Re: xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]

[Alexey Brodkin]

Hi Jose,

On Mon, 2017-12-04 at 15:55 +0000, Jose Abreu wrote:
> On 04-12-2017 14:53, Alexey Brodkin wrote:
> > 
> > Full log you may find below.
> 
> Sorry but I meant /var/log/Xorg.0.log file.

Ooops... sorry... here is it.

-Alexey



# cat /var/log/Xorg.0.logÂ
[ÂÂÂÂ30.345]Â
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ÂÂÂÂ30.345] X Protocol Version 11, Revision 0
[ÂÂÂÂ30.345] Build Operating System: Linux 3.10.0-514.el7.x86_64 x86_64Â
[ÂÂÂÂ30.346] Current Operating System: Linux axs103 4.14.2-00008-g95be6f762b7f-dirty #68 SMP PREEMPT Mon Dec 4 16:12:46 MSK 2017 arc
[ÂÂÂÂ30.346] Kernel command line: earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1 drm.debug=0x1e
[ÂÂÂÂ30.346] Build Date: 01 December 2017ÂÂ12:21:28PM
[ÂÂÂÂ30.346]ÂÂ
[ÂÂÂÂ30.346] Current version of pixman: 0.34.0
[ÂÂÂÂ30.346]ÂÂÂÂBefore reporting problems, check http://wiki.x.org
ÂÂÂÂÂÂÂÂto make sure that you have the latest version.
[ÂÂÂÂ30.346] Markers: (--) probed, (**) from config file, (==) default setting,
ÂÂÂÂÂÂÂÂ(++) from command line, (!!) notice, (II) informational,
ÂÂÂÂÂÂÂÂ(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ÂÂÂÂ30.346] (==) Log file: "/var/log/Xorg.0.log", Time: Thu JanÂÂ1 00:00:30 1970
[ÂÂÂÂ30.346] (==) Using config file: "/etc/X11/xorg.conf"
[ÂÂÂÂ30.346] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ÂÂÂÂ30.347] (==) No Layout section.ÂÂUsing the first Screen section.
[ÂÂÂÂ30.347] (==) No screen section available. Using defaults.
[ÂÂÂÂ30.347] (**) |-->Screen "Default Screen Section" (0)
[ÂÂÂÂ30.347] (**) |ÂÂÂ|-->Monitor "<default monitor>"
[ÂÂÂÂ30.348] (==) No device specified for screen "Default Screen Section".
ÂÂÂÂÂÂÂÂUsing the first device section listed.
[ÂÂÂÂ30.348] (**) |ÂÂÂ|-->Device "Driver0"
[ÂÂÂÂ30.348] (==) No monitor specified for screen "Default Screen Section".
ÂÂÂÂÂÂÂÂUsing a default monitor configuration.
[ÂÂÂÂ30.349] (==) Not automatically adding devices
[ÂÂÂÂ30.349] (==) Not automatically enabling devices
[ÂÂÂÂ30.349] (==) Not automatically adding GPU devices
[ÂÂÂÂ30.349] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ÂÂÂÂ30.349] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[ÂÂÂÂ30.349]ÂÂÂÂEntry deleted from font path.
[ÂÂÂÂ30.349] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[ÂÂÂÂ30.349]ÂÂÂÂEntry deleted from font path.
[ÂÂÂÂ30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//100dpi/".
[ÂÂÂÂ30.349]ÂÂÂÂEntry deleted from font path.
[ÂÂÂÂ30.349]ÂÂÂÂ(Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/").
[ÂÂÂÂ30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//75dpi/".
[ÂÂÂÂ30.349]ÂÂÂÂEntry deleted from font path.
[ÂÂÂÂ30.350]ÂÂÂÂ(Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[ÂÂÂÂ30.350] (==) FontPath set to:
ÂÂÂÂÂÂÂÂ/usr/share/fonts/X11//misc/,
ÂÂÂÂÂÂÂÂ/usr/share/fonts/X11//Type1/
[ÂÂÂÂ30.350] (==) ModulePath set to "/usr/lib/xorg/modules"
[ÂÂÂÂ30.350] (==) |-->Input Device "<default pointer>"
[ÂÂÂÂ30.350] (==) |-->Input Device "<default keyboard>"
[ÂÂÂÂ30.350] (==) No Layout section. Using the default mouse configuration.
