RE: [PATCH v3 2/2] misc: Add Xilinx ZYNQMP VCU logicoreIP init driver

[Dhaval Rajeshbhai Shah]

Hi Randy,

Thanks a lot for the review.

> -----Original Message-----
> From: Randy Dunlap [mailto:rdunlap@xxxxxxxxxxxxx]
> Sent: Thursday, December 14, 2017 10:43 AM
> To: Dhaval Rajeshbhai Shah <DSHAH@xxxxxxxxxx>; arnd@xxxxxxxx;
> gregkh@xxxxxxxxxxxxxxxxxxx; pombredanne@xxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> michal.simek@xxxxxxxxxx; Hyun Kwon <hyunk@xxxxxxxxxx>; Dhaval Rajeshbhai
> Shah <DSHAH@xxxxxxxxxx>
> Subject: Re: [PATCH v3 2/2] misc: Add Xilinx ZYNQMP VCU logicoreIP init driver
> 
> On 12/13/2017 09:55 PM, Dhaval Shah wrote:
> > Xilinx ZYNQMP logicoreIP Init driver is based on the new LogiCoreIP
> > design created. This driver provides the processing system and
> > programmable logic isolation. Set the frequency based on the clock
> > information get from the logicoreIP register set.
> >
> > It is put in drivers/misc as there is no subsystem for this logicoreIP.
> >
> > Signed-off-by: Dhaval Shah <dshah@xxxxxxxxxx>
> > ---
> > Changes since v3:
> >  No Changes.
> > Changes since v2:
> >  * Removed the "default n" from the Kconfig
> >  * More help text added to explain more about the logicoreIP driver
> >  * SPDX id is relocated at top of the file with // style comment
> >  * Removed the export API and header file and make it a single driver
> >    which provides logocoreIP init.
> >  * Provide the information in commit message as well for the why driver
> >    in drivers/misc.
> >
> >  drivers/misc/Kconfig    |  15 ++
> >  drivers/misc/Makefile   |   1 +
> >  drivers/misc/xlnx_vcu.c | 629
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 645 insertions(+)
> >  create mode 100644 drivers/misc/xlnx_vcu.c
> >
> > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index
> > f1a5c23..24ea516 100644
> > --- a/drivers/misc/Kconfig
> > +++ b/drivers/misc/Kconfig
> > @@ -496,6 +496,21 @@ config PCI_ENDPOINT_TEST
> >             Enable this configuration option to enable the host side test driver
> >             for PCI Endpoint.
> >
> > +config XILINX_VCU
> > +       tristate "Xilinx VCU logicoreIP Init"
> > +       help
> 
> Please indent the help text (below) by 2 additional spaces, as documented in
> coding-style.rst.
I will update this.
> 
> > +	  Provides the driver to enable and disable the isolation between the
> > +	  processing system and programmable logic part by using the
> logicoreIP
> > +	  register set. This driver also configure the frequency based on
> > +the
> 
> 	                                 configures
> 
I will update this.
> > +	  clock information get from the logicoreIP register set.
> 
>                     drop   ^get^
> 
I will update this.
> > +
> > +	  If you say yes here you get support for the logcoreIP.
> 
> 	                                              logicoreIP.
> 
> > +
> > +	  If unsure, say N.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called xlnx_vcu.
> > +
> >  source "drivers/misc/c2port/Kconfig"
> >  source "drivers/misc/eeprom/Kconfig"
> >  source "drivers/misc/cb710/Kconfig"
> > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index
> > 5ca5f64..a6bd0b1 100644
> > --- a/drivers/misc/Makefile
> > +++ b/drivers/misc/Makefile
> > @@ -55,6 +55,7 @@ obj-$(CONFIG_CXL_BASE)		+= cxl/
> >  obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
> >  obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
> >  obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
> > +obj-$(CONFIG_XILINX_VCU)	+= xlnx_vcu.o
> >
> >  lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
> >  lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o
> > diff --git a/drivers/misc/xlnx_vcu.c b/drivers/misc/xlnx_vcu.c new
> > file mode 100644 index 0000000..41819f0
> > --- /dev/null
> > +++ b/drivers/misc/xlnx_vcu.c
> > @@ -0,0 +1,629 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Xilinx VCU Init
> > + *
> > + * Copyright (C) 2016 - 2017 Xilinx, Inc.
