[PATCH 04/19] scsi: hisi_sas: optimise port id refresh function

[John Garry]

From: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>

Currently refreshing the PHY port id after reset is
done in the rescan topology function, which is quite
late in the reset process. It could be moved earlier in
the process, as the port id can be refreshed once the
PHYs become ready.

In addition to this, we should set the hisi_sas_dev port
id to 0xff (invalid port id) if all PHYs of this port remain
down for the same device.

Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 48 ++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 6446ce2..326ecb2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -990,27 +990,42 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
 				sizeof(ssp_task), tmf);
 }
 
-static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba,
-		struct asd_sas_port *sas_port, enum sas_linkrate linkrate)
+static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
 {
-	struct hisi_sas_device	*sas_dev;
-	struct domain_device *device;
+	u32 state = hisi_hba->hw->get_phys_state(hisi_hba);
 	int i;
 
 	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
-		sas_dev = &hisi_hba->devices[i];
-		device = sas_dev->sas_device;
+		struct hisi_sas_device *sas_dev = &hisi_hba->devices[i];
+		struct domain_device *device = sas_dev->sas_device;
+		struct asd_sas_port *sas_port;
+		struct hisi_sas_port *port;
+		struct hisi_sas_phy *phy = NULL;
+		struct asd_sas_phy *sas_phy;
+
 		if ((sas_dev->dev_type == SAS_PHY_UNUSED)
-				|| !device || (device->port != sas_port))
+				|| !device || !device->port)
 			continue;
 
-		hisi_hba->hw->clear_itct(hisi_hba, sas_dev);
+		sas_port = device->port;
+		port = to_hisi_sas_port(sas_port);
+
+		list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el)
+			if (state & BIT(sas_phy->id)) {
+				phy = sas_phy->lldd_phy;
+				break;
+			}
+
+		if (phy) {
+			port->id = phy->port_id;
 
-		/* Update linkrate of directly attached device. */
-		if (!device->parent)
-			device->linkrate = linkrate;
+			/* Update linkrate of directly attached device. */
+			if (!device->parent)
+				device->linkrate = phy->sas_phy.linkrate;
 
-		hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+			hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+		} else
+			port->id = 0xff;
 	}
 }
 
@@ -1025,21 +1040,17 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
 		struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 		struct asd_sas_phy *sas_phy = &phy->sas_phy;
 		struct asd_sas_port *sas_port = sas_phy->port;
-		struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
 		bool do_port_check = !!(_sas_port != sas_port);
 
 		if (!sas_phy->phy->enabled)
 			continue;
 
 		/* Report PHY state change to libsas */
-		if (state & (1 << phy_no)) {
-			if (do_port_check && sas_port) {
+		if (state & BIT(phy_no)) {
+			if (do_port_check && sas_port && sas_port->port_dev) {
 				struct domain_device *dev = sas_port->port_dev;
 
 				_sas_port = sas_port;
-				port->id = phy->port_id;
-				hisi_sas_refresh_port_id(hisi_hba,
-						sas_port, sas_phy->linkrate);
 
 				if (DEV_IS_EXPANDER(dev->dev_type))
 					sas_ha->notify_port_event(sas_phy,
@@ -1088,6 +1099,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	/* Init and wait for PHYs to come up and all libsas event finished. */
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
+	hisi_sas_refresh_port_id(hisi_hba);
 	drain_workqueue(hisi_hba->wq);
 	drain_workqueue(shost->work_q);
 
-- 
1.9.1