Re: Oops on 4.15-rc[123] on shutdown/reboot

From: Chris Clayton
Date: Mon Dec 11 2017 - 12:06:55 EST



On 11/12/17 16:29, Sinan Kaya wrote:
> Hi Chris,
>
>>
>> I'm more than happy to provide additional diagnostics and test proposed fixes. As a starter for ten, I've attached the
>> output from 'lspci -v'. If, however, you need to see the backtrace, I'll need some advice on how to capture that.
>>
>
> Can you open a bugzilla and also share the boot log?
>

Here's the output of dmesg for 4.15.0-rc3. I'll open a bugzilla later and add this and the lspci output that I sent with
my original repoart.

> There must be something unique about your system.
>
> Sinan
>
[ 0.000000] Linux version 4.15.0-rc3 (chris@laptop) (gcc version 7.2.1 20171207 (GCC)) #398 SMP PREEMPT Mon Dec 11 07:46:20 GMT 2017
[ 0.000000] Command line: ro root=/dev/sda2 resume=/dev/sda6 rootfstype=ext4 net.ifnames=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7216fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7217000-0x00000000d721dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d721e000-0x00000000d7a0cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7a0d000-0x00000000d7ca1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7ca2000-0x00000000db4dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db4e0000-0x00000000db82dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db82e000-0x00000000db88afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db88b000-0x00000000db9bcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db9bd000-0x00000000dbffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Notebook W65_67SZ /W65_67SZ , BIOS 1.03.05 02/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ (ptrval)]
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02098000, 0x02098fff] PGTABLE
[ 0.000000] BRK [0x02099000, 0x02099fff] PGTABLE
[ 0.000000] BRK [0x0209a000, 0x0209afff] PGTABLE
[ 0.000000] BRK [0x0209b000, 0x0209bfff] PGTABLE
[ 0.000000] BRK [0x0209c000, 0x0209cfff] PGTABLE
[ 0.000000] BRK [0x0209d000, 0x0209dfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DB993088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DB99FEA8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DB9931A8 00CCFA (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DB9BB080 000040
[ 0.000000] ACPI: APIC 0x00000000DB99FFB8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DB9A0050 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000DB9A0098 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DB9A0140 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A10D8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DB9A1618 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DB9A20F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DB9A2130 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DB9A2168 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A2480 001BFB (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DB9A4080 000EA8 (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000DB9A4F28 000090 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d7216fff]
[ 0.000000] node 0: [mem 0x00000000d721e000-0x00000000d7a0cfff]
[ 0.000000] node 0: [mem 0x00000000d7ca2000-0x00000000db4dffff]
[ 0.000000] node 0: [mem 0x00000000db82e000-0x00000000db88afff]
[ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4173886
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13963 pages used for memmap
[ 0.000000] DMA32 zone: 893602 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7217000-0xd721dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7a0d000-0xd7ca1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb4e0000-0xdb82dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb88b000-0xdb9bcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb9bd000-0xdbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ (ptrval) s105944 r8192 d29224 u262144
[ 0.000000] pcpu-alloc: s105944 r8192 d29224 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4108646
[ 0.000000] Kernel command line: ro root=/dev/sda2 resume=/dev/sda6 rootfstype=ext4 net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Memory: 16324568K/16695544K available (6679K kernel code, 661K rwdata, 2404K rodata, 840K init, 380K bss, 370976K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 4352, nr_irqs: 104, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2494.227 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.45 BogoMIPS (lpj=9976908)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.024000] CPU: Physical Processor ID: 0
[ 0.024000] CPU: Processor Core ID: 0
[ 0.024000] mce: CPU supports 9 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.024000] Freeing SMP alternatives memory: 28K
[ 0.024000] TSC deadline timer enabled
[ 0.024000] smpboot: CPU0: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.040004] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.040035] ... version: 3
[ 0.040036] ... bit width: 48
[ 0.040037] ... generic registers: 4
[ 0.040039] ... value mask: 0000ffffffffffff
[ 0.040040] ... max period: 00007fffffffffff
[ 0.040041] ... fixed-purpose events: 3
[ 0.040042] ... event mask: 000000070000000f
[ 0.048001] Hierarchical SRCU implementation.
[ 0.064001] smp: Bringing up secondary CPUs ...
