Re: [PATCH v2 2/2] clocksource: sprd: Add timer driver for Spreadtrum SC9860 platform
From: Baolin Wang
Date: Thu Dec 07 2017 - 05:52:38 EST
Hi Daniel,
On 7 December 2017 at 18:44, Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> wrote:
> On 28/11/2017 03:45, Baolin Wang wrote:
>> The Spreadtrum SC9860 platform will use the architected timers as local
>> clock events, but we also need a broadcast timer device to wakeup the
>> cpus when the cpus are in sleep mode.
>>
>> Thus this patch registers the timer0 to be a broadcast timer supporting
>> periodic and oneshot events.
>
> This changelog is inadequate. It is pointless to explain why you submit
> this driver.
>
> It would be much more interesting to describe the timer internals.
Sure.
>
>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
>> ---
>> Changes since v1:
>> - Change to 32bit counter to avoid build warning.
>> ---
>> drivers/clocksource/Kconfig | 8 ++
>> drivers/clocksource/Makefile | 1 +
>> drivers/clocksource/sprd-timer.c | 211 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 220 insertions(+)
>> create mode 100644 drivers/clocksource/sprd-timer.c
>
> Even if it is not a general rule, can you rename this driver to
> timer-sprd.c ? I would like little by little to converge all the timer
> names to this pattern.
OK.
>
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index c729a88..48c8702 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -441,6 +441,14 @@ config MTK_TIMER
>> help
>> Support for Mediatek timer driver.
>>
>> +config SPRD_TIMER
>> + bool "Spreadtrum timer driver"
>> + depends on GENERIC_CLOCKEVENTS
>
> Remove GENERIC_CLOCKEVENTS because of:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/drivers/clocksource/Kconfig#n2
Yes, here GENERIC_CLOCKEVENTS is redundant.
>
>> + depends on ARCH_SPRD || COMPILE_TEST
>
> Remove the dependency on ARCH_SPRD, the arch's Kconfig must select
> SPRD_TIMER.
>
> Move the COMPILE_TEST as the other drivers.
OK.
>
> bool "Spreadtrum timer driver" if COMPILE_TEST
>
>> + select TIMER_O> + help
>> + Enables the support for the Spreadtrum timer driver.
>> +
>> config SYS_SUPPORTS_SH_MTU2
>> bool
>>
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 72711f1..62bf264 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -54,6 +54,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
>> obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
>> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
>> obj-$(CONFIG_OWL_TIMER) += owl-timer.o
>> +obj-$(CONFIG_SPRD_TIMER) += sprd-timer.o
>>
>> obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
>> obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
>> diff --git a/drivers/clocksource/sprd-timer.c b/drivers/clocksource/sprd-timer.c
>> new file mode 100644
>> index 0000000..e90f948
>> --- /dev/null
>> +++ b/drivers/clocksource/sprd-timer.c
>> @@ -0,0 +1,211 @@
>> +/*
>> + * Copyright (C) 2017 Spreadtrum Communications Inc.
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>
> Please fix the above with proper format (one example in timer-of.c).
OK.
>
>> +#include <linux/clocksource.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/sched_clock.h>
>
> Are you sure you need sched_clock and clocksource ?
Sorry, I forgot to remove them.
>
>> +#include <linux/slab.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>
> These headers won't be needed anymore when using the timer-of API (see
> the init function comment below).
OK.
>
>> +#define TIMER_NAME "sprd_timer"
>> +
>> +#define TIMER_LOAD_LO 0x0
>> +#define TIMER_LOAD_HI 0x4
>> +#define TIMER_VALUE_LO 0x8
>> +#define TIMER_VALUE_HI 0xc
>> +
>> +#define TIMER_CTL 0x10
>> +#define TIMER_CTL_PERIOD_MODE BIT(0)
>> +#define TIMER_CTL_ENABLE BIT(1)
>> +#define TIMER_CTL_64BIT_WIDTH BIT(16)
>> +
>> +#define TIMER_INT 0x14
>> +#define TIMER_INT_EN BIT(0)
>> +#define TIMER_INT_RAW_STS BIT(1)
>> +#define TIMER_INT_MASK_STS BIT(2)
>> +#define TIMER_INT_CLR BIT(3)
>> +
>> +#define TIMER_VALUE_SHDW_LO 0x18
>> +#define TIMER_VALUE_SHDW_HI 0x1c
>> +
>> +#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
>> +
>> +struct sprd_timer_device {
>> + struct clock_event_device ce;
>> + void __iomem *base;
>> + u32 freq;
>> + int irq;
>> +};
>> +
>> +static inline struct sprd_timer_device *
>> +to_sprd_timer(struct clock_event_device *c)
>> +{
>> + return container_of(c, struct sprd_timer_device, ce);
>> +}
>> +
>> +static void sprd_timer_enable(struct sprd_timer_device *timer, u32 flag)
>> +{