[ÂÂÂÂ30.350] (==) No Layout section. Using the default keyboard configuration.
[ÂÂÂÂ30.350] (II) Loader magic: 0x178528
[ÂÂÂÂ30.350] (II) Module ABI versions:
[ÂÂÂÂ30.350]ÂÂÂÂX.Org ANSI C Emulation: 0.4
[ÂÂÂÂ30.350]ÂÂÂÂX.Org Video Driver: 23.0
[ÂÂÂÂ30.350]ÂÂÂÂX.Org XInput driver : 24.1
[ÂÂÂÂ30.350]ÂÂÂÂX.Org Server Extension : 10.0
[ÂÂÂÂ30.350] (II) LoadModule: "armada"
[ÂÂÂÂ30.351] (II) Loading /usr/lib/xorg/modules/drivers/armada_drv.so
[ÂÂÂÂ30.352] (II) Module armada: vendor="X.Org Foundation"
[ÂÂÂÂ30.352]ÂÂÂÂcompiled for 1.19.5, module version = 0.0.0
[ÂÂÂÂ30.352]ÂÂÂÂModule class: X.Org Video Driver
[ÂÂÂÂ30.352]ÂÂÂÂABI class: X.Org Video Driver, version 23.0
[ÂÂÂÂ30.352] (II) LoadModule: "mouse"
[ÂÂÂÂ30.352] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ÂÂÂÂ30.353] (II) Module mouse: vendor="X.Org Foundation"
[ÂÂÂÂ30.353]ÂÂÂÂcompiled for 1.19.5, module version = 1.9.2
[ÂÂÂÂ30.353]ÂÂÂÂModule class: X.Org XInput Driver
[ÂÂÂÂ30.353]ÂÂÂÂABI class: X.Org XInput driver, version 24.1
[ÂÂÂÂ30.353] (II) LoadModule: "kbd"
[ÂÂÂÂ30.353] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ÂÂÂÂ30.353] (II) Module kbd: vendor="X.Org Foundation"
[ÂÂÂÂ30.353]ÂÂÂÂcompiled for 1.19.5, module version = 1.9.0
[ÂÂÂÂ30.354]ÂÂÂÂModule class: X.Org XInput Driver
[ÂÂÂÂ30.354]ÂÂÂÂABI class: X.Org XInput driver, version 24.1
[ÂÂÂÂ30.354] (II) armada: Support for Marvell LCD Controller: 88AP510
[ÂÂÂÂ30.354] (II) armada: Support for Freescale IPU: i.MX6
[ÂÂÂÂ30.354] (II) armada: Support DisplayLink USB2.0: UDL
[ÂÂÂÂ30.354] (--) using VT number 2

[ÂÂÂÂ30.354] (WW) Falling back to old probe method for armada
[ÂÂÂÂ30.357] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ÂÂÂÂ30.357] (II) armada(0): hardware: udl
[ÂÂÂÂ30.357] (II) armada(0): Creating default Display subsection in Screen section
ÂÂÂÂÂÂÂÂ"Default Screen Section" for depth/fbbpp 24/32
[ÂÂÂÂ30.357] (==) armada(0): Depth 24, (--) framebuffer bpp 32
[ÂÂÂÂ30.357] (==) armada(0): RGB weight 888
[ÂÂÂÂ30.357] (==) armada(0): Default visual is TrueColor
[ÂÂÂÂ30.358] (**) armada(0): Option "XvAccel" "TRUE"
[ÂÂÂÂ30.358] (**) armada(0): Option "XvPreferOverlay" "TRUE"
[ÂÂÂÂ30.358] (**) armada(0): Option "UseGPU" "TRUE"
[ÂÂÂÂ30.358] (**) armada(0): Option "AccelModule" "etnadrm_gpu"
[ÂÂÂÂ30.358] (II) Loading sub module "etnadrm_gpu"
[ÂÂÂÂ30.358] (II) LoadModule: "etnadrm_gpu"
[ÂÂÂÂ30.358] (II) Loading /usr/lib/xorg/modules/drivers/etnadrm_gpu.so
[ÂÂÂÂ30.359] (II) Module Etnaviv GPU driver (DRM): vendor="X.Org Foundation"
[ÂÂÂÂ30.359]ÂÂÂÂcompiled for 1.19.5, module version = 0.0.0
[ÂÂÂÂ30.359]ÂÂÂÂABI class: X.Org ANSI C Emulation, version 0.4
[ÂÂÂÂ30.359] (**) armada(0): Option "DRI" "TRUE"
[ÂÂÂÂ30.558] (II) armada(0): Output DVI1 has no monitor section
[ÂÂÂÂ30.727] (II) armada(0): EDID for output DVI1
[ÂÂÂÂ30.727] (II) armada(0): Manufacturer: DELÂÂModel: 4072ÂÂSerial#: 1110979404
[ÂÂÂÂ30.727] (II) armada(0): Year: 2011ÂÂWeek: 32