[ 0.092005] x86: Booting SMP configuration:
[ 0.092006] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.260442] smp: Brought up 1 node, 8 CPUs
[ 0.260442] smpboot: Max logical packages: 1
[ 0.260442] smpboot: Total of 8 processors activated (39907.63 BogoMIPS)
[ 0.264151] devtmpfs: initialized
[ 0.264151] PM: Registering ACPI NVS region [mem 0xd7217000-0xd721dfff] (28672 bytes)
[ 0.264151] PM: Registering ACPI NVS region [mem 0xdb88b000-0xdb9bcfff] (1253376 bytes)
[ 0.264151] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.264151] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.264151] NET: Registered protocol family 16
[ 0.264153] cpuidle: using governor ladder
[ 0.264153] cpuidle: using governor menu
[ 0.264153] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.264153] ACPI: bus type PCI registered
[ 0.264153] PCI: Using configuration type 1 for base access
[ 0.264153] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.268038] ACPI: Added _OSI(Module Device)
[ 0.268040] ACPI: Added _OSI(Processor Device)
[ 0.268042] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.268043] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.268159] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.277662] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.277926] ACPI: Dynamic OEM Table Load:
[ 0.277926] ACPI: SSDT 0xFFFF88040D0D8000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.277926] ACPI: Dynamic OEM Table Load:
[ 0.277926] ACPI: SSDT 0xFFFF88040D120000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.277926] ACPI: Dynamic OEM Table Load:
[ 0.277926] ACPI: SSDT 0xFFFF88040DB85800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.277926] ACPI: EC: EC started
[ 0.277926] ACPI: EC: interrupt blocked
[ 0.277926] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.277926] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.277926] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.277926] ACPI: Interpreter enabled
[ 0.277926] ACPI: (supports S0 S3 S4 S5)
[ 0.277926] ACPI: Using IOAPIC for interrupt routing
[ 0.277926] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.277926] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.284558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.284561] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.284638] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.284756] PCI host bridge to bus 0000:00
[ 0.284758] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.284759] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.284761] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.284762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.284764] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.284765] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.284767] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.284768] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.284770] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.284771] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.284773] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.284778] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.284831] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.284854] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.284917] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.284924] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.284929] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.284931] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.284977] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.284983] pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
[ 0.285048] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.285064] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.285112] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.285152] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.285169] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1e000-0xf7f1e00f 64bit]
[ 0.285221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.285266] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.285284] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f1c000-0xf7f1c3ff]
[ 0.285353] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.285396] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.285409] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.285461] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.285501] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.285553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.285612] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.285664] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.285721] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.285773] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.285829] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.285881] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.285942] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.285960] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b3ff]
[ 0.286029] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.286073] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.286200] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.286213] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.286218] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.286223] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.286229] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.286234] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.286239] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1a000-0xf7f1a7ff]
[ 0.286266] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.286302] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.286316] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f19000-0xf7f190ff 64bit]
[ 0.286332] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.286393] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.286419] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.286462] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.286482] pci 0000:03:00.0: reg 0x10: [mem 0xf7e00000-0xf7e00fff]
[ 0.286596] pci 0000:03:00.0: supports D1 D2
[ 0.286596] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.296015] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.296020] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.296074] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
[ 0.296113] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[ 0.296274] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.308016] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.308021] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.308066] pci 0000:05:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.308086] pci 0000:05:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
[ 0.308211] pci 0000:05:00.0: supports D1 D2
[ 0.308211] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.308260] pci 0000:05:00.2: [10ec:8168] type 00 class 0x020000
[ 0.308280] pci 0000:05:00.2: reg 0x10: [io 0xe000-0xe0ff]
[ 0.308307] pci 0000:05:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.308324] pci 0000:05:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.308397] pci 0000:05:00.2: supports D1 D2
[ 0.308398] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.320016] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.320020] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.320022] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.320026] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.320047] pci_bus 0000:00: on NUMA node 0
[ 0.320539] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[ 0.320578] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15), disabled.
[ 0.320614] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15), disabled.
[ 0.320649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
[ 0.320684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.320719] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.320754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
[ 0.320789] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[ 0.320989] ACPI: EC: interrupt unblocked
[ 0.320995] ACPI: EC: event unblocked
[ 0.321000] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.321002] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.321043] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.321043] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.321043] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.321043] vgaarb: loaded
[ 0.321043] SCSI subsystem initialized
[ 0.321043] libata version 3.00 loaded.
[ 0.321043] ACPI: bus type USB registered
[ 0.321043] usbcore: registered new interface driver usbfs
[ 0.321043] usbcore: registered new interface driver hub
[ 0.321043] usbcore: registered new device driver usb
[ 0.321043] Linux video capture interface: v2.00
[ 0.321043] Advanced Linux Sound Architecture Driver Initialized.
