Re: [PATCH 1/8] ARM: dts: imx7d-sbc-iot: add initial iot gateway dts

From: Fabio Estevam
Date: Fri Dec 01 2017 - 15:10:22 EST


On Thu, Nov 30, 2017 at 6:14 PM, <tyler@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

> +&ecspi3 {
> + fsl,spi-num-chipselects = <1>;

Please remove this property. It is no longer used.


> + dvicape@39 {
> + compatible = "sil164_simple";

This compatible string does not exist.



> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display {
> + bits-per-pixel = <24>;
> + bus-width = <24>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: dvi {
> + /* 1024x768p60 */
> + clock-frequency = <65000000>;
> + hactive = <1024>;
> + hfront-porch = <40>;
> + hback-porch = <220>;
> + hsync-len = <60>;
> + vactive = <768>;
> + vfront-porch = <7>;
> + vback-porch = <21>;
> + vsync-len = <10>;
> +
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;

Which panel is this? Could you use a simple panel driver compatible
string instead?


> + };
> + };
> + };
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + fsl,uart-has-rtscts;

Please use 'uart-has-rtscts' instead.

> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + fsl,uart-has-rtscts;

Ditto.

> + status = "okay";
> +};
> +
> +&uart7 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart7>;
> + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + fsl,uart-has-rtscts;

Ditto