[ÂÂÂÂ30.728] (II) armada(0): EDID Version: 1.3
[ÂÂÂÂ30.728] (II) armada(0): Digital Display Input
[ÂÂÂÂ30.728] (II) armada(0): Max Image Size [cm]: horiz.: 51ÂÂvert.: 29
[ÂÂÂÂ30.728] (II) armada(0): Gamma: 2.20
[ÂÂÂÂ30.728] (II) armada(0): DPMS capabilities: StandBy Suspend Off
[ÂÂÂÂ30.728] (II) armada(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4Â
[ÂÂÂÂ30.728] (II) armada(0): First detailed timing is preferred mode
[ÂÂÂÂ30.728] (II) armada(0): redX: 0.638 redY: 0.330ÂÂÂgreenX: 0.312 greenY: 0.623
[ÂÂÂÂ30.728] (II) armada(0): blueX: 0.150 blueY: 0.068ÂÂÂwhiteX: 0.313 whiteY: 0.329
[ÂÂÂÂ30.728] (II) armada(0): Supported established timings:
[ÂÂÂÂ30.728] (II) armada(0): 720x400@70Hz
[ÂÂÂÂ30.728] (II) armada(0): 640x480@60Hz
[ÂÂÂÂ30.728] (II) armada(0): 640x480@75Hz
[ÂÂÂÂ30.728] (II) armada(0): 800x600@60Hz
[ÂÂÂÂ30.728] (II) armada(0): 800x600@75Hz
[ÂÂÂÂ30.728] (II) armada(0): 1024x768@60Hz
[ÂÂÂÂ30.729] (II) armada(0): 1024x768@75Hz
[ÂÂÂÂ30.729] (II) armada(0): 1280x1024@75Hz
[ÂÂÂÂ30.729] (II) armada(0): Manufacturer's mask: 0
[ÂÂÂÂ30.729] (II) armada(0): Supported standard timings:
[ÂÂÂÂ30.729] (II) armada(0): #0: hsize: 1152ÂÂvsize 864ÂÂrefresh: 75ÂÂvid: 20337
[ÂÂÂÂ30.729] (II) armada(0): #1: hsize: 1280ÂÂvsize 1024ÂÂrefresh: 60ÂÂvid: 32897
[ÂÂÂÂ30.729] (II) armada(0): #2: hsize: 1920ÂÂvsize 1080ÂÂrefresh: 60ÂÂvid: 49361
[ÂÂÂÂ30.729] (II) armada(0): Supported detailed timing:
[ÂÂÂÂ30.729] (II) armada(0): clock: 148.5 MHzÂÂÂImage Size:ÂÂ510 x 287 mm
[ÂÂÂÂ30.729] (II) armada(0): h_active: 1920ÂÂh_sync: 2008ÂÂh_sync_end 2052 h_blank_end 2200 h_border: 0
[ÂÂÂÂ30.729] (II) armada(0): v_active: 1080ÂÂv_sync: 1084ÂÂv_sync_end 1089 v_blanking: 1125 v_border: 0
[ÂÂÂÂ30.729] (II) armada(0): Serial No: 59DJP189B83L
[ÂÂÂÂ30.729] (II) armada(0): Monitor name: DELL U2312HM
[ÂÂÂÂ30.729] (II) armada(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ÂÂÂÂ30.729] (II) armada(0): EDID (in hex):
[ÂÂÂÂ30.729] (II) armada(0):ÂÂÂÂ00ffffffffffff0010ac72404c333842
[ÂÂÂÂ30.729] (II) armada(0):ÂÂÂÂ2015010380331d78ea6ea5a3544f9f26
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ115054a54b00714f8180d1c001010101
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ010101010101023a801871382d40582c
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ4500fe1f1100001e000000ff00353944
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ4a503138394238334c0a000000fc0044
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ454c4c205532333132484d0a000000fd
[ÂÂÂÂ30.730] (II) armada(0):ÂÂÂÂ00384c1e5311000a2020202020200060
[ÂÂÂÂ30.730] (II) armada(0): Printing probed modes for output DVI1