[ 0.321043] PCI: Using ACPI for IRQ routing
[ 0.321043] PCI: pci_cache_line_size set to 64 bytes
[ 0.321043] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.321043] e820: reserve RAM buffer [mem 0xd7217000-0xd7ffffff]
[ 0.321043] e820: reserve RAM buffer [mem 0xd7a0d000-0xd7ffffff]
[ 0.321043] e820: reserve RAM buffer [mem 0xdb4e0000-0xdbffffff]
[ 0.321043] e820: reserve RAM buffer [mem 0xdb88b000-0xdbffffff]
[ 0.321043] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.321043] Bluetooth: Core ver 2.22
[ 0.321043] NET: Registered protocol family 31
[ 0.321043] Bluetooth: HCI device and connection manager initialized
[ 0.321043] Bluetooth: HCI socket layer initialized
[ 0.321043] Bluetooth: L2CAP socket layer initialized
[ 0.321043] Bluetooth: SCO socket layer initialized
[ 0.321043] clocksource: Switched to clocksource hpet
[ 0.321043] pnp: PnP ACPI init
[ 0.321043] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.321043] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.321043] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.321043] system 00:01: [io 0xffff] has been reserved
[ 0.321043] system 00:01: [io 0xffff] has been reserved
[ 0.321043] system 00:01: [io 0xffff] has been reserved
[ 0.321043] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.321043] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.321043] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.321043] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.321043] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.321043] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.321043] system 00:01: [io 0x3322-0x3323] has been reserved
[ 0.321043] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321043] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.321043] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.321043] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.321043] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.321043] pnp 00:05: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
[ 0.321043] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.321043] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321043] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.321043] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.321043] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.321043] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.321043] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.321043] system 00:07: [mem 0xf7ffe000-0xf7ffefff] has been reserved
[ 0.321043] system 00:07: [mem 0xf7fe0000-0xf7fe0fff] has been reserved
[ 0.321043] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321043] pnp: PnP ACPI: found 8 devices
[ 0.325846] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.325872] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.325877] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325885] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.325889] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.325894] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.325898] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.325904] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.325906] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.325910] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.325913] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.325918] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.325919] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.325919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.325920] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.325921] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.325921] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.325922] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.325923] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.325923] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.325924] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.325925] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.325925] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.325926] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.325927] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.325927] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.325980] NET: Registered protocol family 2
[ 0.326048] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.326149] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.326237] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.326254] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.326280] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.326325] NET: Registered protocol family 1
[ 0.326334] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.326607] PCI: CLS 64 bytes, default 64
[ 0.326616] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.326618] software IO TLB [mem 0xd3217000-0xd7217000] (64MB) mapped at [000000008ed28af7-000000000781b2fd]
[ 0.326689] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.326690] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.326691] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.326692] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.326693] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.327029] Initialise system trusted keyrings
[ 0.327055] workingset: timestamp_bits=62 max_order=22 bucket_order=0
[ 0.328024] Key type cifs.spnego registered
[ 0.328027] fuse init (API version 7.26)
[ 0.328727] Key type asymmetric registered
[ 0.328729] Asymmetric key parser 'x509' registered
[ 0.328746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.328748] io scheduler noop registered
[ 0.328765] io scheduler cfq registered (default)
[ 0.328766] io scheduler mq-deadline registered
[ 0.329225] intel_idle: MWAIT substates: 0x42120
[ 0.329226] intel_idle: v0.4.1 model 0x3C
[ 0.329428] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.329481] ACPI: AC Adapter [AC] (on-line)
[ 0.329519] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.329537] ACPI: Power Button [PWRB]
[ 0.329567] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.329583] ACPI: Sleep Button [SLPB]
[ 0.329613] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.329623] ACPI: Lid Switch [LID0]
[ 0.329645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.329652] ACPI: Power Button [PWRF]
[ 0.329948] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.329950] ACPI: Thermal Zone [TZ0] (14 C)
[ 0.330301] ACPI: Battery Slot [BAT0] (battery present)
[ 0.333742] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.333905] Linux agpgart interface v0.103
[ 0.334091] pmd_set_huge: Cannot satisfy [mem 0xf7800000-0xf7a00000] with a huge-page mapping due to MTRR override.
[ 0.334205] [drm] Memory usable by graphics device = 2048M
[ 0.334207] [drm] Replacing VGA console driver
[ 0.340238] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.340240] [drm] Driver supports precise vblank timestamp query.
