ee0b20da400
[ 7.109172] [drm:drm_atomic_commit] committing ffff9ee0b20da400
[ 7.109177] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff9ee0b20da400
[ 7.109178] [drm:__drm_atomic_state_free] Freeing atomic state ffff9ee0b20da400
[ 7.332022] [drm:asle_work] bclp = 0x800000ff
[ 7.332024] [drm:asle_work] updating opregion backlight 255/255
[ 7.332027] [drm:drm_mode_object_put] OBJ ID: 48 (3)
[ 7.332028] [drm:drm_mode_object_put] OBJ ID: 51 (3)
[ 7.814641] Adding 2097148k swap on /dev/sda1. Priority:42 extents:1 across:2097148k FS
[ 8.257995] EXT4-fs (sda5): barriers disabled
[ 8.263648] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 8.414813] EXT4-fs (sda6): barriers disabled
[ 8.430134] EXT4-fs (sda6): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 9.920094] [drm:intel_power_well_disable] disabling display
[ 9.920097] [drm:intel_power_well_disable] disabling always-on
[ 11.710525] r8169 0000:03:00.0 eth0: link down
[ 13.309560] r8169 0000:03:00.0 eth0: link up

Next message: Greg Kroah-Hartman: "[PATCH 4.4 33/96] ALSA: usb-audio: Add sanity checks to FE parser"
Previous message: Greg Kroah-Hartman: "[PATCH 4.4 18/96] MIPS: Fix an n32 core file generation regset support regression"
In reply to: Maarten Lankhorst: "Re: v4.14/v4.15-rc1: deferred setup in drm/fb-helper breaks entering pc3"
Next in thread: Maarten Lankhorst: "[PATCH] drm/fb_helper: Disable all crtc's when initial setup fails."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]