[PATCH v2 00/13] MIPS: add support for the Microsemi MIPS SoCs

From: Alexandre Belloni
Date: Fri Dec 08 2017 - 10:49:16 EST


Hi,

This patch series adds initial support for the Microsemi MIPS SoCs. It
is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).

It adds support for the IRQ controller, pinmux and gpio controller and
reset control.

This produces a kernel that can boot to the console.

This is a single series for reference but it can also be taken
separately by each maintainer as each drivers are independant.

Changes in v2:
- removed the wildcard in MAINAINERS
- corrected the Cc list
- added proper documentation for both syscons
- removed the mscc,cpucontrol property
- updated the ranges property in the ocelot dtsi

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx


Alexandre Belloni (13):
dt-bindings: Add vendor prefix for Microsemi Corporation
dt-bindings: interrupt-controller: Add binding for the Microsemi
Ocelot interrupt controller
irqchip: Add a driver for the Microsemi Ocelot controller
dt-bindings: pinctrl: Add bindings for Microsemi Ocelot
pinctrl: Add Microsemi Ocelot SoC driver
dt-bindings: mips: Add bindings for Microsemi SoCs
dt-bindings: power: reset: Document ocelot-reset binding
power: reset: Add a driver for the Microsemi Ocelot reset
MIPS: mscc: Add initial support for Microsemi MIPS SoCs
MIPS: mscc: add ocelot dtsi
MIPS: mscc: add ocelot PCB123 device tree
MIPS: defconfigs: add a defconfig for Microsemi SoCs
MAINTAINERS: Add entry for Microsemi MIPS SoCs

.../interrupt-controller/mscc,ocelot-icpu-intr.txt | 22 +
Documentation/devicetree/bindings/mips/mscc.txt | 46 ++
.../bindings/pinctrl/mscc,ocelot-pinctrl.txt | 39 ++
.../bindings/power/reset/ocelot-reset.txt | 17 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 24 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/mscc/Makefile | 6 +
arch/mips/boot/dts/mscc/ocelot.dtsi | 115 +++++
arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 ++
arch/mips/configs/mscc_defconfig | 84 ++++
arch/mips/mscc/Makefile | 11 +
arch/mips/mscc/Platform | 12 +
arch/mips/mscc/setup.c | 106 +++++
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-mscc-ocelot.c | 109 +++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ocelot.c | 505 +++++++++++++++++++++
drivers/power/reset/Kconfig | 7 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/ocelot-reset.c | 86 ++++
25 files changed, 1244 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
create mode 100644 arch/mips/boot/dts/mscc/Makefile
create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
create mode 100644 arch/mips/configs/mscc_defconfig
create mode 100644 arch/mips/mscc/Makefile
create mode 100644 arch/mips/mscc/Platform
create mode 100644 arch/mips/mscc/setup.c
create mode 100644 drivers/irqchip/irq-mscc-ocelot.c
create mode 100644 drivers/pinctrl/pinctrl-ocelot.c
create mode 100644 drivers/power/reset/ocelot-reset.c

--
2.15.1