Re: [PATCH net-next] net: phy: meson-gxl: cleanup by defining the control registers

[Andrew Lunn]

On Tue, Dec 05, 2017 at 10:33:34AM +0100, Jerome Brunet wrote:
> From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> 
> Define registers and bits in meson-gxl PHY driver to make a bit
> more human friendly. No functional change


>  static int meson_gxl_config_init(struct phy_device *phydev)
>  {
> -	/* Enable Analog and DSP register Bank access by */
> -	phy_write(phydev, 0x14, 0x0000);
> -	phy_write(phydev, 0x14, 0x0400);
> -	phy_write(phydev, 0x14, 0x0000);
> -	phy_write(phydev, 0x14, 0x0400);
> +	int ret;
>  
> -	/* Write Analog register 23 */
> -	phy_write(phydev, 0x17, 0x8E0D);
> -	phy_write(phydev, 0x14, 0x4417);
> +	/* Write PLL Configuration 1 */
> +	ret = meson_gxl_write_reg(phydev, BANK_ANALOG_DSP, A6_CONFIG_REG,
> +				  A6_CONFIG_PLLMULX4ICH |
> +				  FIELD_PREP(A6_CONFIG_PLLBUFITRIM, 7) |
> +				  A6_CONFIG_PLLRSTVCOPD |
> +				  A6_CONFIG_PLLCPOFF |
> +				  A6_CONFIG_PLL_SRC);
> +	if (ret)
> +		return ret;

This does not look like "No functional Change".

Please can you break this up. First make use of #defines.
That should be a clear "No functional Change".

Then a second patch adding a helper for banked registers?

     Thanks
	Andrew