> > + *
> > + * Contacts   Dhaval Shah <dshah@xxxxxxxxxx>
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/errno.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +> +/* Address map for different registers implemented in the VCU
> > +> +LogiCORE IP. */
> 
> [snip]
> 
> 
> > +/**
> > + * xvcu_read - Read from the VCU register space
> > + * @iomem:	vcu reg space base address
> > + * @offset:	vcu reg offset from base
> > + *
> > + * Return:	Returns 32bit value from VCU register specified
> > + *
> > + */
> > +static u32 xvcu_read(void __iomem *iomem, u32 offset)
> 
> You could inline the read() and write() functions...
> 
I will check and will update if required.
> > +{
> > +	return ioread32(iomem + offset);
> > +}
> > +
> > +/**
> > + * xvcu_write - Write to the VCU register space
> > + * @iomem:	vcu reg space base address
> > + * @offset:	vcu reg offset from base
> > + * @value:	Value to write
> > + */
> > +static void xvcu_write(void __iomem *iomem, u32 offset, u32 value) {
> > +	iowrite32(value, iomem + offset);
> > +}
> > +
> > +/**
> > + * xvcu_write_field_reg - Write to the vcu reg field
> > + * @iomem:	vcu reg space base address
> > + * @offset:	vcu reg offset from base
> > + * @field:	vcu reg field to write to
> > + * @mask:	vcu reg mask
> > + * @shift:	vcu reg number of bits to shift the bitfield
> > + */
> > +static void xvcu_write_field_reg(void __iomem *iomem, int offset,
> > +				u32 field, u32 mask, int shift)
> > +{
> > +	u32 val = xvcu_read(iomem, offset);
> > +
> > +	val &= ~(mask << shift);
> > +	val |= (field & mask) << shift;
> > +
> > +	xvcu_write(iomem, offset, val);
> > +}
> > +
> > +/**
> > + * xvcu_set_vcu_pll_info - Set the VCU PLL info
> > + * @xvcu:	Pointer to the xvcu_device structure
> > + *
> > + * Programming the VCU PLL based on the user configuration
> > + * (ref clock freq, core clock freq, mcu clock freq).
> > + * Core clock frequency has higher priority than mcu clock frequency
> > + * Errors in following cases
> > + *    - When mcu or clock clock get from logicoreIP is 0
> > + *    - When VCU PLL DIV related bits value other than 1
> > + *    - When proper data not found for given data
> > + *    - When sis570_1 clocksource related operation failed
> > + *
> > + * Return:	Returns status, either success or error+reason
> > + */
> > +static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) {
> > +	u32 refclk, coreclk, mcuclk, inte, deci;
> > +	u32 divisor_mcu, divisor_core, fvco;
> > +	u32 clkoutdiv, vcu_pll_ctrl, pll_clk;
> > +	u32 cfg_val, mod, ctrl;
> > +	int ret;
> > +	unsigned int i;
> > +	const struct xvcu_pll_cfg *found = NULL;
> > +
> > +	inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK);
> > +	deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC);
> > +	coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ;
> > +	mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ;
> > +	if (!mcuclk || !coreclk) {
> > +		dev_err(xvcu->dev, "Invalid mcu and core clock data\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	refclk = (inte * MHZ) + (deci * (MHZ / FRAC));
> > +	dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk);
> > +	dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk);
> > +	dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk);
> > +
> > +	clk_disable_unprepare(xvcu->pll_ref);
> > +	ret = clk_set_rate(xvcu->pll_ref, refclk);
> > +	if (ret)
> > +		dev_warn(xvcu->dev, "failed to set logicoreIP refclk rate\n");
> > +
> > +	ret = clk_prepare_enable(xvcu->pll_ref);
> > +	if (ret) {
> > +		dev_err(xvcu->dev, "failed to enable pll_ref clock source\n");
> > +		return ret;
> > +	}
> > +
> > +	refclk = clk_get_rate(xvcu->pll_ref);
> > +
> > +	/* The divide-by-2 should be always enabled (==1)
> 
> multi-line comment style:
> 	/*
> 	 * The divide-by-2 should always be enabled (==1)
> 
I will update this.
