Re: [PATCH v2 0/8] arm64: Add initial Actions Semi S700 and CubieBoard7 support

[Andreas FÃrber]

Am 07.12.2017 um 10:20 schrieb Daniel Lezcano:
> On 14/11/2017 00:34, Andreas FÃrber wrote:
>> Hello,
>>
>> This series prepares the Actions Semi S700 SoC and Cubietech CubieBoard7.
>> It boots equally far as the S900 based Bubblegum-96 these patches are based on,
>> i.e. into an initrd with serial and all four cores up.
>>
>> v2 modifies the clocksource driver patches and adds SPS patches.
>>
>> Not having succeeded to replace the bootloader on eMMC or to try
>> booting from SD, the only working way I've found to boot mainline kernels
>> appears to be booting into Android, then issuing "reboot bootloader". U-Boot
>> is lacking the saveenv command, so it wasn't possible to change the bootdelay
>> to facilitate this.
> 
> Is it possible this change fixes your issue ?
> 
> http://git.denx.de/?p=u-boot.git;a=commit;h=c9e87ba66540cf72c164674a71af43853d087ba8

Actions is not yet supported in mainline U-Boot, and S500 boards did not
have a problem there. The saveenv command is simply not enabled in this
config deployed by Cubietech. Since I have not succeeded in getting a
self-built U-Boot booted from SD, I cannot test individual commits on
top either.

Maybe Cubietech or Actions can comment?

Regards,
Andreas

>> Cf. https://en.opensuse.org/HCL:CubieBoard7

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 NÃrnberg, Germany
GF: Felix ImendÃrffer, Jane Smithard, Graham Norton
HRB 21284 (AG NÃrnberg)