Re: [PATCH v4 1/6] dt: bindings: lp8860: Update bindings for lp8860

[Rob Herring]

On Tue, Dec 12, 2017 at 04:01:38PM -0600, Dan Murphy wrote:
> Update the lp8860 bindings to fix various issues
> found.  Add address-cells and size-cells, rename

You are doing this in the next patch...

> enable-gpio to enable-gpios, update the node name
> to the device name and indent the node example.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> 
> v4 - No changes
> 
> v3 - Indicatd enable-gpios is active high, moved address and size cells to child
> node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/
> v2 - New patch
> 
>  Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> index aad38dd94d4b..b9d09acbaa73 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> @@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input
>  signal, a SPI/I2C master, or both.
>  
>  Required properties:
> -	- compatible:
> +	- compatible :
>  		"ti,lp8860"
> -	- reg -  I2C slave address
> -	- label - Used for naming LEDs
> +	- reg : I2C slave address
> +	- label : Used for naming LEDs
>  
>  Optional properties:
> -	- enable-gpio - gpio pin to enable/disable the device.
> -	- supply - "vled" - LED supply
> +	- enable-gpios : gpio pin to enable (active high)/disable the device.
> +	- vled-supply : LED supply
>  
>  Example:
>  
> -leds: leds@6 {
> +led-controller@2d {
>  	compatible = "ti,lp8860";
>  	reg = <0x2d>;
>  	label = "display_cluster";
> -	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
>  	vled-supply = <&vbatt>;
>  }
>  
> -- 
> 2.15.0.124.g7668cbc60
>