> > +	 * to meet the timing in the design.
> > +	 * Otherwise, it's an error
> > +	 */
> > +	vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL);
> > +	clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT;
> > +	clkoutdiv = clkoutdiv && VCU_PLL_CTRL_CLKOUTDIV_MASK;
> > +	if (clkoutdiv != 1) {
> > +		dev_err(xvcu->dev, "clkoutdiv value is invalid\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i > 0; i--) {
> > +		const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i];
> > +
> > +		fvco = cfg->fbdiv * refclk;
> > +		if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) {
> > +			pll_clk = fvco / VCU_PLL_DIV2;
> > +			if (fvco % VCU_PLL_DIV2 != 0)
> > +				pll_clk++;
> > +			mod = pll_clk % coreclk;
> > +			if (mod < LIMIT) {
> > +				divisor_core = pll_clk / coreclk;
> > +			} else if (coreclk - mod < LIMIT) {
> > +				divisor_core = pll_clk / coreclk;
> > +				divisor_core++;
> > +			} else {
> > +				continue;
> > +			}
> > +			if (divisor_core >= DIVISOR_MIN &&
> > +			    divisor_core <= DIVISOR_MAX) {
> > +				found = cfg;
> > +				divisor_mcu = pll_clk / mcuclk;
> > +				mod = pll_clk % mcuclk;
> > +				if (mcuclk - mod < LIMIT)
> > +					divisor_mcu++;
> > +				break;
> > +			}
> > +		}
> > +	}
> > +
> > +	if (!found) {
> > +		dev_err(xvcu->dev, "Invalid clock combination.\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	xvcu->coreclk = pll_clk / divisor_core;
> > +	mcuclk = pll_clk / divisor_mcu;
> > +	dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk);
> > +	dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk);
> > +	dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk);
> > +
> > +	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK <<
> VCU_PLL_CTRL_FBDIV_SHIFT);
> > +	vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) <<
> > +			 VCU_PLL_CTRL_FBDIV_SHIFT;
> > +	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK <<
> > +			  VCU_PLL_CTRL_POR_IN_SHIFT);
> > +	vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT &
> VCU_PLL_CTRL_POR_IN_MASK) <<
> > +			 VCU_PLL_CTRL_POR_IN_SHIFT;
> > +	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK <<
> > +			  VCU_PLL_CTRL_PWR_POR_SHIFT);
> > +	vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT &
> VCU_PLL_CTRL_PWR_POR_MASK) <<
> > +			 VCU_PLL_CTRL_PWR_POR_SHIFT;
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, vcu_pll_ctrl);
> > +
> > +	/* Set divisor for the core and mcu clock */
> > +	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL);
> > +	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
> > +	ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) <<
> > +		 VCU_PLL_DIVISOR_SHIFT;
> > +	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
> > +	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) <<
> VCU_SRCSEL_SHIFT;
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL, ctrl);
> > +
> > +	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL);
> > +	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
> > +	ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) <<
> > +		 VCU_PLL_DIVISOR_SHIFT;
> > +	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
> > +	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) <<
> VCU_SRCSEL_SHIFT;
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL, ctrl);
> > +
> > +	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL);
> > +	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
> > +	ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) <<
> VCU_PLL_DIVISOR_SHIFT;
> > +	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
> > +	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) <<
> VCU_SRCSEL_SHIFT;
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL, ctrl);
> > +
> > +	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL);
> > +	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
> > +	ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) <<
> VCU_PLL_DIVISOR_SHIFT;
> > +	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
> > +	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) <<
> VCU_SRCSEL_SHIFT;
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl);
> > +
> > +	/* Set RES, CP, LFHF, LOCK_CNT and LOCK_DLY cfg values */
> > +	cfg_val = (found->res << VCU_PLL_CFG_RES_SHIFT) |
> > +		   (found->cp << VCU_PLL_CFG_CP_SHIFT) |
> > +		   (found->lfhf << VCU_PLL_CFG_LFHF_SHIFT) |
> > +		   (found->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) |
> > +		   (found->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT);
> > +	xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CFG, cfg_val);
> > +
> > +	return 0;
> > +}
> > +
> > +/**
> > + * xvcu_set_pll - PLL init sequence
> > + * @xvcu:	Pointer to the xvcu_device structure
> > + *
> > + * Call the api to set the PLL info and once that is done then
> > + * init the PLL sequence to make the PLL stable.
