Re: [PATCH 2/2] regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC

[Erick Chen]

Hi Philippe,

On Fri, Dec 01, 2017 at 10:13:27AM +0100, Philippe Ombredanne wrote:
> Erik,
> 
> On Fri, Dec 1, 2017 at 9:58 AM, Erick Chen <erick.chen@xxxxxxxxxxxxxx> wrote:
> > Add regulator driver for Spreadtrum SC2731 device.
> > It has 17 general purpose LDOs, BUCKs generator and
> > digital output to control regulators.
> >
> > Signed-off-by: Erick Chen <erick.chen@xxxxxxxxxxxxxx>
> > Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
> > ---
> >  drivers/regulator/Kconfig            |    7 +
> >  drivers/regulator/Makefile           |    1 +
> >  drivers/regulator/sc2731-regulator.c |  276 ++++++++++++++++++++++++++++++++++
> >  3 files changed, 284 insertions(+)
> >  create mode 100644 drivers/regulator/sc2731-regulator.c
> >
> > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> > index 96cd55f..b27417c 100644
> > --- a/drivers/regulator/Kconfig
> > +++ b/drivers/regulator/Kconfig
> > @@ -744,6 +744,13 @@ config REGULATOR_S5M8767
> >          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
> >          supports DVS mode with 8bits of output voltage control.
> >
> > +config REGULATOR_SC2731
> > +       tristate "Spreadtrum SC2731 power regulator driver"
> > +       depends on MFD_SC27XX_PMIC || COMPILE_TEST
> > +       help
> > +         This driver provides support for the voltage regulators on the
> > +         SC2731 PMIC.
> > +
> >  config REGULATOR_SKY81452
> >         tristate "Skyworks Solutions SKY81452 voltage regulator"
> >         depends on MFD_SKY81452
> > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> > index 80ffc57..19fea09 100644
> > --- a/drivers/regulator/Makefile
> > +++ b/drivers/regulator/Makefile
> > @@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_RT5033)        += rt5033-regulator.o
> >  obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
> >  obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
> >  obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
> > +obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
> >  obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
> >  obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
> >  obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
> > diff --git a/drivers/regulator/sc2731-regulator.c b/drivers/regulator/sc2731-regulator.c
> > new file mode 100644
> > index 0000000..e56448a
> > --- /dev/null
> > +++ b/drivers/regulator/sc2731-regulator.c
> > @@ -0,0 +1,276 @@
> > +/*
> > + * Copyright (C) 2017 Spreadtrum Communications Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0
> > + */
> 
> I think that per Linus, and Thomas doc patches for SPDX ids this
> should be instead either:
> 
> > +// SPDX-License-Identifier: GPL-2.0
> > + // Copyright (c) 2017 Spreadtrum Communications Inc.
> 
> or at least this with the id on the first and the // comment style
>

Thanks for pointing out this, and I will modify them in next version.
 
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2017 Spreadtrum Communications Inc.
> > + *
> > + */