Re: [PATCH v2 08/19] ASoC: tlv320aic31xx: Switch GPIO handling to use gpiod_* API

[Andrew F. Davis]

On 11/29/2017 03:32 PM, Andrew F. Davis wrote:
> Move to using newer gpiod_* GPIO handling functions. This simplifies
> the code and eases dropping platform data in the next patch. Also
> remember GPIO are active low, so set "1" to reset.
> 
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> ---


Kbuild bot seems mad a this one, looks like I need to include
linux/gpio/consumer.h, will fix for v3.


>  sound/soc/codecs/tlv320aic31xx.c | 23 ++++++++++-------------
>  1 file changed, 10 insertions(+), 13 deletions(-)
> 
> diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
> index c84febd991a0..ab03a19f6aaa 100644
> --- a/sound/soc/codecs/tlv320aic31xx.c
> +++ b/sound/soc/codecs/tlv320aic31xx.c
> @@ -157,6 +157,7 @@ struct aic31xx_priv {
>  	u8 i2c_regs_status;
>  	struct device *dev;
>  	struct regmap *regmap;
> +	struct gpio_desc *gpio_reset;
>  	struct aic31xx_pdata pdata;
>  	struct regulator_bulk_data supplies[AIC31XX_NUM_SUPPLIES];
>  	struct aic31xx_disable_nb disable_nb[AIC31XX_NUM_SUPPLIES];
> @@ -1020,8 +1021,8 @@ static int aic31xx_regulator_event(struct notifier_block *nb,
>  		 * Put codec to reset and as at least one of the
>  		 * supplies was disabled.
>  		 */
> -		if (gpio_is_valid(aic31xx->pdata.gpio_reset))
> -			gpio_set_value(aic31xx->pdata.gpio_reset, 0);
> +		if (aic31xx->gpio_reset)
> +			gpiod_set_value(aic31xx->gpio_reset, 1);
>  
>  		regcache_mark_dirty(aic31xx->regmap);
>  		dev_dbg(aic31xx->dev, "## %s: DISABLE received\n", __func__);
> @@ -1073,8 +1074,8 @@ static int aic31xx_power_on(struct snd_soc_codec *codec)
>  	if (ret)
>  		return ret;
>  
> -	if (gpio_is_valid(aic31xx->pdata.gpio_reset)) {
> -		gpio_set_value(aic31xx->pdata.gpio_reset, 1);
> +	if (aic31xx->gpio_reset) {
> +		gpiod_set_value(aic31xx->gpio_reset, 0);
>  		udelay(100);
>  	}
>  	regcache_cache_only(aic31xx->regmap, false);
> @@ -1334,15 +1335,11 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c,
>  	else if (aic31xx->dev->of_node)
>  		aic31xx_pdata_from_of(aic31xx);
>  
> -	if (aic31xx->pdata.gpio_reset) {
> -		ret = devm_gpio_request_one(aic31xx->dev,
> -					    aic31xx->pdata.gpio_reset,
> -					    GPIOF_OUT_INIT_HIGH,
> -					    "aic31xx-reset-pin");
> -		if (ret < 0) {
> -			dev_err(aic31xx->dev, "not able to acquire gpio\n");
> -			return ret;
> -		}
> +	aic31xx->gpio_reset = devm_gpiod_get_optional(aic31xx->dev, "reset",
> +						      GPIOD_OUT_LOW);
> +	if (IS_ERR(aic31xx->gpio_reset)) {
> +		dev_err(aic31xx->dev, "not able to acquire gpio\n");
> +		return PTR_ERR(aic31xx->gpio_reset);
>  	}
>  
>  	for (i = 0; i < ARRAY_SIZE(aic31xx->supplies); i++)
>