[PATCH v8 1/2] mtd: arasan: Add device tree binding documentation

[Naga Sureshkumar Relli]

This patch adds the dts binding document for arasan nand flash
controller.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
---
Changes in v8:
- Updated compatible and clock-names as per Boris comments
Changes in v7:
- Corrected the acronyms those should be in caps 
changes in v6:
- Removed num-cs property
- Separated nandchip from nand controller
changes in v5:
- None
Changes in v4:
- Added num-cs property
- Added clock support
Changes in v3:
- None
Changes in v2:
- None
---
 .../devicetree/bindings/mtd/arasan_nand.txt        | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
new file mode 100644
index 000000000000..1a870153a909
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
@@ -0,0 +1,38 @@
+Arasan NAND Flash Controller with ONFI 3.1 support
+
+Required properties:
+- compatible: Should be "xlnx,zynqmp-nand" or "arasan,nfc-v3p10"
+- reg: Memory map for module access
+- interrupt-parent: Interrupt controller the interrupt is routed through
+- interrupts: Should contain the interrupt for the device
+- clock-name: List of input clocks - "sys", "flash"
+	      (See clock bindings for details)
+- clocks: Clock phandles (see clock bindings for details)
+
+Optional properties:
+- arasan,has-mdma: Enables DMA support
+
+For NAND partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+	nand0: nand@ff100000 {
+		compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
+		reg = <0x0 0xff100000 0x1000>;
+		clock-name = "sys", "flash"
+		clocks = <&misc_clk &misc_clk>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 14 4>;
+		arasan,has-mdma;
+		#address-cells = <1>;
+		#size-cells = <0>
+
+		nand@0 {
+			reg = <0>
+			partition@0 {
+				label = "filesystem";
+				reg = <0x0 0x0 0x1000000>;
+			};
+			(...)
+		};
+	};
-- 
2.13.0