[PATCH] scsi: ufs: ufshcd: Enable no_write_same for scsi host

[Bjorn Andersson]

Occasionally the following error message can be seen in the logs of
Qualcomm devices using UFS:

EXT4-fs (sda9): Delayed block allocation failed for inode 685600 at logical offset 1086 with max blocks 3 with error 121
EXT4-fs (sda9): This should not happen!! Data will be lost

This is caused by a failing WRITE_SAME command, which per the JEDEC UFS
specification is not a supported. Set the no_write_same flag on the
ufshcd SCSI host to let the SCSI layer know this.

Fixes: 7a3e97b0dc4b ("[SCSI] ufshcd: UFS Host controller driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 drivers/scsi/ufs/ufshcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 88c086f5c4e3..e5b1efd1dafd 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6515,6 +6515,7 @@ static struct scsi_host_template ufshcd_driver_template = {
 	.can_queue		= UFSHCD_CAN_QUEUE,
 	.max_host_blocked	= 1,
 	.track_queue_depth	= 1,
+	.no_write_same		= 1,
 };
 
 static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
-- 
2.15.0