[PATCH net] net: phylink: fix link state on phy-connect

[Antoine Tenart]

From: Yan Markman <ymarkman@xxxxxxxxxxx>

When calling successively _connect, _disconnect and _connect again, if
the link configuration changed whilst being down from the phylink
perspective, the last _connect would stay in an incorrect old speed.
Fixes this by setting the link configuration parameters to an unknown
value when calling phylink_bringup_phy.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Yan Markman <ymarkman@xxxxxxxxxxx>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
 drivers/net/phy/phylink.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e3bbc70372d3..c2cec3eef67d 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -621,6 +621,16 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 	if (ret)
 		return ret;
 
+	/* On _disconnect, the phy state machine and phylink resolve
+	 * are stopped before executing full gracefull down/reset state.
+	 * The further _connect starts with incorrect init state. Let's set
+	 * init values here.
+	 */
+	pl->phy_state.link = false;
+	pl->link_config.pause = MLO_PAUSE_AN;
+	pl->link_config.speed = SPEED_UNKNOWN;
+	pl->link_config.duplex = DUPLEX_UNKNOWN;
+
 	phy->phylink = pl;
 	phy->phy_link_change = phylink_phy_change;
 
-- 
2.14.3