> > + *
> > + * Return:	Returns status, either success or error+reason
> > + */
> > +static int xvcu_set_pll(struct xvcu_device *xvcu) {
> > +	u32 lock_status;
> > +	unsigned long timeout;
> > +	int ret;
> > +
> > +	ret = xvcu_set_vcu_pll_info(xvcu);
> > +	if (ret) {
> > +		dev_err(xvcu->dev, "failed to set pll info\n");
> > +		return ret;
> > +	}
> > +
> > +	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
> > +			     1, VCU_PLL_CTRL_BYPASS_MASK,
> > +			     VCU_PLL_CTRL_BYPASS_SHIFT);
> > +	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
> > +			     1, VCU_PLL_CTRL_RESET_MASK,
> > +			     VCU_PLL_CTRL_RESET_SHIFT);
> > +	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
> > +			     0, VCU_PLL_CTRL_RESET_MASK,
> > +			     VCU_PLL_CTRL_RESET_SHIFT);
> > +	/* Defined the timeout for the max time to wait the
> 
> comment style.
> 
I will update this.
> > +	 * PLL_STATUS to be locked.
> > +	 */
> > +	timeout = jiffies + msecs_to_jiffies(2000);
> > +	do {
> > +		lock_status = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_STATUS);
> > +		if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK) {
> > +			xvcu_write_field_reg(xvcu->vcu_slcr_ba,
> VCU_PLL_CTRL,
> > +					     0, VCU_PLL_CTRL_BYPASS_MASK,
> > +					     VCU_PLL_CTRL_BYPASS_SHIFT);
> > +			return 0;
> > +		}
> > +	} while (!time_after(jiffies, timeout));
> > +
> > +	/* PLL is not locked even after the timeout of the 2sec */
> > +	dev_err(xvcu->dev, "PLL is not locked\n");
> > +	return -ETIMEDOUT;
> > +}
> > +
> > +/**
> > + * xvcu_probe - Probe existence of the logicoreIP
> > + *			and initialize PLL
> > + *
> > + * @pdev:	Pointer to the platform_device structure
> > + *
> > + * Return:	Returns 0 on success
> > + *		Negative error code otherwise
> > + */
> > +static int xvcu_probe(struct platform_device *pdev) {
> > +	struct resource *res;
> > +	struct xvcu_device *xvcu;
> > +	int ret;
> > +
> > +	xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
> > +	if (!xvcu)
> > +		return -ENOMEM;
> > +
> > +	xvcu->dev = &pdev->dev;
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "vcu_slcr");
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "get vcu_slcr memory resource
> failed.\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	xvcu->vcu_slcr_ba = devm_ioremap_nocache(&pdev->dev,
> > +			res->start, resource_size(res));
> > +	if (!xvcu->vcu_slcr_ba) {
> > +		dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "logicore");
> > +	if (!res) {
> > +		dev_err(&pdev->dev, "get logicore memory resource
> failed.\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	xvcu->logicore_reg_ba = devm_ioremap_nocache(&pdev->dev,
> > +			res->start, resource_size(res));
> > +	if (!xvcu->logicore_reg_ba) {
> > +		dev_err(&pdev->dev, "logicore register mapping failed.\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
> > +	if (IS_ERR(xvcu->aclk)) {
> > +		dev_err(&pdev->dev, "Could not get aclk clock\n");
