Re: [PATCH net-next v2 3/8] net: phy: meson-gxl: add read and write helpers for bank registers

[Neil Armstrong]

On 07/12/2017 16:46, Andrew Lunn wrote:
> On Thu, Dec 07, 2017 at 03:27:10PM +0100, Jerome Brunet wrote:
>> Add read and write helpers to manipulate banked registers on this PHY
>> This helps clarify the settings applied to these registers in the init
>> function and upcoming changes.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
>> ---
>>  drivers/net/phy/meson-gxl.c | 103 ++++++++++++++++++++++++++++----------------
>>  1 file changed, 67 insertions(+), 36 deletions(-)
>>
>> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
>> index d82aa8cea401..05054770aefb 100644
>> --- a/drivers/net/phy/meson-gxl.c
>> +++ b/drivers/net/phy/meson-gxl.c
>> @@ -45,11 +45,13 @@
>>  #define FR_PLL_DIV0	0x1c
>>  #define FR_PLL_DIV1	0x1d
>>  
>> -static int meson_gxl_config_init(struct phy_device *phydev)
>> +static int meson_gxl_open_banks(struct phy_device *phydev)
> 
> Hi Jerome
> 
> Does the word bank come from the datasheet? Most of the phy drives use
> page instead.

Yes, it's explicitly described as banks in the datasheet.

Neil

> 
> Also, we have discovered a race condition which affects drivers using
> pages, which can lead to corruption of registers. At some point, i
> expect we will be adding helpers to access paged registers, which do
> the right thing with respect to locks.
> 
> So it would be nice if you used the work page, not bank.
> 
>    Thanks
> 
>       Andrew
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>