[ÂÂÂÂ30.730] (II) armada(0): Modeline "1920x1080"x60.0ÂÂ148.50ÂÂ1920 2008 2052 2200ÂÂ1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ÂÂÂÂ30.730] (II) armada(0): Modeline "1280x1024"x75.0ÂÂ135.00ÂÂ1280 1296 1440 1688ÂÂ1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "1280x1024"x60.0ÂÂ108.00ÂÂ1280 1328 1440 1688ÂÂ1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "1152x864"x75.0ÂÂ108.00ÂÂ1152 1216 1344 1600ÂÂ864 865 868 900 +hsync +vsync (67.5 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "1024x768"x75.0ÂÂÂ78.75ÂÂ1024 1040 1136 1312ÂÂ768 769 772 800 +hsync +vsync (60.0 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "1024x768"x60.0ÂÂÂ65.00ÂÂ1024 1048 1184 1344ÂÂ768 771 777 806 -hsync -vsync (48.4 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "800x600"x75.0ÂÂÂ49.50ÂÂ800 816 896 1056ÂÂ600 601 604 625 +hsync +vsync (46.9 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "800x600"x60.3ÂÂÂ40.00ÂÂ800 840 968 1056ÂÂ600 601 605 628 +hsync +vsync (37.9 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "640x480"x75.0ÂÂÂ31.50ÂÂ640 656 720 840ÂÂ480 481 484 500 -hsync -vsync (37.5 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "640x480"x59.9ÂÂÂ25.18ÂÂ640 656 752 800ÂÂ480 490 492 525 -hsync -vsync (31.5 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Modeline "720x400"x70.1ÂÂÂ28.32ÂÂ720 738 846 900ÂÂ400 412 414 449 -hsync +vsync (31.5 kHz e)
[ÂÂÂÂ30.731] (II) armada(0): Output DVI1 connected
[ÂÂÂÂ30.731] (II) armada(0): Using exact sizes for initial modes
[ÂÂÂÂ30.732] (II) armada(0): Output DVI1 using initial mode 1920x1080 +0+0
[ÂÂÂÂ30.732] (==) armada(0): Using gamma correction (1.0, 1.0, 1.0)
[ÂÂÂÂ30.732] (==) armada(0): DPI set to (96, 96)
[ÂÂÂÂ30.732] (II) Loading sub module "fb"
[ÂÂÂÂ30.732] (II) LoadModule: "fb"
[ÂÂÂÂ30.732] (II) Loading /usr/lib/xorg/modules/libfb.so
[ÂÂÂÂ30.734] (II) Module fb: vendor="X.Org Foundation"
[ÂÂÂÂ30.734]ÂÂÂÂcompiled for 1.19.5, module version = 1.0.0
[ÂÂÂÂ30.734]ÂÂÂÂABI class: X.Org ANSI C Emulation, version 0.4
[ÂÂÂÂ30.734] (==) Depth 24 pixmap format is 32 bpp
[ÂÂÂÂ30.757] (**) armada(0): Option "HWcursor" "TRUE"
[ÂÂÂÂ30.757] (**) armada(0): Option "HotPlug" "TRUE"
[ÂÂÂÂ30.758] (==) armada(0): Backing store enabled
[ÂÂÂÂ30.758] (==) armada(0): Silken mouse enabled
[ÂÂÂÂ30.758] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[ÂÂÂÂ30.759] (II) armada(0): [DRI2] Setup complete
[ÂÂÂÂ30.759] (II) armada(0): [DRI2]ÂÂÂDRI driver: etnaviv
[ÂÂÂÂ30.759] (II) armada(0): direct rendering: DRI2 enabled
[ÂÂÂÂ30.759] (II) armada(0): No hardware cursor support - disabling hardware cursors
[ÂÂÂÂ30.759] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ÂÂÂÂ30.760] (==) armada(0): DPMS enabled
[ÂÂÂÂ30.763] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[ÂÂÂÂ30.917] (--) RandR disabled
[ÂÂÂÂ30.932] (II) armada(0): etnaviv: A8 target not supported
[ÂÂÂÂ30.932] (II) armada(0): Setting screen physical size to 508 x 285
[ÂÂÂÂ31.175] (II) Using input driver 'mouse' for '<default pointer>'
[ÂÂÂÂ31.175] (**) Option "CorePointer" "on"
[ÂÂÂÂ31.175] (**) <default pointer>: always reports core events
[ÂÂÂÂ31.175] (WW) <default pointer>: No Device specified, looking for one...
