Re: [PATCH] power: ltc2941-battery-gauge: Disable continuous monitoring on shutdown

[Mike Looijmans]

ïOn 01-12-17 16:42, Sebastian Reichel wrote:
> Hi,
>
> On Thu, Nov 23, 2017 at 03:41:05PM +0100, Mike Looijmans wrote:
> > The driver sets the fuel gauge to continuous monitoring on startup, for
> > the models that support this. When the board shuts down, the chip remains
> > in that mode, causing a few mA drain on the battery every 2 or 10 seconds.
> >
> > This patch registers a shutdown handler that turns off the monitoring to
> > prevent this battery drain.
> >
> > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> > ---
>
> Thanks, queued. I wonder if you need a second patch to also disable
> the monitoring for suspend (and re-enable on resume)?

For now, yes, that would probably make sense.

The gauge also has "alert" functionality, once that is enabled in the 
driver, the monitoring shouldn't be disabled and the device would even 
be able to wake the system. But that's no concern yet, so just stopping 
it on suspend would be better for now.


> -- Sebastian
>
> >   drivers/power/supply/ltc2941-battery-gauge.c | 25 +++++++++++++++++++++++++
> >   1 file changed, 25 insertions(+)
> >
> > diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
> > index 08e4fd9..4cfa3f0 100644
> > --- a/drivers/power/supply/ltc2941-battery-gauge.c
> > +++ b/drivers/power/supply/ltc2941-battery-gauge.c
> > @@ -60,6 +60,7 @@ enum ltc294x_id {
> >   #define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
> >   	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
> >   #define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
> > +#define LTC294X_REG_CONTROL_ADC_DISABLE(x)	((x) & ~(BIT(7) | BIT(6)))
> >   
> >   struct ltc294x_info {
> >   	struct i2c_client *client;	/* I2C Client pointer */
> > @@ -523,6 +524,29 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
> >   	return 0;
> >   }
> >   
> > +static void ltc294x_i2c_shutdown(struct i2c_client *client)
> > +{
> > +	struct ltc294x_info *info = i2c_get_clientdata(client);
> > +	int ret;
> > +	u8 value;
> > +	u8 control;
> > +
> > +	/* The LTC2941 does not need any special handling */
> > +	if (info->id == LTC2941_ID)
> > +		return;
> > +
> > +	/* Read control register */
> > +	ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
> > +	if (ret < 0)
> > +		return;
> > +
> > +	/* Disable continuous ADC conversion as this drains the battery */
> > +	control = LTC294X_REG_CONTROL_ADC_DISABLE(value);
> > +	if (control != value)
> > +		ltc294x_write_regs(info->client, LTC294X_REG_CONTROL,
> > +			&control, 1);
> > +}
> > +
> >   #ifdef CONFIG_PM_SLEEP
> >   
> >   static int ltc294x_suspend(struct device *dev)
> > @@ -589,6 +613,7 @@ static int ltc294x_resume(struct device *dev)
> >   	},
> >   	.probe		= ltc294x_i2c_probe,
> >   	.remove		= ltc294x_i2c_remove,
> > +	.shutdown	= ltc294x_i2c_shutdown,
> >   	.id_table	= ltc294x_i2c_id,
> >   };
> >   module_i2c_driver(ltc294x_driver);
> > --
> > 1.9.1


--
Mike Looijmans


Kind regards,

Mike Looijmans
System Expert

TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijmans@xxxxxxxxxxxxxxxxx
Website: www.topicproducts.com

Please consider the environment before printing this e-mail