> > +		return PTR_ERR(xvcu->aclk);
> > +	}
> > +
> > +	xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
> > +	if (IS_ERR(xvcu->pll_ref)) {
> > +		dev_err(&pdev->dev, "Could not get pll_ref clock\n");
> > +		return PTR_ERR(xvcu->pll_ref);
> > +	}
> > +
> > +	ret = clk_prepare_enable(xvcu->aclk);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "aclk clock enable failed\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_prepare_enable(xvcu->pll_ref);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "pll_ref clock enable failed\n");
> > +		goto error_aclk;
> > +	}
> > +
> > +	/* Do the Gasket isolation and put the VCU out of reset
> 
> comment style.
> 
I will update this.
> > +	 * Bit 0 : Gasket isolation
> > +	 * Bit 1 : put VCU out of reset
> > +	 */
> > +	xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT,
> > +VCU_GASKET_VALUE);
> > +
> > +	/* Do the PLL Settings based on the ref clk,core and mcu clk freq */
> > +	ret = xvcu_set_pll(xvcu);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to set the pll\n");
> > +		goto error_pll_ref;
> > +	}
> > +
> > +	dev_set_drvdata(&pdev->dev, xvcu);
> > +
> > +	dev_info(&pdev->dev, "%s: Probed successfully\n", __func__);
> > +
> > +	return 0;
> > +
> > +error_pll_ref:
> > +	clk_disable_unprepare(xvcu->pll_ref);
> > +error_aclk:
> > +	clk_disable_unprepare(xvcu->aclk);
> > +	return ret;
> > +}
> > +
> > +/**
> > + * xvcu_remove - Insert gasket isolation
> > + *			and disable the clock
> > + * @pdev:	Pointer to the platform_device structure
> > + *
> > + * Return:	Returns 0 on success
> > + *		Negative error code otherwise
> > + */
> > +static int xvcu_remove(struct platform_device *pdev) {
> > +	struct xvcu_device *xvcu;
> > +
> > +	xvcu = platform_get_drvdata(pdev);
> > +	if (!xvcu)
> > +		return -ENODEV;
> > +
> > +	/* Add the the Gasket isolation and put the VCU in reset.
> 
> style.
> 
I will update this.
> > +	 */
> > +	xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
> > +
> > +	clk_disable_unprepare(xvcu->pll_ref);
> > +	clk_disable_unprepare(xvcu->aclk);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id xvcu_of_id_table[] = {
> > +	{ .compatible = "xlnx,vcu" },
> > +	{ .compatible = "xlnx,vcu-logicoreip-1.0" },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, xvcu_of_id_table);
> > +
> > +static struct platform_driver xvcu_driver = {
> > +	.driver = {
> > +		.name           = "xilinx-vcu",
> > +		.of_match_table = xvcu_of_id_table,
> > +	},
> > +	.probe                  = xvcu_probe,
> > +	.remove                 = xvcu_remove,
> > +};
> > +
> > +module_platform_driver(xvcu_driver);
> > +
> > +MODULE_AUTHOR("Dhaval Shah <dshah@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Xilinx VCU init Driver"); MODULE_LICENSE("GPL
> > +v2");
> >
> 
> The code has several divide operations. Does it build OK for 32-bit target?
> 
Yes. I have verified on both 32 bit and 64 bit target.
> --
> ~Randy

Thanks & Regards,
Dhaval