[ÂÂÂÂ31.175] (EE) <default pointer>: Cannot find which device to use.
[ÂÂÂÂ31.175] (==) <default pointer>: Protocol: "Auto"
[ÂÂÂÂ31.175] (**) <default pointer>: always reports core events
[ÂÂÂÂ31.175] (EE) xf86OpenSerial: No Device specified.
[ÂÂÂÂ31.176] (EE) <default pointer>: cannot open input device
[ÂÂÂÂ31.176] (EE) PreInit returned 2 for "<default pointer>"
[ÂÂÂÂ31.176] (II) UnloadModule: "mouse"
[ÂÂÂÂ31.176] (II) Using input driver 'kbd' for '<default keyboard>'
[ÂÂÂÂ31.176] (**) Option "CoreKeyboard" "on"
[ÂÂÂÂ31.176] (**) <default keyboard>: always reports core events
[ÂÂÂÂ31.176] (**) <default keyboard>: always reports core events
[ÂÂÂÂ31.176] (**) Option "Protocol" "standard"
[ÂÂÂÂ31.176] (**) Option "XkbRules" "base"
[ÂÂÂÂ31.176] (**) Option "XkbModel" "pc105"
[ÂÂÂÂ31.176] (**) Option "XkbLayout" "us"
[ÂÂÂÂ31.176] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 6)
[ÂÂÂÂ54.810] (II) UnloadModule: "kbd"
[ÂÂÂÂ55.265] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[ÂÂÂÂ55.265] (II) armada(0): [DRI2] Setup complete
[ÂÂÂÂ55.265] (II) armada(0): [DRI2]ÂÂÂDRI driver: etnaviv
[ÂÂÂÂ55.265] (II) armada(0): direct rendering: DRI2 enabled
[ÂÂÂÂ55.266] (II) armada(0): No hardware cursor support - disabling hardware cursors
[ÂÂÂÂ55.266] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ÂÂÂÂ55.266] (==) armada(0): DPMS enabled
[ÂÂÂÂ55.269] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[ÂÂÂÂ55.410] (--) RandR disabled
[ÂÂÂÂ55.425] (II) armada(0): etnaviv: A8 target not supported
[ÂÂÂÂ55.425] (II) armada(0): Setting screen physical size to 508 x 285
[ÂÂÂÂ55.648] (II) Using input driver 'mouse' for '<default pointer>'
[ÂÂÂÂ55.648] (**) Option "CorePointer" "on"
[ÂÂÂÂ55.648] (**) <default pointer>: always reports core events
[ÂÂÂÂ55.649] (WW) <default pointer>: No Device specified, looking for one...
[ÂÂÂÂ55.649] (EE) <default pointer>: Cannot find which device to use.
[ÂÂÂÂ55.649] (==) <default pointer>: Protocol: "Auto"
[ÂÂÂÂ55.649] (**) <default pointer>: always reports core events
[ÂÂÂÂ55.649] (EE) xf86OpenSerial: No Device specified.
[ÂÂÂÂ55.649] (EE) <default pointer>: cannot open input device
[ÂÂÂÂ55.649] (EE) PreInit returned 2 for "<default pointer>"
[ÂÂÂÂ55.649] (II) UnloadModule: "mouse"
[ÂÂÂÂ55.649] (II) Using input driver 'kbd' for '<default keyboard>'
[ÂÂÂÂ55.649] (**) Option "CoreKeyboard" "on"
[ÂÂÂÂ55.649] (**) <default keyboard>: always reports core events
[ÂÂÂÂ55.649] (**) <default keyboard>: always reports core events
[ÂÂÂÂ55.649] (**) Option "Protocol" "standard"
[ÂÂÂÂ55.649] (**) Option "XkbRules" "base"
[ÂÂÂÂ55.650] (**) Option "XkbModel" "pc105"
[ÂÂÂÂ55.650] (**) Option "XkbLayout" "us"