[ 0.342264] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.367749] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 0.367868] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.368063] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.369422] ahci 0000:00:1f.2: version 3.0
[ 0.369487] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.369510] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x25 impl SATA mode
[ 0.369525] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
[ 0.392112] fbcon: inteldrmfb (fb0) is primary device
[ 0.392601] scsi host0: ahci
[ 0.392867] scsi host1: ahci
[ 0.393100] scsi host2: ahci
[ 0.393227] scsi host3: ahci
[ 0.393303] scsi host4: ahci
[ 0.393385] scsi host5: ahci
[ 0.393413] ata1: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a100 irq 19
[ 0.393413] ata2: DUMMY
[ 0.393414] ata3: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a200 irq 19
[ 0.393415] ata4: DUMMY
[ 0.393415] ata5: DUMMY
[ 0.393416] ata6: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a380 irq 19
[ 0.393435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.393437] ehci-pci: EHCI PCI platform driver
[ 0.393516] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.393521] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.393530] ehci-pci 0000:00:1a.0: debug port 2
[ 0.397433] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.397436] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f1c000
[ 0.412025] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.412054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.412055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.412056] usb usb1: Product: EHCI Host Controller
[ 0.412056] usb usb1: Manufacturer: Linux 4.15.0-rc3 ehci_hcd
[ 0.412057] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.412156] hub 1-0:1.0: USB hub found
[ 0.412159] hub 1-0:1.0: 2 ports detected
[ 0.412316] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.412319] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.412327] ehci-pci 0000:00:1d.0: debug port 2
[ 0.416234] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.416240] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1b000
[ 0.432031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.432056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.432057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.432058] usb usb2: Product: EHCI Host Controller
[ 0.432059] usb usb2: Manufacturer: Linux 4.15.0-rc3 ehci_hcd
[ 0.432059] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.432132] hub 2-0:1.0: USB hub found
[ 0.432135] hub 2-0:1.0: 2 ports detected
[ 0.432215] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.432302] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.432305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.433369] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.433373] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.433429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.433430] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.433431] usb usb3: Product: xHCI Host Controller
[ 0.433431] usb usb3: Manufacturer: Linux 4.15.0-rc3 xhci-hcd
[ 0.433432] usb usb3: SerialNumber: 0000:00:14.0
[ 0.433488] hub 3-0:1.0: USB hub found
[ 0.433501] hub 3-0:1.0: 14 ports detected
[ 0.434014] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.434015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.434037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.434037] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.434038] usb usb4: Product: xHCI Host Controller
[ 0.434038] usb usb4: Manufacturer: Linux 4.15.0-rc3 xhci-hcd
[ 0.434039] usb usb4: SerialNumber: 0000:00:14.0
[ 0.434080] hub 4-0:1.0: USB hub found
[ 0.434088] hub 4-0:1.0: 4 ports detected
[ 0.434258] usbcore: registered new interface driver usb-storage
[ 0.434262] usbcore: registered new interface driver ums-realtek
[ 0.434276] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[ 0.706179] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.707801] ata1.00: ATAPI: MATSHITABD-MLT UJ260AF, 1.00, max UDMA/133
[ 0.708902] ata1.00: configured for UDMA/133
[ 0.955144] i8042: Detected active multiplexing controller, rev 1.1
[ 0.956653] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.956671] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.956681] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.956690] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.956698] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.956809] mousedev: PS/2 mouse device common for all mice
[ 0.957059] rtc_cmos 00:02: RTC can wake from S4
[ 0.957154] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.957174] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.957182] i2c /dev entries driver
[ 0.957337] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 0.957350] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.957893] usbcore: registered new interface driver uvcvideo
[ 0.957893] USB Video Class driver (1.1.1)
[ 0.957897] intel_pstate: Intel P-state driver initializing
[ 0.958233] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.958234] NET: Registered protocol family 17
[ 0.958237] NET: Registered protocol family 15
[ 0.958242] Key type dns_resolver registered
[ 0.959488] microcode: sig=0x306c3, pf=0x10, revision=0x22
[ 0.959603] microcode: Microcode Update Driver: v2.2.
