[PATCH] usb: dwc2: host: Fix transaction errors in host mode

[Minas Harutyunyan]

Added missing GUSBCFG programming in host mode, which fixes
transaction errors issue on HiKey and Altera Cyclone V boards.

These field even if was programmed in device mode (in function
dwc2_hsotg_core_init_disconnected()) will be resetting to POR values
after core soft reset applied.
So, each time when switching to host mode required to set this field
to correct value.

Signed-off-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/hcd.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 614bb9603def..aa8390122408 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2317,10 +2317,22 @@ static int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
  */
 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
 {
-	u32 hcfg, hfir, otgctl;
+	u32 hcfg, hfir, otgctl, usbcfg, val;
 
 	dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
 
+	/* Set HS/FS Timeout Calibration to 7 (max available value).
+	 * The number of PHY clocks that the application programs in
+	 * this field is added to the high/full speed interpacket timeout
+	 * duration in the core to account for any additional delays
+	 * introduced by the PHY. This can be required, because the delay
+	 * introduced by the PHY in generating the linestate condition
+	 * can vary from one PHY to another.
+	 */
+	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+	usbcfg |= GUSBCFG_TOUTCAL(7);
+	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
 	/* Restart the Phy Clock */
 	dwc2_writel(0, hsotg->regs + PCGCTL);
 
-- 
2.11.0