[PATCH v2 6/8] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin

From: Andrew F. Davis
Date: Wed Nov 29 2017 - 12:15:35 EST

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards")

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7812fbac963c..1b465e5a06cf 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -337,7 +337,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};

accel@1c {
@@ -525,7 +525,7 @@
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};

touchscreen@20 {
--
2.15.0