RE: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()

[Yoshihiro Shimoda]

Hi,

> From: Ulf Hansson, Sent: Friday, December 1, 2017 6:22 PM
> 
> + Kishon
> 
> On 30 November 2017 at 13:51, Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
> > Hi,
> >
> >> From: Ulf Hansson, Sent: Wednesday, November 29, 2017 6:59 PM
> >>
> >> On 29 November 2017 at 10:43, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> >> > Hi Ulf,
> > <snip>
> >> Okay, so the problem remains no matter which solution for wakeup you
> >> pick in genpd.
> >
> > Yes. Today I could reproduce this issue without usb host driver.
> > - The renesas_usb3 usb peripheral driver has generic phy handling.
> >   (The peripheral driver uses different generic phy driver (phy-rcar-gen3-usb3.c) though.)
> >  --> If I used the current renesas_usb3 (this means doesn't call phy_power_{on,off}(),
> >      the issue didn't happen.
> >  --> If I added phy_power_{on,off}() calling, the issue happened.
> >   --> So, I'm thinking the APIs are related to the issue.
> 
> Yes.
> 
> >
> > - The generic phy APIs are in drivers/phy/phy-core.c.
> >  --> The phy-rcar-gen3-usb[23] drivers call only pm_runtime_enable() before devm_phy_create().
> >   --> The phy-core will call pm_runtime_{get_sync,put}() in phy_{init,exit,power_{on,off}}.
> >    --> So, IIUC, both devices of phy-<dev_name>.<id> and <dev_name> will be handled by runtime PM APIs.
> >  --> The runtime PM implementation of phy-core seems good to me. But...?
> 
> 
> I have digested the information that you and Geert provided, thanks!
> 
> So, my conclusions so far is:
> 
> The phy core is using runtime PM reference counting at
> phy_power_on|off(). Although it does that on the phy core device,
> which is a child device of the phy provider device.
> 
> Because phy_power_off() is called during system suspend from phy
> consumer drivers like usb, the phy core device (child) and the phy
> provider device (parent) will never become runtime suspended (because
> the PM core has invoked pm_runtime_get_no_resume() for all device in
> the device prepare phase).
> 
> Then, when genpd calls pm_runtime_force_suspend() at the suspend noirq
> phase for the phy provider device, the call to
> pm_runtime_set_suspended() in there, triggers the earlier error
> message, which is because the child (phy core device) is still runtime
> resumed.

Thank you very much for the conclusions!
It's helpful to me about runtime PM behavior.

> >> Then this seems to point to that the driver may be misbehaving in some
> >> way. I can help to check what is going on.
> >
> > I guess so. But, I don't find yet...
> 
> I think the below patch will help, although I am not sure if that is
> sufficient as a long term fix.

Thank you very much for your help!
Also, I'm not sure how to fix for a long term kernels though...

> Can you please try and see if it solves the problems?

Sure! I tested your patch, and then the following message disappeared!

   Enabling runtime PM for inactive device (ee080200.usb-phy) with active children

However, the following message still exists.

   Enabling runtime PM for inactive device (ee080000.usb) with active children

So, I guess ohci-platform.c also has similar issue.

JFYI, the ehci-platform.c doesn't have runtime PM handling.
So, I think that error message doesn't output from ehci devices.

Best regards,
Yoshihiro Shimoda