>> + u32 val = readl_relaxed(timer->base + TIMER_CTL);
>> +
>> + val |= TIMER_CTL_ENABLE;
>> + if (flag & TIMER_CTL_64BIT_WIDTH)
>> + val |= TIMER_CTL_64BIT_WIDTH;
>> + else
>> + val &= ~TIMER_CTL_64BIT_WIDTH;
>> +
>> + if (flag & TIMER_CTL_PERIOD_MODE)
>> + val |= TIMER_CTL_PERIOD_MODE;
>> + else
>> + val &= ~TIMER_CTL_PERIOD_MODE;
>> +
>> + writel_relaxed(val, timer->base + TIMER_CTL);
>> +}
>> +
>> +static void sprd_timer_disable(struct sprd_timer_device *timer)
>> +{
>> + u32 val = readl_relaxed(timer->base + TIMER_CTL);
>> +
>> + val &= ~TIMER_CTL_ENABLE;
>> + writel_relaxed(val, timer->base + TIMER_CTL);
>> +}
>> +
>> +static void sprd_timer_update_counter(struct sprd_timer_device *timer,
>> + unsigned long cycles)
>> +{
>> + writel_relaxed(cycles & TIMER_VALUE_LO_MASK,
>> + timer->base + TIMER_LOAD_LO);
>> + writel_relaxed(0, timer->base + TIMER_LOAD_HI);
>> +}
>> +
>> +static void sprd_timer_enable_interrupt(struct sprd_timer_device *timer)
>> +{
>> + writel_relaxed(TIMER_INT_EN, timer->base + TIMER_INT);
>> +}
>> +
>> +static void sprd_timer_clear_interrupt(struct sprd_timer_device *timer)
>> +{
>> + u32 val = readl_relaxed(timer->base + TIMER_INT);
>> +
>> + val |= TIMER_INT_CLR;
>> + writel_relaxed(val, timer->base + TIMER_INT);
>> +}
>> +
>> +static int sprd_timer_set_next_event(unsigned long cycles,
>> + struct clock_event_device *ce)
>> +{
>> + struct sprd_timer_device *timer = to_sprd_timer(ce);
>> +
>> + sprd_timer_disable(timer);
>> + sprd_timer_update_counter(timer, cycles);
>> + sprd_timer_enable(timer, 0);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_timer_set_periodic(struct clock_event_device *ce)
>> +{
>> + struct sprd_timer_device *timer = to_sprd_timer(ce);
>> + unsigned long cycles = DIV_ROUND_UP(timer->freq, HZ);
>> +
>> + sprd_timer_disable(timer);
>> + sprd_timer_update_counter(timer, cycles);
>> + sprd_timer_enable(timer, TIMER_CTL_PERIOD_MODE);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_timer_shutdown(struct clock_event_device *ce)
>> +{
>> + struct sprd_timer_device *timer = to_sprd_timer(ce);
>> +
>> + sprd_timer_disable(timer);
>> + return 0;
>> +}
>> +
>> +static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
>> +{
>> + struct sprd_timer_device *timer = dev_id;
>> +
>> + sprd_timer_clear_interrupt(timer);
>> +
>> + if (clockevent_state_oneshot(&timer->ce))
>> + sprd_timer_disable(timer);
>> +
>> + timer->ce.event_handler(&timer->ce);
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void __init sprd_timer_clkevt_init(struct sprd_timer_device *timer)
>> +{
>> + timer->ce.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
>> + CLOCK_EVT_FEAT_ONESHOT;
>> + timer->ce.set_next_event = sprd_timer_set_next_event;
>> + timer->ce.set_state_periodic = sprd_timer_set_periodic;
>> + timer->ce.set_state_shutdown = sprd_timer_shutdown;
>> + timer->ce.name = TIMER_NAME;
>> + timer->ce.rating = 300;
>> + timer->ce.irq = timer->irq;
>> + timer->ce.cpumask = cpu_possible_mask;
>> +
>> + sprd_timer_enable_interrupt(timer);
>> + clockevents_config_and_register(&timer->ce, timer->freq, 1, UINT_MAX);
>> +}
>> +
>> +static int __init sprd_timer_init(struct device_node *np)
>> +{
>> + struct sprd_timer_device *timer;
>> + int ret;
>> +
>> + timer = kzalloc(sizeof(*timer), GFP_KERNEL);
>> + if (!timer)
>> + return -ENOMEM;
>> +
>> + ret = of_property_read_u32(np, "clock-frequency", &timer->freq);
>> + if (ret) {
>> + pr_err("failed to get clock frequency\n");
>> + goto err_freq;
>> + }
>> +
>> + timer->base = of_iomap(np, 0);
>> + if (!timer->base) {
>> + pr_err("%s: unable to map resource\n", np->name);
>> + ret = -ENXIO;
>> + goto err_freq;
>> + }
>> +
>> + timer->irq = irq_of_parse_and_map(np, 0);
>> + if (timer->irq < 0) {
>> + pr_crit("%s: unable to parse timer irq\n", np->name);
>> + ret = timer->irq;
>> + goto err_map_irq;
>> + }
>> +
>> + ret = request_irq(timer->irq, sprd_timer_interrupt, IRQF_TIMER,
>> + TIMER_NAME, timer);
>> + if (ret) {
>> + pr_err("failed to setup irq %d\n", timer->irq);
>> + goto err_request_irq;
>> + }
>> + sprd_timer_clkevt_init(timer);
>
> Please use the timer-of API, that will save you all these operations and
> checks.
>
> One example at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/sun4i_timer.c#n143
>
> And then use the function:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/sun4i_timer.c#n174
>
I missed timer-of APIs, and I will check it and use timer-of APIs.
Really appreciated for your useful comments.
--
Baolin.wang
Best Regards