[ 0.959608] sched_clock: Marking stable (959600398, 0)->(938816348, 20784050)
[ 0.959784] registered taskstats version 1
[ 0.959784] Loading compiled-in X.509 certificates
[ 0.960079] rtc_cmos 00:02: setting system clock to 2017-12-11 16:57:18 UTC (1513011438)
[ 0.961229] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.180030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.180038] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.180042] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[ 1.330052] usb 3-6: New USB device found, idVendor=046d, idProduct=c534
[ 1.330053] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.330054] usb 3-6: Product: USB Receiver
[ 1.330054] usb 3-6: Manufacturer: Logitech
[ 1.336362] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.336364] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.336386] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.336387] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.336520] hub 1-1:1.0: USB hub found
[ 1.336536] hub 2-1:1.0: USB hub found
[ 1.336608] hub 1-1:1.0: 6 ports detected
[ 1.336611] hub 2-1:1.0: 8 ports detected
[ 1.340009] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.340015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns
[ 1.456028] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[ 1.605218] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[ 1.605219] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.631712] Console: switching to colour frame buffer device 200x56
[ 1.692193] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.694125] scsi 0:0:0:0: CD-ROM MATSHITA BD-MLT UJ260AF 1.00 PQ: 0 ANSI: 5
[ 1.726514] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.727314] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.728138] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.728194] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.042940] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.358784] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.364099] clocksource: Switched to clocksource tsc
[ 2.371798] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.371800] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.372608] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.499247] ata6.00: ATA-10: ST2000LM007-1R8174, SBK2, max UDMA/133
[ 2.500075] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.523935] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.523937] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.524805] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.562662] ata6.00: configured for UDMA/133
[ 2.563600] scsi 5:0:0:0: Direct-Access ATA ST2000LM007-1R81 SBK2 PQ: 0 ANSI: 5
[ 2.564556] sd 5:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.564577] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 2.565911] sd 5:0:0:0: [sda] 4096-byte physical blocks
[ 2.566523] sd 5:0:0:0: [sda] Write Protect is off
[ 2.567133] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.567138] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.304278] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 3.305999] sd 5:0:0:0: [sda] Attached SCSI disk
[ 3.393012] ALSA device list:
[ 3.393888] No soundcards found.
[ 3.539777] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.540567] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.581535] devtmpfs: mounted
[ 3.582915] Freeing unused kernel memory: 840K
[ 3.583574] Write protecting the kernel read-only data: 12288k
[ 3.584523] Freeing unused kernel memory: 1488K
[ 3.587538] Freeing unused kernel memory: 1692K
[ 3.592106] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.565923] udevd[244]: starting version 3.2.4
[ 5.770589] udevd[245]: starting eudev-3.2.4
[ 6.097773] random: crng init done
[ 6.105819] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.106514] r8169 0000:05:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 6.107821] r8169 0000:05:00.2 eth0: RTL8411 at 0x00000000f723fee4, 80:fa:5b:08:d0:3d, XID 08800880 IRQ 19
[ 6.108531] r8169 0000:05:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.369795] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff8187fc20)
[ 6.464313] usbcore: registered new interface driver btusb
[ 6.477992] Bluetooth: hci0: read Intel version: 3707100180012d0d27
[ 6.478939] Bluetooth: hci0: Intel device is already patched. patch num: 27
[ 6.514294] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C534.0001/input/input10
[ 6.572128] hid-generic 0003:046D:C534.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[ 6.574922] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C534.0002/input/input11
[ 6.604977] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[ 6.605757] snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.606533] snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[ 6.607302] snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
[ 6.608110] snd_hda_codec_via hdaudioC1D0: inputs:
[ 6.608902] snd_hda_codec_via hdaudioC1D0: Internal Mic=0x30
[ 6.609039] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 6.610533] snd_hda_codec_via hdaudioC1D0: Mic=0x2b
[ 6.616479] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 6.632216] hid-generic 0003:046D:C534.0002: input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
[ 6.632231] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 6.632274] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 6.632313] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 6.632489] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 6.632535] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 6.637602] usbcore: registered new interface driver usbhid
[ 6.638422] usbhid: USB HID core driver
[ 8.246886] Adding 16777212k swap on /dev/sda6. Priority:1 extents:1 across:16777212k
[ 8.259204] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.394006] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.863509] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 8.935739] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 9.041400] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 9.135125] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 104.071401] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 104.542968] r8169 0000:05:00.2 eth0: link down
[ 104.543732] r8169 0000:05:00.2 eth0: link down
[ 106.081401] r8169 0000:05:00.2 eth0: link up
[ 107.579177] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 107.580183] Bluetooth: BNEP filters: protocol multicast
[ 107.580987] Bluetooth: BNEP socket layer initialized
[ 145.681195] Bluetooth: RFCOMM TTY layer initialized
[ 145.681200] Bluetooth: RFCOMM socket layer initialized
[ 145.681203] Bluetooth: RFCOMM ver 1.11